• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2013

Maintenance of adequate soil tension or content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil tension and content for precision irrigation would allow optimal soil water condition to crops and minimize the adverse effects of water stress on crop growth and development. This research reports on a comparison of soil water tension and content variations in differently textured soils over time under drip irrigation using two different water management methods, i.e. pulse time and required water irrigation methods. The pulse time-based irrigation was performed by turning the solenoid valve on and off for preset times to allow the wetting front to disperse in root zone before additional water was applied. The required water estimation method was a new water control logic designed by Rural Development Administration that applies the amount of water required based on a conversion of the measured water tension into water content. The use of the pulse time irrigation method under drip irrigation at a high tension of -20 kPa and high temperatures over $30^{\circ}C$ was not successful at maintaining moisture tensions within an appropriate range of 5 kPa because the preset irrigation times used for water control could not compensate for the change in evapotranspiration during day and night. The response time and pattern of water contents for all of the tested soils measured with capacitance-based sensor probes were faster and more direct than those of water tensions measured with porous and ceramic cup-based tensiometers when water was applied, indicating water content would be a better control variable for automatic irrigation. The required water estimation-based irrigation method provided relatively stable control of moisture tension, even though somewhat lower tension values were obtained as compared to the target tension of -20 kPa, indicating that growers could expect to be effective in controlling low tensions ranging from -10 to -20 kPa with the required water estimation system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.13-21
• /
• 2014

This study generated regression models to quantify storage and annual uptake of carbon from five native landscape tree species through a direct harvesting method, and established essential information to estimate carbon reduction effects from urban greenspaces. Tree species for the study included the Chionanthus retusus, Prunus armeniaca, Abies holophylla, Cornus officinalis, and Taxus cuspidata, which are usually planted in cities of middle Korea, but for which no information on carbon reduction is available. Ten tree individuals for each species were sampled reflecting various stem diameter sizes at a given interval. The study measured biomass for each part including the roots of sample trees to compute total carbon storage per tree. The annual carbon uptake per tree was quantified by analyzing the radial growth rates of stem samples at breast height or ground level. Regression models were developed using diameter at breast height (dbh) or ground level (dg) as an independent variable to easily estimate storage and annual uptake of carbon per tree for each species. All the regression models showed high fitness with $r^2$ values of 0.92~0.99. Storage and annual uptake of carbon from a tree with dbh of 10 cm were greatest with C. retusus (20.0 kg and 5.9 kg/yr, respectively), followed by P. armeniaca (17.5 kg and 4.5 kg/yr) and A. holophylla (13.2kg and 1.8 kg/yr) in order. A C. officinalis tree and T. cuspidata tree with dg of 10 cm stored 9.3 and 6.3 kg of carbon and annually sequestered 3.2 and 0.6 kg, respectively. The above-mentioned carbon storage equaled the amount of carbon emitted from gasoline consumption of about 23~35 L for C. retusus, P. armeniaca, and A. holophylla, and 11~16 L for C. officinalis and T. cuspidata. A tree with the diameter size of 10 cm annually offset carbon emissions from gasoline use of about 6~10 L for C. retusus, P. armeniaca, and C. officinalis, and 1~3 L for A. holophylla and T. cuspidata. The study breaks new ground to easily quantify biomass and carbon reduction for the tree species by overcoming difficulties in direct cutting and root digging of urban landscape trees.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.21-28
• /
• 2006

