• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.463-470
• /
• 2022

The purpose of this study was to investigate the perception of Air Force human resources (Civilian defense manpower, Officer, Noncommissioned officer, Solder) for the radiation perception. The subjects were 259 men and women who visited at the Aerospace Medical Center. As for the method, a survey study was conducted using a questionnaire with a total of 14 questions about radiation perception (risk, benefit, management). For statistical analysis, an independent sample T-test and one-way analysis of variance (ANOVA) were used to compare the average of confirm a significant difference among groups. The correlations between variables were tested with Pearson and Spearman correlation coefficients. As a result, in the air force human resources, perception of radiation risk of females had a significantly higher awareness than male. Radiation benefits had a significantly higher awareness among married people, military officers, officers, and non-commissioned officers. Radiation control was significantly higher in men, married men, and those with more than 16 years of military experience.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.28-33
• /
• 2014

In this paper, I-butt welding with 6mm thickness using Plasma-GMA welding was carried out. And weld characteristics of the Al-5083 aluminium alloy for Plasma-GMA hybrid welding was evaluated. The orthogonal experimental design was used to investigate the influence of plasma-MIG welding parameters such as plasma current, wire feeding rate, MIG-welding voltage and welding speed on the weld bead geometry and tensile strength using the ANOVA(Analysis of Variation). Then we conducted evaluation of contribution for process parameters. ANOVA results show that bead dimensions are affected by wire feeding speed, welding voltage and welding speed and tensile strength is mainly affected by welding speed and plasma arc current. Tensile strength was decreased by rise in plasma welding current because GMA welding current was decreased by plasma arc.

• Architectural research
• /
• v.14 no.3
• /
• pp.93-98
• /
• 2012

The objective of the study is to analyze the relative performance of factors affecting indoor air quality in multi-residential buildings in Korea. A study of the factors affecting indoor air quality is essential for establishing indoor air quality management strategies effectively. To observe the indoor air quality response following a modification of a given parameter, a sensitivity analysis was performed. The factors examined for the analysis include; wall/ceiling paper, adhesive for wall/ceiling paper, floor material, adhesive for floor material, and ventilation rate. The Experimental Design which identifies main effects among the design parameters with a few experiments was used to decrease the number of experiments. The simulation for indoor air quality was undertaken using a validated equation. Then, ANOVA(Analysis of Variance) was performed to evaluate the relative importance of each parameter affecting the indoor air quality. The result of the study indicates that the indoor air quality may be influenced most by adhesive for wall/ceiling paper, followed by ventilation rate and adhesive for floor material.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.127-133
• /
• 2006

The major purpose of this paper to identify safety climate practices, and to find the affecting variables that influence to the difference in the level of safety climate between plants and employees. And this paper attempted to find the interventions for improving safety climate in the chemical plants. The questionnaires were developed from literature review, especially made by HSE(Health and Safety Executive) in the UK and distributed to managers and workers. The frequency analysis was applied for identifying the level of safety climate. The affecting variables(plant size, accident occurrence, accident experience, injury experience and severity, and length of employment) are tested through analysis of variance(ANOVA). The results of frequency analysis showed that both managers and workers recorded generally high level of safety climate, and the major underlying problems are inadequate H&S procedures/rules, pressure for production, and rule breaking. According to the outcomes of ANOVA, the variable 'length of employment' is the only variable which makes the level of safety climate different. From the survey of safety climate practice, this study finds the level of safety climate and three major underlying problems in safety climate factors of the responded plants, and presents two interventions for improving safety performance. Despite of these outcomes, the applied factors are remained questionable for reflecting as the best ones for identifying safety climate in the chemical industry. In addition, the bias caused by self-report exist in the reliability of the response, and the equivalent size of respondents.

• Korean Journal of Veterinary Research
• /
• v.39 no.6
• /
• pp.1187-1196
• /
• 1999

The purpose of this study is to assess the suitability of the statistical techniques employed in papers published in the Korean Journal of Veterinary Research from March 1997 to March 1999 and it is hoped that the critical assessment may be of help to other researchers preparing their works for publication. Of the 246 original papers 94 were included in the analysis. Of 62 papers with the measure of central location and dispersion of data 34 (54.8%) used them correctly : 9 (39.1%) of 23 for t-test ; 1 (33.3%) of 3 for correlation analysis ; 7 (43.8%) of 16 for analysis of variance (ANOVA) ; 5 (62.5%) of 8 for chi-square test ; 44 (71%) of 62 for description of p-value. A number of papers employed ANOVA did not perform subsequent analysis of multiple comparison. Compared to the results of others, relatively higher proportion of papers in the present study was evaluated as appropriate analysis. The reason is that papers described insufficiently on the study design were not included, and evaluation items were restricted to the cases violated seriously inherent assumptions for each statistical technique. Statistical misuse or abuse appeared in the study is due to lack of knowledge on statistics and short of its importance for improvement the quality of paper. Because an inappropriate analysis can lead the readers to misunderstand on findings, observed statistical analyses must be valid, and correctly undertaken. It is suggested that more intensive statistical refereeing are needed, and the communication should be allowed for the controversial points.

