• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.3
• /
• pp.178-184
• /
• 2005

Carry over contamination has been reduced in some systems by flushing the internal and external surfaces of the sample probe with copious amount of diluent. It between specimens should be kept as small as possible. A built-in, continuous-flow wash reservoir, which allows the simultaneous washing of the interior and exterior of the syringe needles, addresses this issue. In addition, residual contamination can further be prevented through the use of efficient needle rinsing procedures. In discrete systems with disposable reaction vessels and measuring cuvets, any carry over is entirely caused by the pipetting system. In analyzers with reuseable cuvets or flow cells, carry over may arise at every point through which high samples pass sequentially. Therefore, disposable sample probe tips can eliminate both the contamination of one sample by another inside the probe and the carry over of in specimen into the specimen in the cup. The results of the applicative carry over experiment studied on 21 items for total protein (TP), albumin (ALB), total bilirubin (TB), alkaline phosphatase (ALP), aspratate aminotranferase (AST), alanine aminotranferase (ALT), gamma glutamyl transferase (GGT), creatinine kinase (CK), lactic dehydrogenase (LD), creatnine (CRE), blood urea nitrogen (BUN), uric acid (UA), total cholesterol (TC), triglyceride (TG), glucose (GLU), amylase (AMY), calcium (CA), inorganic phosphorus (IP), sodium (Na), potassium (K), chloride (CL) tests in chematology were as follows. Evaluation of process performance less than 1% in all tests was very good, but a percentage of ALB, TP, TB, ALP, CRE, UA, TC, GLU, AMY, IP, K, Na, and CL was 0%, implying no carry over. Other tests were ALT(-0.08%), GGT(-0.09%), CK(0.08%), LD(0.06%), BUN(0.12%), TG (-0.06%), and CA(0.89%).

• Journal of the Korea Society for Simulation
• /
• v.27 no.1
• /
• pp.101-109
• /
• 2018

Field experiments as well as numerical analyses with finite element analysis codes are two valuable and complemental ways to understand the structural response under explosive blast load. However, there seems to be only limited information available about finite element analysis and experimental validation on the response of structural components under internal explosions. For complementary use of the two ways, the numerical analyses should be validated with field experiments by comparing their results. In this paper, a small-scaled reinforced concrete building with a room is employed for experimental investigations. An amount of TNT is detonated at the center of the room. Pressure at three different sites in the room, displacement of centers of two walls, and damage patterns of four walls are measured and compared to results from numerical analyses. The experimental results are much similar to the numerical analyses results. The finite element analysis code ANSYS AUTODYN is employed to numerically analyze both pressure distribution inside the room and response of walls subjected to blast pressure. The feasibility and validity of the numerical analysis on the reponses of structural components under internal explosions are discussed in terms of structural damage assessment, and evaluated as the same damage in the analysis and the experiments.

• Journal of Korean Society on Water Environment
• /
• v.37 no.1
• /
• pp.32-46
• /
• 2021

South Korea has been divided into quantities and water quality, and due to a revision of the Government Organization law in June 2018, the controversial water management system was integrated into the Ministry of Environment. The total Maximum Daily Loads System has been called the flower of water quality control, and since 2004, all three major river systems which have been introduced into the Han River system, despite its various difficult environments, and subsequently leading to all of the four major rivers undergoing obligatory implementation since 2013. Currently, the target TMDL (Han River Phase 1 and Other Water Systems Phase 3) for the 2020 stage has been implemented. The domestic TMDL established a basic plan for calculating the load which complies with the unit watershed's target water quality, as well as an implementation plan for annual load management, both which have been institutionalized in order to evaluate load compliance on a repeated annual basis. Local governments ask external organizations to conduct investigations every year in order to assess the transition, which thereby requires tens of millions of won every year. Therefore, an assessment and management model that can be easily operated at the TMDL personnel level is required. In this study, when the Han river Water System TMDL was implemented in earnest, we confirmed the the water quality improvement effect when TMDL was introduced to major inflow tributaries (TancheonA, JungnangA, AnyangA) under the Seoul City's jurisdiction through the use of the total amount control unit basin evaluation technique. By presenting customized management measures, we propose the guidelines that are necessary for determining more effective water environmental policies.