Purpose: The purpose of this study is to find a optimal beam spoiler condition on the dose distribution near the surface, when treating a squamous cell carcinoma of the head and neck and a lymphatic region with 10 MV photon beam. The use of a optimal spoiler allows elivering high dose to a superficial tumor volume, while maintaining the skin-sparing effect in the area between the surface to the depth of 0.4 cm. Materials and Methods: The lucite beam spoiler, which were a tissue equivalent, were made and placed between the surface and the photon collimators of linear accelerator. The surface-dose, the dose at the depth of 0.4 cm, and the maximum dose at the dmax were measured with a parallel-plate ionization chamber for $5{\times}5cm\;to\;30{\times}30cm^2$ field sizes using lucite spoilers with different thicknesses at varying skin-to-spoiler separation (SSS). In the same condition, the dose was measured with bolus and compared with beam spoiler. Results: The spoiler increased the surface and build-up dose and shifted the depth of maximum dose toward the surface. With a 10 MV x-ray beam and a optimal beam spoiler when treating a patient, a similer build-up dose with a 6 MV photon beam could be achieved, while maintaining a certain amount of skin spring. But it was provided higher surface dose under SSS of less than 5 cm, the spoiler thickness of more than 1.8 cm or more, and larger field size than $20{\times}20cm^2$ provided higher surface dose like bolus and obliterated the spin-sparing effect. the effects of the beam spoiler on beam profile was reduced with increasing depths. Conclusion: The lucite spoiler allowed using of a 10 MV photon beam for the radiation treatment of head and neck caner by yielding secondary scattered electron on the surface. The dose at superficial depth was increased and the depth of maximum dose was moved to near the skin surface. Spoiling the 10 MV x-ray beam resulted in treatment plans that maintained dose homogeneity without the consequence of increased skin reaction or treat volume underdose for regions near the skin surface. In this, the optimal spoiler thickeness of 1.2 cm and 1.8 cm were found at SSS of 7 cm for $10{\times}10cm^2$ field. The surface doses were measured 60% and 64% respectively. In addition, It showed so optimal that 94% and 94% at the depth of 0.4 cm and dmax respectively.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.6
• /
• pp.601-612
• /
• 2003

In Korean history, vegetables were the major side dishes of meals and originally korean diets were based on vegetables. But recently people prefer meat dishes rather than vegetables and traditional vegetable cooking seems to be disappeared. So it is needed to be positioning the importance of vegetables in food culture of Korean. In present study, history of vegetable eating was reviewed and recent consumption pattern were analyzed. 1. Since the era of the three Kingdom's and Koryo dynasty, the kinds of vegetables varied and at Chosun Dynasty people used similar kinds of vegetables as nowadays except a few things. A Garlic and mug wort had been used from the age of tribes to present and an egg, apple, cucumber, lettuce from the three Kingdom and a bamboo sprout, a taro, a burdock, a radish, a turnip, a stone-leek, a scallion, a Chinese cabbage, a marsh mallow, a spinach and a crown daisy from Koryo Dynasty and a pepper, a pumpkin, a tomato, a cabbage, a salary, a kale, a turnip and a beet from Chosun Dynasty to present. A guard, a water shield plant, a yam and wild plants would have been used before but they would not use any more. 2. Current vegetable consumptions of Korean is 232.2kg/person/yr and comparing with world mean consumption(101.9kg), Koreans still eat the largest amount of vegetables than any other countries and among Asian countries, Koreans consume more vegetables than China(203.5kg) and Japanese people(111.6kg) do. 3.The most frequently consumed vegetables were vegetables for seasonings such as a garlic or stone-leek and for kimchi such as a Chinese cabbage, radish, and carrot. But from data of Korean National Health and Nutrition Survey(2001), kinds of vegetables which people had were only 72 items showing that the kinds of vegetables were limited. 4. A lot of wild plants that would have been used for famine relief are now disappeared and on the other hand, it is increasing of some new and foreign vegetables and herbs. Cooking methods and intake pattern of vegetables are changed and varied so a traditional cooking method such as namuel is less preferred than before. But vegetable wrapping and green vegetable juice, eating uncooked vegetables(sang-sik) are very popular.

• Journal of Food Hygiene and Safety
• /
• v.33 no.3
• /
• pp.168-175
• /
• 2018

The use of microwave-assisted extraction and an acid-base clean-up process to determine the amount of methylmercury (MeHg) in marine products was suggested in order to improve the complicated sample preparation process. The optimal conditions for microwave-assisted extraction was developed by using a 10% NaCl solution as an extraction solution, setting the extraction temperature at $50^{\circ}C$, and holding for 15 minutes to extract the MeHg in marine products. A NaOH solution was selected as a clean-up substitute instead of L-cysteine solution. Overall, 670 samples of marine products were analyzed for total mercury (Hg). Detection levels were in the range of $0.0006{\sim}0.3801{\mu}g/kg$. MeHg was analyzed and compared using the current food code and the proposed method for 49 samples which contained above 0.1 mg/kg of Hg. Detection ranges of methylmercury followed by the Korea Food Code and the proposed method were $75.25(ND{\sim}516.93){\mu}g/kg$ and $142.07(100.14{\sim}244.55){\mu}g/kg$, respectively. The total analytical time of proposed method was reduced by more than 25% compared with the current food code method.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.1022-1030
• /
• 1998

