• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.202-208
• /
• 2006

The purpose of this research is to model numerically the turbulent gas-particle flows in a rectangular chamber using Eulerian-Eulerian Method. A computer code using the ${\kappa}-{\varepsilon}-Ap$ two-phase turbulence model is developed for the numerical study. This code and the Eulerian multiphase model in FLUENT were used for the numerical simulations of the two-phase flow in a rectangular chamber. The numerical results calculated by the two different turbulent gas-particle codes have shown that the ${\kappa}-{\varepsilon}-Ap$ model results in a stronger diffusion of the flow momentum in the gas-particle turbulence interaction than the Eulerian multiphase model in FLUENT.

• Structural Engineering and Mechanics
• /
• v.59 no.1
• /
• pp.59-82
• /
• 2016

Simplifier assumptions which are used in numerical studies of progressive collapse phenomenon in structures indicate inconsistency between the numerical and experimental full-scale results. Neglecting the effects of infill panels and two-dimensional simulation are some of these assumptions. In this study, an existing seismically code-designed steel building is analyzed with alternate path method (AP) to assess its resistance against progressive collapse. In the AP method, the critical columns be removed immediately and stability of the remaining structure is investigated. Analytical macro-model based on the equivalent strut approach is used to simulate the effective infill panels. The 3-dimentional nonlinear dynamic analysis results show that modeling the slabs and infill panels can increase catenary actions and stability of the structure to resist progressive collapse even if more than one column removed. Finally, a formula is proposed to determine potential of collapse of the structure based on the quantity and quality of the produced plastic hinges in the connections.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.42-47
• /
• 2016

To examine the natural regeneration in the natural mixed-broadleaved forest, flowering, fruiting, seed-fall, and seed viabilities of Acer pseudosieboldianum (Ap) were investigated in Mt. Jungwang, Gangwon-do, from 2009 to 2015. The flower of Ap consisted many male and bisexual flowers on the corymb. Flowering dates are differed between sex morph in the same inflorescence. Stamens are stop growing and disappeared after pollinated pistil begin to grow in bisexual flowers, and male flowers have vestial pistil. The flowers of Ap might be pollinated by Apis mellifera, Andrenidae spp. and Syrphinae spp. Ap had some mechanism to prevent from self pollination with heterodichogamy. Mean annual seedfall of Ap was 70,780 ea/ha (ranged 310~234,840 ea/ha). Annual seedfall of Ap varied severely, and the maximum was about 760 times the minimum. Annual seed production of Ap might be to a normal distribution. Rates of damaged or decayed seeds are highest 59.3%, and those of sound seeds are 23.9%, Those of undeveloped and empty seeds are 9.2% and 7.6%, respectively. The most important factors influencing sound seed production might be the density and activities of insect pollinators and sucking pest in the flowerwing period, middle-late May. Successful regeneration of Ap might be in masting year and on the gap sites with proper conditions to germinate and grow. To understand the natural regeneration of deciduous hardwoods, further study on the characteristics of flowering and fruiting, pre- and post-dispersal seed predation, and annual variation on these factor should be needed.

• Journal of Broadcast Engineering
• /
• v.27 no.3
• /
• pp.273-282
• /
• 2022

MPEG-VCM(Video Coding for Machine) aims to standardize video codec for machines. VCM provides data sets and anchors, which provide reference data for comparison, for several machine vision tasks including object detection, object segmentation, and object tracking. The evaluation template can be used to compare compression and machine vision task performance between anchor data and various proposed video codecs. However, performance comparison is carried out separately for each machine vision task, and information related to performance evaluation of multiple machine vision tasks on a single bitstream is not provided currently. In this paper, we propose a performance evaluation method of a video codec for AI-based multi-tasks. Based on bits per pixel (BPP), which is the measure of a single bitstream size, and mean average precision(mAP), which is the accuracy measure of each task, we define three criteria for multi-task performance evaluation such as arithmetic average, weighted average, and harmonic average, and to calculate the multi-tasks performance results based on the mAP values. In addition, as the dynamic range of mAP may very different from task to task, performance results for multi-tasks are calculated and evaluated based on the normalized mAP in order to prevent a problem that would be happened because of the dynamic range.

• Composites Research
• /
• v.28 no.1
• /
• pp.6-14
• /
• 2015

Polymerization shrinkage stress analysis of dimethacrylate-based composite (Clearfil AP-X, Kuraray) and silorane-based composite (Filtek P90, 3M ESPE) used for dental composite restorations was performed using strain-gage measurement and FEM analysis. A theoretical equation based on Young's modulus and polymerization shrinkage of the composite resin was proposed to predict the polymerization shrinkage stress. Experimental results showed that the maximum shrinkage stress of Clearfil AP-X was about 2.8 times higher than Filtek P90. FEM analysis agreed with such experimental stress behaviours and showed that the maximum Von-Mises stress appeared near the margin of the filled resin adhered with PMMA ring. The stress concentration at the interface on the specimen surface was higher than that in the interior. The maximum error of shrinkage stress by the theoretical equation was reasonable within 5% in comparison to FEM results under plane stress.

