• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.207-210
• /
• 2007

A part of the big differences between LEO(Low Earth Orbit) and GEO(Geostationary Earth Orbit) satellite is that transfer orbit is used or not or what tolerance of the position on the mission orbit is permitted. That is to say, the transfer orbit is not used and the constraint of orbit position is not adapted on LEO satellite. Whereas for GEO satellite case, the transfer orbit shall be used due to the very high altitude and the satellite shall be stayed in the station keeping box which is permitted on the mission orbit. These phases are functions for AOCS mission. The aim of this paper is to introduce the AOCS hardware configuration for COMS (Communication, Ocean and Meteorological Satellite). The AOCS hardware of COMS consist of 3 Linear Analogue Sun Sensors (LIASS), 3 Bi-Axis Sun Sensors (BASS), 2 Infra-Red Earth Sensors (IRES), 3 Fiber Optical Gyroscopes (FOG), 5 momentum wheels and 14 thrusters. In this paper, each component is explained how to be used, how to locate and what relation between the AOCS algorithm and these components.

• 한국연초학회지
• /
• 제32권2호
• /
• pp.88-94
• /
• 2010

The ether extract(EE) of leaf tobacco contains diverse compounds such as lipid, resinoid, paraffin hydrocarbons and pigments. Although the correlation of EE concentertion with leaf tobacco has not been established clearly, it is known that in some concentration range, EE concentration of leaf tobacco exerts good influence on the quality of tobacco. Recently, The American Oil Chemist's Society introduced new method(Am 5-04; AOCS, 2009) to determine EE concentration by AT15 extractor. This method is based on extraction with organic solvent at relatively high temperature and pressure, which significantly reduces the extraction time and ensures safety. The aim of this study is to optimize analytical condition of AOCS method for analyzing EE concentration of leaf tobacco. When sample pre-drying time and extraction time of XT15 were set to 3 hour and 30 minute and 30 minute respectively, EE concentration obtained from AOAC method. Statistical analysis(T-test) showed that there is no difference(P>0.05) between EE concentrations from two methods.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.183-186
• /
• 2007

The aim of this analysis is to verify the electrical compatibility of the interfaces which exist between COMS(Communication, Ocean and Meteorological Satellite) AOCS(Attitude Orbit Control Subsystem) equipments and external equipments. For each interface, this study checked the compatibility between equipments for the power links, commands, digital telemetry, analog telemetry and failure condition. In addition with this interface compatibility verification, this study outputs the electrical and manufacturing constraints to be applied at harness level.

• International Journal of Aeronautical and Space Sciences
• /
• 제6권1호
• /
• pp.77-88
• /
• 2005

KOMPSAT-2 is the second Korean earth observation satellite after KOMPSAT-l: the 1 meter GSD cartographic capability and planning to launch at the end of 2005 by ROKOT launch vehicle. The dedicated AOCS operational modes are designed for KOMPSAT-2 based on KOMPSAT-l experience All of AOCS operational modes requires gyro information. To compensate this drawback, Power Safe Mode is designed and implemented. Successfully AOCS on-board software is developed and extensively verified through a nonlinear simulation process. The simulation results of Power Safe Mode and Science Fine Submode are provided to demonstrate its functionality as well as its performance.

• 항공우주기술
• /
• 제1권1호
• /
• pp.65-71
• /
• 2002

다목적 실용위성의 자세제어계 mode는 크게 Sun, Maneuver, Science Mode로 나누어진다. 이중 Manuever Mode는 다시 Attitude Hold submode 와 Δ-V Burn submode로 나누어진다. 본 논문은 지상으로 송신된 playback 데이터를 이용하여 자세제어계 Maneuver Mode의 동작상태를 주로 분석하였다. Maneuver Mode중 attitude hold submode에서의 nadir pointing performance, 그리고 Δ-V Burn submode에서의 pitch/ roll 90도 maneuver 후 추력기 점화 과정에 대한 성능 분석을 수행하였으며 자세제어계 서브시스템 설계 규격을 만족함을 검증하였다.

