• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.357-365
• /
• 2009

RTLS(Real-Time location system) for Location tracking of personnel and equipment of a construction site is now in development, among these techniques the wireless LAN-based techniques are being considered. To introduce these techniques to the construction site, the 3-dimensional visibility analysis prior to the installation location of AP must be simulated. At this time, three-dimensional visibility analysis considering the propagation distance of RTLS signal of AP(Access Point) should be performed. In this research, two processing methods LOS boundary are tested to various grid size of gridded terrestrial LiDAR data, and the results were compared. In evaluations of visible area, the Scanline Fill-Method shows approximately 7.4% more visible area than the Shadow Clipping-Method, but the Shadow Clipping-Method shows stable results for the grid size. About the processing time, the Scanline Fill-Method is about 2 times faster compared to the Shadow Clipping-Method.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.158-164
• /
• 2016

Spherical DADNE/AP (1,1-diamino-2,2-dinitroethylen/ammonium perchlorate) energetic composites were produced by drowning-out/agglomeration (D/A). The agglomeration of DADNE with AP particles was found to be affected by the amount of the bridging liquid, stirring velocity and residence time. The composites appeared to grow dramatically with the amount of bridging liquid which triggers agglomeration. As the stirring velocity and the residence time increased, the size of composites increased and then tended to decrease. Thermal gravimetric analysis showed that the addition of DADNE activates the low temperature decomposition (LTD) of AP. For the neat AP, the only about 30 wt% of AP was found to decompose at the LTD. On the other hand, it was found that 70 wt% of AP decomposed when DADNE was added by physical mixing and 90 wt% of AP decomposed when the DADNE/AP composites were prepared by the D/A method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1442-1449
• /
• 2011

In this article, we propose a new method for precise WLAN (Wireless Area Network) AP (Access Point) localization using GPS information measured in the smart phone. The idea is that the possible area of WLAN AP location, called AP_Area, is first determined by measuring GPS information and the received signal strength in the smart phones. As the number of measurements from the smart phones increases, the AP_Area are successively narrowed down to the actual AP location. We have performed the simulation to evaluate the proposed algorithm. The simulation results show that the proposed algorithm can detect the Wi-Fi AP localization within 5 m (probability over than 90%).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.145-149
• /
• 1997

STEP AP224 includes the information of machining feature and tolerances. Machining features are machined from raw material. Tolerance constrain feasible methods of manufacture, strongly influence the cost of manufacture. And tolerances influence the machining process. We need to decide the precedence between features .tool radius and tool direction for minimum tool changes. This paper deals with the method of decision of precedence between features and process parameters using feature information and tolerances in STEP AP224.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1303-1310
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point (AP) when they are running in low power mode. Stations stay awake for enough time to receive beacon because it is delayed in AP if the wireless channel has been being used by other traffic at each scheduled instant. In this paper, we propose a method that measures the delay of received beacons and calculates wake-up interval of station to receive the next one. Beacon transmission delay at the AP is analyzed. The proposed method is simulated and its characteristics are described in the analysis. The result measured in terms of station's wake-up interval shows some enhancement in energy consumption.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.59-61
• /
• 2022

Among indoor positioning system techniques using wireless APs, fingerprint techniques collect Mac information and reception strength of APs before performing positioning, build a radio map, and compare it with AP information collected during positioning. However, the existing Radio Map construction method has a problem in that signal interference occurs due to collisions of numerous APs depending on the indoor environment, and the signal strength search result is not always constant. Therefore, this paper compares the existing fixed radio map construction method and the variable radio map construction technique that actively analyzes and constructs the measurement area itself according to signal strength.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.209-216
• /
• 2005

This paper generally relates to the field of wireless local area networks(WLANs), and more particularly, to AP selection and association methods for the performance of a station. In these days, IEEE 802.11 Wireless LAN network is widely deployed and used as an emerging service to connect high-speed Internet in the public wireless environment. But, if there are many users in hot spot area, they suffer a severe decrease of performance. Thus it needs an association and access control mechanism especially when it is used in the public environment. In this paper, we suggest a selection and association method using Beacon or Probe Response frames based IEEE 802.11. Station selects AP using the information of the capacity area in a Beacon or a Probe Response frame. According to the present paper, an association method for a public WLAN service, which includes a WLAN user terminal and an AP for relaying WLAN communications to and from the user terminal, includes the steps of the user terminal asking the AP's states for access to a radio channel; and the station selects and associates with the AP According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.

• Journal of Internet Computing and Services
• /
• v.18 no.2
• /
• pp.1-11
• /
• 2017

There are two kinds of wireless network access to a certain place by using smart devices - 1) open (anonymous) - access and 2) user-authorized access. The open-access is a non-authorization connection method which does not need to require Smart device's user authorized information. It means open-access use only user's SSID (Service Set Identifier) information to access the wireless AP devices following public wireless network standard. This access mechanism is not suitable to use all of public wireless networks because users have to get all wireless network information around them. As a result, huge data for smart devices should be one of the most critical overload problems for them. Secondly, the user-authorized access method uses wireless network information (SSID and password) chosen by the users. So, the users have to remember and use the network access information data manually whenever accessing the network. Like open-access, this access method also has the operational and inconvenient problem for the users - manually inputting access information whenever connecting to the network. To overcome this problem in both schemes, we propose two improved wireless network access methods: 1) the implementation of automatic AP connection mechanism using user-authorization and iBeacon messages, and 2) SSID registration form for public wireless networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.585-587
• /
• 2022

The visual motivation between AP devices is NTP-based visual motivation through the access of the Internet through the internal wired LAN, but this has several seconds of visual difference in hundreds of milliseconds (msec) depending on the network. The frame for the output of the video will vary depending on the application, but usually 24 (image) frames are output to the screen in one second. Therefore, the visual synchronization between peripheral devices can be performed through the adjacent moving camera device, not the wired method. The programming method of generating API for synchronization command when creating an application for visual synchronization and delivering it to AP through MAC may differ from the time in synchronization command according to the environment of the operating system at the transmission side and the situation of the buffer queue of the MAC. Therefore, as a method to solve this problem, the renewal of visual information in the device driver terminal controlling MAC can be much more effective.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2411-2418
• /
• 2011

The most typically utilized positioning method in the existing indoor WPS that is a positioning method utilizing distributed wireless network is the finger print. Its positioning is carried out by calculating the difference between the AP information map and WiFi AP signal collected. However, there are problems like low accuracy and high cost when the existing method and the radio map formation are applied to outdoors. In this paper, the characteristics of the existing WPS are surveyed and their problems are examined. In addition, we propose a new WPS using weak signal and a method to construct radio map in order to solve the above problems. And then, the results of experimental test will be analyzed.