• The Journal of Internal Korean Medicine
• /
• v.25 no.2
• /
• pp.167-173
• /
• 2004

Objective : The purpose of this study is to evaluate the clinical effect of the non-pharmacological anti-hypertension method, acupuncture, for hypertensive patients. Methods : 26 patients diagnosed with hypertension were each treated by one of three methods: an anti-hypertension drug(adalat soft capsule), venepuncture, and acupuncture. In cases of rising blood pressure, patients were treated by their one of the three methods, and blood pressure was measured at regular intervals. Result : As for the group of acupuncture treated patients on Young-gol(ling-gu) and Gang-ap-hyul(jiang-ya-xue), readings dropped 18.0mmHg in systolic blood pressure and 6.50mmHg in diastolic blood pressure. This was a greater effect than that seen in the venepuncture treated patients. Blood pressure checked one hour after acupuncture treatment showed a greater difference than blood pressure checked after thirty minutes. Conclusion : Safe reductions in blood pressure were observed through the non-pharmacological method of acupuncture on Young-gol(ling-gu) and Gang-ap-hyul(Jiang-ya-xue).

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.1
• /
• pp.94-98
• /
• 2005

Purpose: To compare the radiographic evaluations between two radiographic views (AP and lateral views) and four radiographic views (AP, lateral and both oblique views) in ankle fractures. Materials and Methods: From January 2000 to June 2002, 60 cases of ankle fractures were treated with open reduction and internal fixation and its followed up periods were at least 2 years. All cases were classified into three groups according to the method of preoperative radiographic evaluation. Two radiographic views (AP and lateral views) were taken in group A and four radiographic views (AP, lateral and both oblique views) were taken in group B. 12 Cases were evaluated with three dimensional computed tomography (3D CT). Four radiographic views and 3D CT were taken in group C. All cases were classified according to the Danis-Weber and Lauge-Hansen classification. Displacement of fracture fragment of medial, lateral, posterior malleolus and size of fracture fragment of posterior malleous were measured using picture archiving communication system (PACS). Results: Although kappa value between two or four radiographic views were good or excellent in Danis-Weber classification and Lauge-Hansen classification of ankle fractures, the displacements of medial and lateral malleoli were statistically different. Four radiographic views evalulated the degree of displacement of medial and lateral fragments more accurately compared to two radiographic views. Conclusion: Four radiographic views will be more useful than two radiographic views to decide the method of treatment and operation considering the displacement of fracture fragment.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.90-100
• /
• 1986

Along with synthesizing a model oligodeoxyribonuclotide GpApApTpTpCp which had the EcoRI recognition site according to "Phosphotriester Method", reported methods for protecting functions, condensation, deprotection, purifying products, quantification and identification were evaluated and modified. It was realized that oligomers were efficiently synthesized by elongating by dimer unit per step of the condensation and the condensation yields were decreased with increased numbers of the residues. The problems of quantification/identification involved in the oligonucleotide synthesis using small amount of the reactants were solved by employing UV/IR spectrophotometry and hplc/tlc. It was also proved that a nucleotide having the exposed 5'-OH function was well synthesized by condensing a 5'-OH nucleotide and a phosphodiester nucleotide whose molar ratio was intendedly made to be 1 : 1.2 and then detritylating followed by washing with an aqueous solution of sodium bicarbonate. Spectrophotometric and chromatographic data of the nucleotides and their derivatives concerned in this synthetic work were prepared.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.39-45
• /
• 2013

Basically, in order to apply solid propellant as ignition source to high energy metal particle combustion system, we analyzed combustion characteristics of the HTPB/AP/Al, HTPE/AP/Al propellants by using a strand burner. The propellants were tested in a high-pressure windowed strand burner, which was pressurized up to 300 psia with pure argon gas. Strand burner was visualized with two quartz windows and ignition was accomplished by a 10 W $CO_2$ laser. The burning rate of propellant was measured with high-speed camera method for frame analysis and photodiode method for combustion time analysis. Emission spectrum was measured with spectrometer at 300 nm ~ 800 nm and 1500 nm ~ 5000 nm and then we analyzed species during propellant combustion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1330-1339
• /
• 2022

3D object detection generally aims to detect relatively large data such as automobiles, buses, persons, furniture, etc, so it is vulnerable to small object detection. In addition, in an environment with limited resources such as embedded devices, it is difficult to apply the model because of the huge amount of computation. In this paper, the accuracy of small object detection was improved by focusing on local features using only one layer, and the inference speed was improved through the proposed knowledge distillation method from large pre-trained network to small network and adaptive quantization method according to the parameter size. The proposed model was evaluated using SUN RGB-D Val and self-made apple tree data set. Finally, it achieved the accuracy performance of 62.04% at mAP@0.25 and 47.1% at mAP@0.5, and the inference speed was 120.5 scenes per sec, showing a fast real-time processing speed.