• Restorative Dentistry and Endodontics
• /
• v.36 no.6
• /
• pp.510-514
• /
• 2011

Mineral trioxide aggregate (MTA), which was originally developed for repair of root perforations, is a biocompatible material with numerous clinical applications in endodontics. MTA must be allowed to set in the presence of moisture to optimize the material's physical and chemical properties. In the clinic, occasionally unset MTA has been detected after application of MTA on the tooth, and the reason has been unclear. This case report presents MTA washed-out for several years after placement at the root apex as an apical plug, and discusses the reason and things to consider in clinics.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.709-719
• /
• 1994

The aim of this investigation was to identify which suing is more suitable for uprighting of the 30 degree inclined lower second molar in different situations. Between four different molar uprighting springs which were A, B, C type and T-loop spring, the author tested T-loop suing as a control material and the other springs were experimental group. Each spring was fabricated from .017' $\times$ .025' TMA wire and preactivated with 40 degree tip-back bend. Stabilizing unit included from the lower right central incisor to the lower right second premolar which were made by acrylic resin. The photoelastic overview of the lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature than the mesial of the lower second molar when A type uprighting spring was applied, which can be used as a space regainer. 2. Higher level compression was presented at the mesial root apex area than the distal of the lower second molar in B type uprighting spring, which can be used as a space closer. 3. Areas of higher compression and tension were observed about the mesial and distal root of the lower second moalr than A and B type in C type uprighting spring, which can be used as a partial space regainer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.240-240
• /
• 2016

반도체 양자점은 불연속적인 에너지준위의 특성 때문에 고전적인 빛과는 다른 단일광자를 방출하여 양자정보 처리과정에 기본 요소로써 사용 될 수 있다. III-Nitride (III-N) 반도체 물질은 III족 원소의 구성비를 조절하였을 때 밴드갭 에너지차이가 크므로 깊은 양자 우물을 만들 수 있으며 최근에는 기존에 연구되던 III-Arsenide 기반의 반도체 양자점과 다르게 상온 (300 K) 동작 가능한 단일광자 방출원이 개발되었다.[1] 또한 약한 split-off 에너지 때문에 양자점 모양에 작은 비대칭성만 존재해도 큰 선형편광도를 가질 수 있다. 하지만 III-N 반도체 양자점의 이러한 특성에도 불구하고 이종기판과의 격자상수 불일치에 따른 많은 threading dislocation, 압전효과에 의한 큰 내부전기장에 의해 발광 효율이 떨어지는 등의 문제가 있다. 이를 해결하기 위해 반도체 양자점을 3차원 구조체와 결합하여 threading dislocation 및 내부전기장을 줄이는 연구들이 진행되고 있다.[2] 본 연구에서는 선택적 영역 성장 방식을 통해 마이크로미터 크기를 가지는 피라미드 형태의 3차원 구조체를 이용, 피라미드의 꼭지점에 형성된 InGaN/GaN 양자점의 광학적 특성에 대해 분석하였다. 저온(9 K)에서 마이크로 photoluminescence 측정을 통해 양자점의 발광파장이 피라미드의 옆면의 파장과는 다름을 확인하였다. 여기광의 세기에 따른 양자점의 발광 세기 측정하여 여기광에 선형 비례함을 보이고, 양자점의 편광도를 측정하여 선형 편광임을 확인하였다. 마지막으로, 광량에 대해 시간에 따른 상관관계를 측정함으로써 양자점이 양자 발광체의 특성을 보이는 지 확인하였다.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.28-34
• /
• 2017

An NIR grism Si optical area sensor spectrometer with in-band reference wavelength is designed and fabricated. It is composed of a transmission type diffraction grating (spatial density 300 line/mm), a rectangular N-BK7 prism (apex angle 30 degree), NIR filter(cutoff wavelength 720 nm), an imaging convex lens(focal length 50 mm F1.8) and an IR modified DSLR camera (Canon EOS40D) of Si optical area sensor ($3,888{\times}2,592$ pixels, pixel size $5.710{\mu}m$). "In-band reference wavelength function" is implemented using non-dispersive 0th diffraction order optical beam. The NIR grism spectrometer is tested in a laboratory using a halogen lamp and a Neon lamp. And the spectrometer is used in an astronomy field for obtaining the planet Jupiter NIR spectrum. In-band reference wavelength i.e. un-deviation wavelength is 846 nm, an wavelength resolution is 0.3027 nm/pixel, an wavelength resolving power is 2,794 and an wavelength range is 650~1,000 nm.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.748-753
• /
• 2001

The objective of the present study is to visualize the pulsatile flow fields by using three-dimensional computer simulation and the PIV system. A closed flow loop system was built for the steady and unsteady experiments. The Harvard pulsatile pump was used to generate the pulsatile pressure and velocity waveforms. Conifer powder as the tracing particles was added to water to visualize the flow field. Two consecutive particle images were captured by a CCO camera for the image processing at several cross section. The range validation and the area interpolation methods were used to obtain the final velocity vectors with high accuracy. The finite volume predictions were used to analyze three-dimensional flow patterns in the bifurcation model. The results of the PIV experiment and the computer simulation are in good agreement and the results show the recirculation zones and formation of the paired secondary flow distal to the apex of the bifurcated model. The results also show that the branch flow is pushed strongly to the inner wall due to the inertial force effect and helical motions are generated as the flow proceeds toward the outer wall.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.1
• /
• pp.8-15
• /
• 2004