• Environmental Engineering Research
• /
• 제14권3호
• /
• pp.164-169
• /
• 2009

A powder form of aluminum (hydr)oxides is not suitable in wastewater treatment/filtration systems because of low hydraulic conductivity and large sludge production. In this study, aluminum (hydr)oxide-coated sand (AOCS) was used to remove phosphate from aqueous solution. The properties of AOCS were analyzed using a scanning electron microscopy (SEM) combined with an energy dispersive X-ray spectrometer (EDS) and an X-ray diffractometer (XRD). Kinetic batch, equilibrium batch, and closed-loop column experiments were performed to examine the adsorption of phosphate to AOCS. The XRD pattern indicated that the powder form of aluminum (hydr)oxides coated on AOCS was similar to a low crystalline boehmite. Kinetic batch experiments demonstrated that P adsorption to AOCS reached equilibrium after 24 h of reaction time. The kinetic sorption data were described well by the pseudo second-order kinetic sorption model, which determined the amount of P adsorbed at equilibrium ($q_e$ = 0.118 mg/g) and the pseudo second-order velocity constant (k = 0.0036 g/mg/h) at initial P concentration of 25 mg/L. The equilibrium batch data were fitted well to the Freundlich isotherm model, which quantified the distribution coefficient ($K_F$ = 0.083 L/g), and the Freundlich constant (1/n = 0.339). The closed-loop column experiments showed that the phosphate removal percent decreased from 89.1 to 41.9% with increasing initial pH from 4.82 to 9.53. The adsorption capacity determined from the closed-loop experiment was 0.239 mg/g at initial pH 7.0, which is about two times greater than that ($q_e$ = 0.118 mg/g) from the kinetic batch experiment at the same condition.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.290-293
• /
• 2006

COMS (Communication, Ocean and Meteorological Satellite) shall be operated with two remote sensing payloads, MI (Meteorological Imager) and GOCI (Geostationary Ocean Color Imager). Since both payloads have rotating mechanisms, the dynamic coupling between two payloads is very important considering the pointing stability during GOCI operation. In addition, COMS adopts a single solar wing to improve the image quality, which leads to the unbalanced solar pressure torque in COMS. As a result, the off-loading of the wheel momentum needs to be performed regularly (2 times per day). Since the frequent off-loading could affect MI/GOCI imaging performance, another suboptimal off-loading time needs to be considered to meet the AOCS design requirements of COMS while having margin enough in the number of thruster actuations. In this paper, preliminary analysis results on the pointing stability and the wheel off-loading time selection with respect to MI/GOCI operations are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.155-157
• /
• 2005

The Electrical Test Bed(ETB) integrates the test environment, required for acceptance tests of system level, prior to FM testing. The ETB will be used for the validation of system-level functions and interface between each subsystem. The FTB supports early functional and limited performance checkout of electrical subsystems. Therefore, it provides the environment for the verification of the Flight Software including AOCS, EPS, and TC&R simulators. These ETB will be composed of engineering version of spacecraft BUS, which are laid on the laboratory table.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.64-70
• /
• 2003

A measurement of spacecraft alignment is an important process of spacecraft assembly, integration and test because it is necessary that a ground station controls the precise positions of on-orbit spacecraft by using the alignment data of attitude orbit control sensors(AOCS) on spacecraft. In addition, accuracy of spacecraft alignment requirement is about $0.1^{\circ}$~$0.7^{\circ}$. The spacecraft alignment is measured by autocollimation of theodolite. This paper describes the measurement principle and method of spacecraft alignment. The result shows that all of the AOCS on the spacecraft are aligned within the tolerance required through the alignment measurement.

• Environmental Engineering Research
• /
• 제16권4호
• /
• pp.219-225
• /
• 2011

The objective of this study was to investigate the bacterial adhesion to iron (hydr)oxide-coated sand (IHCS) and aluminum oxidecoated sand (AOCS) in the presence of Tween 20 (nonionic surfactant) and lipopeptide biosurfactant (anionic surfactant) through column experiments. Results show that in the presence of Tween 20, bacterial adhesion to the coated sands was slightly decreased compared to the condition of deionized water; the mass recovery (Mr) increased from 0.491 to 0.550 in IHCS and from 0.279 to 0.380 in AOCS. The bacterial adhesion to the coated sands was greatly reduced in lipopeptide biosurfactant; Mr increased to 0.980 in IHCS and to 0.797 in AOCS. Results indicate that the impact of lipopeptide biosurfactant on bacterial adhesion to metal oxide-coated sands was significantly greater than that of Tween 20. Our results differed from those of the previous report, showing that Tween 20 was the most effective while the biosurfactant was the least effective in the reduction of bacterial adhesion to porous media. This discrepancy could be ascribed to the different surface charges of porous media used in the experiments. This study indicates that lipopeptide biosurfactant can play an important role in enhancing the bacterial transport in geochemically heterogeneous porous media.