• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.327-334
• /
• 2005

This study investigated the effect of anticurvature filing method on preparation of the curved root canal using ProFile. Thirty six resin blocks were divided equally into three groups by instrumentation motions: anticurvature filing motion. circumferential filing motion and straight up-and-down motion. Each resin block was sectioned at 8mm level from the apex and at the greatest curvature of the canal and reassembled in metal mold by a modified Bramante technique. All groups were instrumented with the ProFile system. At each levels. image of sectioned surface were taken using CCD camera under a stereomicroscope at $\times40$ magnification and stored. Distances of transportation at the inner and outer area of curvature and the centering ratio were determined and compared by statistical analysis. along with the assessment of the increase of root canal cross-sectional area. The results were as follows; 1. In all groups. there was no statistical difference in the mean increase of root canal cross-sectional area. the centering ratio. and the mean distances of transportation at the inner area of curvature at each level. 2. At 8mm level from the apex. the mean distances of transportation at the outer area of curvature decreases in following order anticurvature filing motion. circumferential filing motion. straight up-and­down motion but. no significant difference at the greatest curvature of the canal among three groups. Effect of anticurvature filing motion using ProFile does not seem to be different from other instrumentation motions at the inner area of curvature in curved root canal.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.768-779
• /
• 1995

This study was performed to investigate the effect of root canal shaping techniques on the change of the shape of prepared root canal. 40 mesiobuccal canals of recently extracted mandibular 1st and 2nd molars were divided into 4 groups and shaped by step-down/balanced force technique, step-down/step-back technique, step-back technique and conventional technique respectively. The change of the shape of root canal was traced by superimposing the radiographs obtained before and after shaping of each root canal. The results were as follows. 1. By the experimented techniques except conventional technique, the root canals were more shaped in convex side of apical area and in concave side of most curved and coronal area than in the other sides(P<0.05). By conventional technique, the root canals were more shaped in convex side than in convave side from apex to orifice(P<0.05). 2. By step-down/balanced force technique, the cancave sides at C and D points of proximal view and C point of clinical view were more shaped than the convex side(P<0.05). Through the entire canal, the concave side was more shaped than the convex side in proximal view(P<0.01). But there was no statistical difference between both sides in clinical view. 3. By step-down/step-back technique, the change of root canal shape was not statistically different in concave and convex sides at each point of both views(P>0.05). And through the entire canal in proximal view, there was no statistical difference in shaping percentage between both sides. But through the entire canal in clinical view, the concave side was more shaped than the convex side(P<0.1). 4. By step-back technique, the convex side at B point of clinical more shaped than the other sides(P<0.05). Through the entire canal in proximal and clinical views, there was no statistical difference in shaping percentage between both sides. 5. Comparing the total shaping percentage among techniques, that in conventional technique was the greatest numerically, and followed by the percentages in step-down/step-back, step-down/balanced force and step-back technique. But, in proximal view, shaping percentages were not statistically different among techniques(P>0.05, ANOVA test). In clinical view, shaping percentages in step-back and conventional techniques were statistically different(P<0.01, ANOVA test). * Proximal view: radiograph taken in mesiodistal direction. * Clincal view: radiograph taken in faciolingual direction. A point : 1mm point from radiographic apex B point : center point between A and C points C point : most curved point of root canal D point : center point between C point and canal oriffice.

• The Korean Journal of Malacology
• /
• v.27 no.2
• /
• pp.149-157
• /
• 2011

Some characteristics of the formations of acrosomal vesicles during the late stage of spermatids during spermiogenesis and taxonomical charateristics of sperm morphology in male two species (Saxidomus purpurata and Meretrix petechialis) in the family Veneridae were investigated by electron microscope observations. In two species, the morphologies of the spermatozoa have the primitive type and are similar to those of other bivalves in that it contains a short midpiece with five mitochondria surrounding the centrioles. The morphologies of the sperm nuclear types of S. purpurata and M. petechialis in Veneridae have the curved cylindrical and cylinderical type, respectively. And the acrosome shapes of two species are the same cap-shape type. In particular, the axial filament is not found in the lumen of the acrosome of two species, however, subacrosomal material are observed in the subacrosomal spaces between the anterior nuclear fossa and the acrosomal vesicle of two species. The spermatozoon of S. purpurata is approximately 46-$52{\mu}m$ in length, including a curved sperm nucleus (about $3.75{\mu}m$ in length), a long acrosome (about $0.40{\mu}m$ in length),and a tail flagellum (about 45-$47{\mu}m$ long). And the spermatozoon of M. petechialis is approximately 47-$50{\mu}m$ in length including a slightly curved sperm nucleus (about $1.50{\mu}m$ in length), an acrosome (about $0.56{\mu}m$ in length) and tail flagellum (44-$48{\mu}m$ in length). In two species, the axoneme of the sperm tail flagellum of each species consists of nine pairs of microtubules at the periphery and a pair of cental doublets at the center. Therefore, the axoneme of the sperm tail flagellum shows a 9 + 2 structure. In particular, taxonomically important some charateristics of sperm morphologies of two species in the family Veneridae are acrosomal morphology of the sperm, The axial filament is not found in the acrosome as seen in a few species of the family Veneridae in the subclass Heterodonta. The acrosomal vesicle is composed of right, left basal rings and the apex part of the acrosomal vesicle. In particular, right and left basal rings show electron opaque part (region), while the apex part of the acrosomal vesicle shows electron lucent part (region). These charateristics belong to the subclass Heterodonta, unlikely a characteristic of the subclass Pteriomorphia showing all part of the acrosome being composed of electron opaque part (region). Therefore, it is easy to distinguish the families or the subclasses by the acrosomal structures. The number of mitochondria in the midpiece of the sperm of S. purpurata and M. petechialis in Veneridae are five. However, the number of mitochondria in the midpiece of the sperm in most species of Veneridae in the subclass Heterodonta are four. Therefore, the number of mitochondria of the sperm midpiece of two species are exceptionally 5, and it is only exceptional case in the species in Veneridae in the subclass Heterodonta. Except these cases, the number of mitochondria in the sperm midpiece in all families in the subclass Heterodontaare are 4, and now widely used in taxonomic analyses.