• Laser Solutions
• /
• v.7 no.3
• /
• pp.11-24
• /
• 2004

In automotive industry, light weight vehicle is one of issues because of the air pollution and the protection of environment. Therefore, automotive manufacturers have tried to apply light materials such as aluminum to car body. Aluminum welding using laser has some advantages high energy density and high productivity. It is very important to understand behavior of plasma and keyhole in order to improve weld quality and monitor the weld state. In this study, spectral analysis was carried out to verify the spectrum for plasma which is generated in laser welding of A 6000 aluminum alloy. Two photodiodes which cover the range of plasma wavelength was used to measure light emission during laser welding according to assist gas flow rate and welding speed. Analysis of relationship between sensor signals of welding variables and formation of keyhole and plasma is performed. To determine the level of significance, analysis of variation (ANOVA) was carried out.

• Communications for Statistical Applications and Methods
• /
• v.2 no.1
• /
• pp.48-54
• /
• 1995

A direct method for fitting analysis-of-variance models to unbalanced data is presented. This method exploits sparsity and rank deficiency of the matrix and is based on Gram-Schmidt orthogonalization of a set of sparse columns of the model matrix. The computational algorithm of the sum of squares for testing estmable hyphotheses is given.

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.495-510
• /
• 2022

In this study, fluorescence hyperspectral imaging (FHSI) was used for the rapid, non-destructive detection of fake, manmade eggs from real eggs. To identify fake eggs, protoporphyrin IX (PpIX)-a natural pigment present in real eggshells-was utilized as the main indicator due to its strong fluorescence emission effect. The fluorescence images of real and fake eggs were acquired using a line-scan-based FHSI system, and their fluorescence features were analyzed based on spectroscopic techniques. To improve the detection performance and accuracy, an optimal waveband combination was investigated with analysis of variance (ANOVA), and its fluorescence ratio images (588/645 nm) were created for visualization of the real eggs between two different egg groups. In addition, real and fake eggs were scanned using a one-waveband (645 nm) handheld fluorescence imager that can perform real-time scanning for on-site applications. Then, the results of the two methods were compared with one another. The outcome clearly shows that the newly developed FHSI system and the fluorescence handheld imager were both able to distinguish real eggs from fake eggs. Consequently, FHSI showed a better performance (clearer images) compared to the fluorescence handheld imager, and the outcome provided valuable information about the feasibility of using FHSI imaging with ANOVA for the discrimination of real and fake eggs.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.5
• /
• pp.400-405
• /
• 2015

PURPOSE. The purpose of this study is to mix dental ceramic powder in varying ratios and evaluate the effect of the mixing ratio on color and translucency. MATERIALS AND METHODS. The ceramic powder of shade A3 of the same product was mixed with the shade A2 of three products: IPS e.max Ceram (Ivoclar Vivadent, Schaan, Liechtenstein), Vintage Halo (SHOFU Inc., Kyoto, Japan), and Ceramco 3 (Ceramco-Dentsply, Burlington, NJ, USA) in the following fixed ratios (0 wt%, 25 wt%, 50 wt%, 75 wt%, and 100 wt%) and then fired. A total of 150 specimen of ceramic fired were manufactured in a regular size (W: 8.5 mm, L: 10.5 mm, and H: 1.5 mm). For color and translucency, $L^*$, $a^*$, and $b^*$ were measured and Two-way analysis of variance (ANOVA) and One-way analysis of variance (ANOVA) were used for data analysis (${\alpha}$=0.05). RESULTS. The higher the mixing ratio was, $L^*$, $a^*$, and $b^*$ of IPS e.max Ceram were all increased, and $L^*$ of Vintage Halo was reduced and $a^*$ and $b^*$ were increased. $L^*$ and $a^*$ of Ceramco3 were reduced and $b^*$ of Ceramco3 was increased. Color difference (${\Delta}E^*ab$) was increased in all three products as the mixing ratio got higher. Increased mixing ratios resulted in decreased translucency parameter (TP) values for IPS e.max Ceram but increased TP values for Vintage Halo and Ceramco3. CONCLUSION. In this limited study, CIE $L^*$, $a^*$, and $b^*$ were influenced by the mixing ratio of the A3 powders and porcelain powder mixtures represented a various color and translucency.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.4
• /
• pp.368-373
• /
• 2000

In this paper, a control algorthm suitable for multi-objective control is proposed based on the orthogonal array which is normally used in statics and industrial engineering. And a newly defined Nthcertainty factor is suggested, which can effectively exclude the less confident rule. The Nth-certainty factor is defined by the F-values of the ANOVA(analysis of variance) table. It is shown that the algorithm can be successfully adopted to the design of controller for an active magnetic bearing system.