• 전산구조공학
• /
• 제22권6호
• /
• pp.87-91
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.281-282
• /
• 2013

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.259-262
• /
• 2000

In this study, 3.1$\times$3.7$\times$0.365 $\textrm{mm}^2$ model of thickness-longitudinal vibration mode VHF ceramic resonator with (Pb,Ca)(Co,W,Ti)O$_3$ ceramics was simulated by ANSYS according to the electrode size. With the variations of electrode size of the model, fundamental and the third overtone dynamic ratio was investigated. At the ratio of electrode to model thickness(1/t) 2.5, third overtone dynamic ratio was largely increased. That model is suitable for 20 MHz resonator.

• Wind and Structures
• /
• 제10권1호
• /
• pp.61-82
• /
• 2007

This paper presents a novel finite element (FE) model for analyzing coupled flutter of long-span bridges using the commercial FE package ANSYS. This model utilizes a specific user-defined element Matrix27 in ANSYS to model the aeroelastic forces acting on the bridge, wherein the stiffness and damping matrices are expressed in terms of the reduced wind velocity and flutter derivatives. Making use of this FE model, damped complex eigenvalue analysis is carried out to determine the complex eigenvalues, of which the real part is the logarithm decay rate and the imaginary part is the damped vibration frequency. The condition for onset of flutter instability becomes that, at a certain wind velocity, the structural system incorporating fictitious Matrix27 elements has a complex eigenvalue with zero or near-zero real part, with the imaginary part of this eigenvalue being the flutter frequency. Case studies are provided to validate the developed procedure as well as to demonstrate the flutter analysis of cable-supported bridges using ANSYS. The proposed method enables the bridge designers and engineering practitioners to analyze flutter instability by using the commercial FE package ANSYS.

• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.180-188
• /
• 2014

현대자동차그룹은 HSM이라고 불리는 간략화된 차량 모델에 대하여 썬루프 버페팅 현상의 실험적인 조사를 시행하였다. 현대자동차그룹은 어떤 CFD솔버가 충분한 정확도를 가지고 썬루프 버페팅 현상을 예측하는지 조사하기 위해 상용CFD공급업체의 참여를 요청하였다. ANSYS Korea는 이번 조사에 참여하여 ANSYS fluent를 이용하여 HSM의 썬루프 버페팅에 대한 수치해석을 수행하였다. 먼저 유동장 검증을 위해 풍속 60 km/h에 대하여 썬루프가 닫힌 HSM모델에 대하여 해석을 수행하였다. HSM상부 면의 세 지점에서 속도 분포를 예측하였고, 이는 시험결과와 비교되었다. 그런 다음 고해상도 난류 모델인 DES를 이용한 해석이 전 풍속영역에 걸쳐 수행되었다. 버페팅 주파수와 버페팅 음압레벨이 예측되었고, 이는 시험결과와 비교되었다. 이를 통해 실제 차량 개발을 위한 CFD의 예측 가능성에 대하여 결론을 얻을 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.372-372
• /
• 2001

• 기계저널
• /
• 제54권6호
• /
• pp.46-50
• /
• 2014

이 글에서는 다물리현상 해석을 위한 ANSYS 소프트웨어에서 제공하는 해석 기법과 사례를 소개한다.

• International Journal of Concrete Structures and Materials
• /
• 제8권2호
• /
• pp.141-155
• /
• 2014

The use of fiber reinforced polymer (FRP) composites in strengthening reinforced concrete beam-column subassemblies has been scrutinised both experimentally and numerically in recent years. While a multitude of numerical models are available, and many match the experimental results reasonably well, there are not many studies that have looked at the efficiency of different finite elements in a comparative way in order to clearly identify the best practice when it comes to modelling FRP for strengthening. The present study aims at investigating this within the context of FRP retrofitted reinforced concrete beam-column subassemblies. Two programs are used side by side; ANSYS and VecTor2. Results of the finite element modeling using these two programs are compared with a recent experimental study. Different failure and yield criteria along with different element types are implemented and a useful technique, which can reduce the number of elements considerably, is successfully employed for modeling planar structures subjected to in-plane loading in ANSYS. Comparison of the results shows that there is good agreement between ANSYS and VecTor2 results in monotonic loading. However, unlike VecTor2 program, implicit version of ANSYS program is not able to properly model the cyclic behavior of the modeled subassemblies. The paper will be useful to those who wish to study FRP strengthening applications numerically as it provides an insight into the choice of the elements and the methods of modeling to achieve desired accuracy and numerical stability, a matter not so clearly explored in the past in any of the published literature.

• 한국가스학회지
• /
• 제13권4호
• /
• pp.15-21
• /
• 2009

섬유강화 복합재료는 비강성과 비강도등의 우수한 기계적 성질을 나타내므로 구조물의 경량화가 요구되는 여러 산업분야에서 널리 사용되고 있다. 이러한 복합재를 이용한 압력용기는 무게를 경량화함으로써 에너지를 절약할 수 있고 강한 내식성을 가지고 있기 때문에 장기간 사용에 유리하다. 본 연구에서는 유한요소법과 ANSYS 반응표면법을 이용하여 안정성 판단의 기준으로 Von-mises 항복 기준, Tasi-hill이론, 응력비를 만족시킬 수 있는 E-glass/epoxy로 필라멘트 와인딩된 CNG차량복합재 압력용기 적층판의 최적설계 모듈을 개발하였다.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.645-652
• /
• 2000

A method for shape design sensitivity analysis is proposed utilizing commercial software ANSYS for thermal conduction problems. While the sensitivity formula is derived analytically by introduing adjoint variable concept, sensitivity calculation in practice as well as the primal and adjoint solution of thermal conduction is performed using the ANSYS very easily. Since the formula always takes boundary integral form, sensitivity evaluation in ANSYS requires a little more addition of post-processing routine which involves evaluation of boundary variable from the obtained solution. Though the BEM has been used as a better tool for this purpose, the present study shows it can also be calculated using any kind of analysis code such as ANSYS since the formula is based on analytic nature. Therefore the present study provides a new and efficient way of optimization which was not possible before using commercial software. The usefulness of the method is illustrated via a weight minimization problem of thermal diffuser.