Background : In volume-controlled ventilation, the use of inspiratory pause increases the inspiratory time and thus increases mean airway pressure and improves ventilation. But under the same I : E ratio, the effects of inspiratory pause on mean airway pressure and gas exchange are not certain. Moreover, the effects may be different according to the resistance of respiratory system. So we studied the effects of inspiratory pause on airway pressure and gas exchange under the same I : E ratio in volume-controlled ventilation. Methods: Airway pressure and arterial blood gases were evaluated in 12 patients under volume-controlled mechanical ventilation with and without inspiratory pause time 5%. The I : E ratio of 1 : 3, $FiO_2$, tidal volume, respiratory rate, and PEEP were kept constant. Results: $PaCO_2$ with inspiratory pause was lower than without inspiratory pause ($38.6{\pm}7.4$ mmHg vs. $41.0{\pm}7.7$ mmHg. p<0.01). P(A-a)$O_2$ was not different between ventilation with and without inspiratory pause $185.3{\pm}86.5$ mmHg vs. $184.9{\pm}84.9$ mmHg, p=0.766). Mean airway pressure with inspiratory pause was higher than without inspiratory pause ($9.7{\pm}4.0\;cmH_2O$ vs. $8.8{\pm}4.0\;cmH_2O$, p<0.01). The resistance of respiratory system inversely correlated with the pressure difference between plateau pressure with pause and peak inspiratory pressure without pause (r=-0.777, p<0.l), but positively correlated with the pressure difference between peak inspiratory pressure with pause and peak inspiratory pressure without pause (r=0.811, p<0.01). Thus the amount of increase in mean airway pressure with pause positively correlated with the resistance of respiratory system (r=0.681, p<0.05). However, the change of mean airway pressure did not correlated with the change of $PaCO_2$. Conclusion: In volume-controlled ventilation under the same I : E ratio of 1 : 3, inspiratory pause time of 5% increases mean airway pressure and improves ventilation. Although the higher resistance of respiratory system, the more increased mean airway pressure, the increase in mean airway pressure did not correlated with the change in $PaCO_2$.

• Journal of Animal Environmental Science
• /
• v.16 no.3
• /
• pp.205-215
• /
• 2010

Geothermal heat pump system (GHPS) is an energy-efficient technology that use the relatively constant and renewable energy stored in the earth to provide heating and cooling. With the aim of using GHPS as a heating source, it's possibilities of application in farrowing house were examined by measuring environmental assessment and sow's performance. A total of 96 sows were assigned to 2 pig housings (GHPS and conventional housing) with 48 for four weeks in winter season. During the experimental period, indoor maximum temperature in GHPS-housing was measured up to $26.7^{\circ}C$, average temperature could maintain $21.2^{\circ}C$. The mean value of dust levels and $CO_2$, $NH_3$ and $H_2S$ gas emissions were decreased in GHPS-housing compare with those of conventional housing. Litter size, birth weight, parity and weaning weight did not differ between housings. However, feed intake of sow in GHPS-housing was lower than that of conventional housing. In energy consumption for heating, electric power consumption increased in GHPS-housing than the conventional housing, a 2,250 kwh increase, whereas there is no fuel usage for heater in GHPS-housing. Amount of ground water circulated for heating in cold weather for earth heat exchanger was 8.4-12.9 ton per day. In conclusion, GHPS may have environmental benefits and effectiveness of heating in farrowing housing and affect the performance in sows.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.59-65
• /
• 2005