• Korean Journal of Plant Taxonomy
• /
• v.32 no.3
• /
• pp.257-292
• /
• 2002

Morphological characters of sections Foetidae(one taxon), Arenariae(one taxon) and Multiflorae(six taxa) of genus Carex(Cyperaceae) were reexamined. The epidermal patterns of perigynium, achene and leaf were investigated using by a scanning electron microscope(SEM) and a light microscope(LM). Morphological characters, such as length and width of stem, leaf, leaf sheath, bract, spike, scale, perigynium and beak of perigynium, length of spike peduncle, size and frequency of stomatal complex of leaf, number of bract, shape of stem transection, scale and apex of scale, beak and base of perigynuim, achene, epidermal cell and cell wall of perigynium, achene, leaf epidermal patterns(fundamental epidermal cell and cell wall, silica body, subsidiary cell), hair, papillae present/absent of perigynium, and leaf were useful for the identification of observed eight taxa. According to the current study, examined eight taxa of sections Foetidae, Arenariae and Multiflorae were distinct from each other with respect to length and width of stem, leaf, bract, perigynium, perigynium beak, length of spike peduncle, shape of bract, scale and apex of scale, perigynium, perigynium beak, hair presence/absence of perigynium and leaf. A key based on data was presented here.

• Journal of radiological science and technology
• /
• v.45 no.4
• /
• pp.299-304
• /
• 2022

This study uses the 'S-align' function to present a reference value of the X-ray tube angle for the realization of an image similar to that of the chest PA image during chest AP radiography. This study targeted dummy phantom and used a 17"×17" DR image receptor. The irradiation conditions were 110 kVp, 160 mA, 50 ms, and the distance between the central X-ray and the image receptor was set to 180 cm and 110 cm, respectively. The end of the catheter was placed at the 11th thoracic height to indicate the nasogastric tube. In the case of lung apex length measurement, the mean value of measurement was 30.53±0.47 in PA. T 0°, TCA 5~25°, TCE 5~15° were 21.07±0.29, 27.60±0.21, 34.13±0.44, 39.86±0.31, 45.96±0.61 mm, 54.13±0.37 mm, 16.16±0.46 mm, 9.81±0.35 mm, 2.75±0.30 mm, respectively. For the depth of the catheter end, the average value measured at PA was 6.70±0.31 mm. T 0°, TCA 5~25°, TCE 5~15° were 15.72±0.38 mm, 24.10±0.50 mm, 29.24±0.86 mm, 34.35±0.35 mm, 41.06±1.08 mm, 48.07±0.38 mm, 12.85±0.25 mm, 7.92±0.36 mm, 3.01±0.39 mm, respectively. The length of the lung apex was similar to that of chest PA when the angle of incidence was adjusted from 5° to 10° in the leg direction, and the depth of the catheter tip was most similar when the X-ray tube angle was incident at 10° in the head direction. Therefore, To change the X-ray tube angle according to the purpose of the examination during the chest AP radiography using 'S-align' function is considered necessary.

• Mycobiology
• /
• v.31 no.2
• /
• pp.74-80
• /
• 2003

Isolates of Trichoderma spp. collected from Pleurotus ostreatus and P. eryngii beds, which included loosened substrate compactness and development of green colour, were grouped into three species. The occurrence of different species of Trichoderma was as T. cf. virens(70.8%), T. longibrachiatum(16.7%) and T. harzianum(12.5%). The conidia of Trichoderma spp. were ellipsoidal, obovoid and phialides were bowling pins, lageniform and the length of phialides was $3.5{\sim}10.0{\times}1.3{\sim}3.3{\mu}m$. Phialides of T. cf. virens and T. harzianum were tending clustered, but it was solitary disposition in T. longibrachiatum. T. cf. virens was characterized by predominantly effuse conidiation, sparingly branched, and fertile to the apex and it was penicillate type. RAPD analysis could detect variability amongst three different species of Trichoderma using two newly designed URP-primers. However, intra-specific variation could not be detected in all the isolates except for rDNA sequence data classified Trichoderma isolates into three distinct groups representing three species. The profiles of rDNA sequences of isolates representing a species showed high similarity in T. cf. virens and T. harzianum. However, there was a variation in rDNA sequences of isolates representing T. longibrachiatum. The results of present study reveals that molecular techniques of RAPD and rDNA sequencing can greatly aid in classification based on morphology and precise identification of fast evolving species of Trichoderma.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.377-392
• /
• 1991