Supersonic jets impinging on $60^{\cire}$ wedge were investigated to obtain fundamental design data for jet deflector It was of interest to study flow phenomena such as shock interaction and separation induced by shear layer. Experiments using supersonic cold flow system were conducted for Schlieren flow visualization and measurement of surface pressure. Numerical results were compared with the experimental results. The major parameters are underexpansion ratio, distance from nozzle to apex and design Mach number. Flow conditions were obtained for the wedge shock to attach on or detach from the wedge. The dominant feature of flow-field is shock pattern induced by the Interaction between the wedge shock and the barrel shock.

• Journal of Periodontal and Implant Science
• /
• v.39 no.3
• /
• pp.375-381
• /
• 2009

Purpose: Root resection can be a valuable procedure when the tooth in question has a high strategic value. The prognosis of root resection has been well documented in previous studies, but the results focused on the palatal root resection have not been discussed in depth. I represent here the short term effectiveness of palatal root resection of maxillary first molars. Methods: Palatal root resection was performed on maxillary first molars of three patients. All the palatal roots were floating state on the radiographic finding and showed full probing depth and purulent exudation at initial examination. Reduction of palatal cusp and occlusal table was performed concomitantly. Endodontic therapy was completed after root resection. Results: Compromised maxillary first molars were treated successfully by palatal root resection in 3 cases. The mobility of resected tooth was decreased a little bit. The probing pocket depth of remaining buccal roots was not increased compared to initial depth. All the patients satisfied with comfort and cost effective results and the fact they could save their natural teeth. Conclusions: Within the above results, palatal root resection is an effective procedure treating compromised maxillary first molar showing advanced palatal bone loss to root apex with or without pulp involvement when proper case selection is performed.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.647-653
• /
• 2007

Rapid crestal bone resorption following maxillary tooth loss is further accentuated in the posterior regions because of pneumatization and enlargement of the maxillary sinuses. A treatment rationale that allows preservation and augmentation of vertical available bone at the time of posterior maxil-lary tooth extraction may offer numerous therapeutic benefits which are more short courses of ther-apy and no needs of additional surgical augmentation. The present study comprised 3 patients who had 4 posterior maxillary teeth with no evident bone between the tooth apex and sinus floor, as estimated through preoperative radiographic analysis. Sinus floor augmentation at the time of tooth extraction was chosen for the ltreatment of these patients. After the tooth was carefully extracted, the empty alveolus was thoroughly debrided and a trephine approach was performed. Particulated autogenous bone was gently pushed beyond the empty alveolus to elevate the sinus membrane using an osteotome. The distance between bone crest and si-nus floor was radiographically estimated 4 months after the first procedure. Another procedure was then carried out to place the implants of 11 mm length without another augmentation procedure. All implant were clinically stable, with no sign of infection. The presented surgical procedure performed at the time of extraction of posterior maxillary teeth in close proximity to the sinus floor allowed placement of implants of proper length.

• Animal Systematics, Evolution and Diversity
• /
• v.17 no.1
• /
• pp.145-153
• /
• 2001

Two new species of the genus Burmoniscus, B. siamenis and B. phanganensis, are described from Ko Samui and Ko Pha Ngan, Thailand. B. siamenis is similar to B. mauritiensis (Taiti and Ferrara, 1983) in color pattern and the shape of telson, but distinguished by the shape of pereonite 7 with obtuse postero-lateral angle and the peculiar shape of male pleopod 2 endopod with truncated apex. B. phanganensis is close to B. ocellatus Verhoeff, 1928) in the shape of pereonite 7 and telson, but easily distinguished by the peculiar shape of male pleopod 1 endopod with two rows of denticles on caudal surface.

• Korean Journal Plant Pathology
• /
• v.11 no.3
• /
• pp.282-284
• /
• 1995

Grey leaf spot on tomato plants was first observed in Sedo-myeon, Puyo-kun, Chungnam province of Korea in 1994. This disease which had not been reported before in Korea exhibited different symptoms from those of other leaf spot diseases on tomato plants. The symptoms were characterized by small irregular-shaped spots on leaves at the initial stage of the infection, subsequent spread and coalescence of the spots throughout the leaves with ultimate necrosis, and abscission from the plants. When healthy tomato plants were inoculated with a conidial suspension of the fungus isolated from the lesion of a diseased plant in a field, the same characteristic symptoms as those in the field were produced. Furthermore, the same pathogen could be reisolated from the lesions formed buy the inoculation. Conidial characteristics of the pathogen were as follows; oblong shape with constricted 3 transverse septa, round-shaped base, round- or point-shaped apex, size of 45~75$\times$12.5~17.5 ${\mu}{\textrm}{m}$, and 3.5 : 1 ratio of length to width. The pathogen was identified as Stemphylium lycopersici and thus this is the first report on the occurrence of grey leaf spot disease on tomato plants caused by s. lycopersici in Korea.