This study was performed to estimate the soil loss on a national scale and grade regions with the potential risk of soil erosion. Universal soil loss equation (USLE) for rainfall and runoff erosivity factors (R), cover management factors (C) and support practice factors (P) and revised USLE for soil erodibility factors (K) and topographic factors (LS) were used. To estimate the soil loss, the whole nation was divided into 21,337 groups according to city county, soil phase and land use type. The R factors were high in the southern coast of Gyeongnam and Jeonnam and part of the western coast of Gyeonggi and low in the inland and eastern coast of Gyeongbuk. The K factors were higher in the regions located on the lower streams of rivers and the plain lands of the western coast of Chungnam and Jeonbuk. The average slope of upland areas in Pyeongchang-gun was the steepest of 30.1%. The foot-slope areas from the Taebaek Mountains to the Sobaek Mountains had steep uplands. Total soil loss of Korea was estimated as $50{\times}10^6Mg$ in 2004. The potential risk of soil erosion in upland was the severest in Gyeongnam and the amount of soil erosion was the greatest in Jeonnam. The regions in which annual soil loss was estimated over $50Mg\;ha^{-1}$ were graded as "the very severe" and their acreage was $168{\times}10^3ha$ in 2004. The soil erosion maps of city/county of Korea were made based on digital soil maps with 1:25,000 scale.

• Journal of Climate Change Research
• /
• v.2 no.4
• /
• pp.283-295
• /
• 2011

Many actions against climate change have been taken to reduce greenhouse gases (GHGs) emissions at home and abroad. As of 2007, the GHGs emitted from buildings accounted for about 23 % of Korea's total GHGs emission, which is the second largest GHG reduction potential following industry. In this study, we introduced Carbon Zero Building (CZB), which was constructed by the National Institute of Environmental Research to cut down GHGs from buildings in Korea, and evaluated the main applied technologies, the amount of energy load and reduced energy, and economic values for CZB to provide data that could be a basis in the future construction of this kind of carbon-neutral buildings. A total of 66 technologies were applied for this building in order to achieve carbon zero emissions. Applied technologies include 30 energy consumption reduction technologies, 18 energy efficiency technologies, and 5 eco-friendly technologies. Out of total annual energy load ($123.8kWh/m^2$), about 40% of energy load ($49kWh/m^2$) was reduced by using passive technologies such as super insulation and use of high efficiency equipments and the other 60% ($74.8kWh/m^2$) was reduced by using active technologies such as solar voltaic, solar thermal, and geothermal energy. The construction cost of CZB was 1.4 times higher than ordinary buildings. However, if active technologies are excluded, the construction cost is similar to that of ordinary buildings. It was estimated that we could save annually about 102 million won directly from energy saving and about 2.2 million won indirectly from additional saving by the reduction in GHGs and atmospheric pollutants. In terms of carbon, we could reduce 100 ton of $CO_2$ emissions per year. In our Life Cycle Cost (LCC) analysis, the Break Even Point (BEP) for the additional construction cost was estimated to be around 20.6 years.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.31-38
• /
• 2019

This study quantified, through a direct harvesting method, storage and annual uptake of carbon from open-grown trees for three landscape tree species frequently planted in the southern region of Korea, and developed quantitative models to easily estimate the carbon reduction by tree growth for each species. The tree species for the study included Camellia japonica, Lagerstroemia indica, and Quercus myrsinaefolia, for which no information on carbon storage and uptake was available. Ten tree individuals for each species (a total of 30 individuals) were sampled considering various stem diameter sizes at given intervals. The study measured biomass for each part of the sample trees to quantify the total carbon storage per tree. Annual carbon uptake per tree was computed by analyzing the radial growth rates of the stem samples at breast height or ground level. Quantitative models were developed using stem diameter as an independent variable to easily calculate storage and annual uptake of carbon per tree for study species. All the quantitative models showed high fitness with $r^2$ values of 0.94-0.98. The storage and annual uptake of carbon from a Q. myrsinaefolia tree with dbh of 10 cm were 24.0 kg and 4.5 kg/yr, respectively. A C. japonica tree and L. indica tree with dg of 10 cm stored 11.2 kg and 8.1 kg of carbon and annually sequestered 2.6 kg and 1.2 kg, respectively. The above-mentioned carbon storage equaled the amount of carbon emitted from the gasoline consumption of about 42 L for Q. myrsinaefolia, 20 L for C. japonica, and 14 L for L. indica. A tree with the diameter size of 10 cm annually offset carbon emissions from gasoline use of approximately 8 L for Q. myrsinaefolia, 5 L for C. japonica, and 2 L for L. indica. The study pioneers in quantifying biomass and carbon reduction for the landscape tree species in the southern region despite difficulties in direct cutting and root digging of the planted trees.