The aim of this study was to investigate the thickness of alveolar lamina dura and alveolar bone height by the change of periodontal status. The periapical radiograms of the 853 cases were taken by paralleling technique. The conclusions from this study were as follows: 1. In the normal periodontal status, the alveolar lamina dura was the thickest at alveolar crest, followed by apex, midroot, and the average thickness of the posterior teeth was thicker than that of the anterior teeth. 2. In Russel's Periodontal Index 0 and 1, no significant differences of thickness were found to be 3 areas. In Russel's Periodontal Index 2 and 6, the thickness of alveolar lamina dura at alveolar crest was decreased, only. 3. In Russel's Periodontal Index 0 and 1, distance from the cemento-enamel junction to the alveolar crest was within 1.5㎜. In Russel's Periodontal Index 2 and 6, the distance was 3. increased over 1.5㎜.

• ALGAE
• /
• v.18 no.2
• /
• pp.107-119
• /
• 2003

Neosiphonia is separated from the traditionally well known genus Polysiphonia (Rhodomelaceae, Rhodophyta) and 12 species includes in Korea. In this study, the vegetative and reproductive developments of two Neosiphonia species, N. decumbens (Segi) M.S. Kim et I.K. Lee and N. harlandii (Harvey) M.S. Kim et I.K. Lee, are reinvestigated. N. decumbens is diagnosed by following combination of the characters: plants 1-3 cm high, dwarf, decumbent, main axes indistinct, irregularly branched in dichotomous manner, and alternately or secundly ramified with wide angles above. N. harlandii is distinguished by the features: plants 4-8 cm high, usually solitary and saxicolous, erect, densely corticated at base of distinct main axes, rather irregularly alternate in branch, and with cicatrigenous branchlets developed numerously on every part of frond. The two species share typical characteristics of the genus Neosiphonia, such as a base attached by unicellular rhizoids, cut off by cross wall, pericentral cells in 4, trichoblasts moderately developed near the apex of branches, leaving persistent scar-cells, tetrasporangia arranged in a spiral series, procarps with 3-celled carpogonial branch, and spermatangial branches arising as a primary branch of trichoblast. Taxonomy of the two Neosiphonia in regard to Polysiphonia is discussed.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.647-654
• /
• 2015

A prostrate species of Codium (Bryopsidales, Chlorophyta) was collected from Daejin on the eastern coast of Korea. This alga is morphologically characterized by a prostrate, adherent or pulvinate, dark green thallus that is tightly attached to substratum. The utricles are strongly grouped and cylindrical to slightly clavate. Their apex is rounded to capitated, and it frequently has an alveolate ornament. Hair scars are found in the upper portion of the utricle. The gametangia grow on a short pedicel in the upper part of the utricle. In the phylogenetic tree based on molecular data, this alga is placed in the same clade as C. mozambiquense in UPGMA analysis, and nests in a sister clade of C. lucasii subsp. capense and C. mozambiquense in ML and NJ analyses. However, the genetic distance between the sequences of the Korean alga and the two species is 1.3-1.9%, while that between the Korean alga and C. lucasii from Japan is 1.1% within intraspecific range. The divergence value between the Korean alga and C. lucasii from the type locality (Australia) is 2.7% considered to be interspecific range. As based on this genetic divergence value, the Korean alga together with Japanese C. lucasii can be separated from genuine C. lucasii from the type locality. However, the Korean alga is identified as C. lucasii until those entities are morphologically characterized in species level. This is the first record of C. lucasii in Korea

• Imaging Science in Dentistry
• /
• v.44 no.3
• /
• pp.185-191
• /
• 2014

Purpose: This study investigated the developmental stages of third molars in relation to chronological age and compared third molar development according to location and gender. Materials and Methods: A retrospective analysis of panoramic radiographs of 2490 patients aged between 6 and 24 years was conducted, and the developmental stages of the third molars were evaluated using the modified Demirjian's classification. The mean age, standard deviation, minimal and maximal age, and percentile distributions were recorded for each stage of development. A Mann-Whitney U test was performed to test the developmental differences in the third molars between the maxillary and mandibular arches and between genders. A linear regression analysis was used for assessing the correlation between the third molar development and chronological age. Results: The developmental stages of the third molars were more advanced in the maxillary arch than the mandibular arch. Males reached the developmental stages earlier than females. The average age of the initial mineralization of the third molars was 8.57 years, and the average age at apex closure was 21.96 years. The mean age of crown completion was 14.52 and 15.04 years for the maxillary and the mandibular third molars, respectively. Conclusion: The developmental stages of the third molars clearly showed a strong correlation with age. The third molars developed earlier in the upper arch than the lower arch; further, they developed earlier in males than in females.