• Journal of Broadcast Engineering
• /
• v.26 no.2
• /
• pp.125-131
• /
• 2021

In recent years, Convolutional Neural Networks (CNNs) have achieved outstanding performance in the fields of computer vision such as image classification, object detection, visual quality enhancement, etc. However, as huge amount of computation and memory are required in CNN models, there is a limitation in the application of CNN to low-power environments such as mobile or IoT devices. Therefore, the need for neural network compression to reduce the model size while keeping the task performance as much as possible has been emerging. In this paper, we propose a method to compress CNN models by combining matrix decomposition methods of LR (Low-Rank) approximation and CP (Canonical Polyadic) decomposition. Unlike conventional methods that apply one matrix decomposition method to CNN models, we selectively apply two decomposition methods depending on the layer types of CNN to enhance the compression performance. To evaluate the performance of the proposed method, we use the models for image classification such as VGG-16, RestNet50 and MobileNetV2 models. The experimental results show that the proposed method gives improved classification performance at the same range of 1.5 to 12.1 times compression ratio than the existing method that applies only the LR approximation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.186-188
• /
• 2014

In recent years, domestic as well as LTE wireless network of Wi-Fi and most used. In addition, mobile-intensive services that used mainly in our society makes it easier, SNS, application (APP), and file downloads. As such, the amount of data requested, while living at the time of mobile users will want to be safe from the earliest. And the wireless network communications mortality (3G, 4G (LTE), LTE-A) and Wi-Fi (802.11 n-2.4 G H z z H a c-5, 802.11 G), and users are mainly used in the death 4G (LTE), communication Wi-Fi, 802.11 n-2.4 GHz are used most frequently. As above, use the wireless network in order to safely and quickly developed the technology of the Li-Fi. Li-Fi light (visible light) technology to communicate with, and Wi-Fi (802.11 n-2.4 G z H) 100 times faster, LTE-A 66 times faster. However, the current Li-Fi to commercialise the big issue exists. In this paper, there are a lot of existing problems in the commercialization of Li-Fi being used in Wi-Fi, and a comparative analysis.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.50-53
• /
• 2019

Purpose Yttrium-90 (Y-90) is high-energy beta emitters ($E{\beta}$, max = 2.28 MeV) with the mean penetration depth of 2.5 mm in tissue. Radioactive microspheres containing Y-90 is widely used for the transarterial radioembolization of hepatocellular carcinoma. However, bremsstrahlung radiation from Y-90 can cause the external radiation exposure to medical staff who handle the Y-90 microspheres. In this study, shielding device for Y-90 microspheres was developed to minimize the external radiation exposure. Materials and Methods Y-90 microsphere shielding device was made from 6 mm thicknesses of tungsten including the lead glass window. Radiation shielding ability of Y-90 microsphere shielding device was evaluated using 4 GBq of $SIR-Spheres^{(R)}$ Y-90 microspheres. The bremsstrahlung radiation was measured using radiation survey meter. Results The mean radiation dose of Y-90 microspheres in acrylic shield was $261.7{\pm}2.3{\mu}Sv/h$ (n=5) at 10 cm away from the shield. With the additional tungsten shielding device, it was $23.7{\pm}1.3{\mu}Sv/h$ (n=5). Thus, the bremsstrahlung radiation dose was decreased by 90.9%. At 50 cm away from the shield, bremsstrahlung radiation was reduced by 89.2% after using tungsten shielding device. Conclusion During the preparation and radioembolization of Y-90 microsphere, medical staff are exposed to external radiation. In this study, we demonstrated that the use of tungsten shielding device devices significantly reduced the amount of bremsstrahlung radiation. Y-90 microsphere tungsten shielding device can be highly effective in reducing the bremsstrahlung radiation.

• Informatization Policy
• /
• v.26 no.1
• /
• pp.62-82
• /
• 2019

This study attempts to make an empirical analysis on how mobile devices affect users in building their social relationship and if their influences are negative or positive. The purpose of this research is to explain the results by considering all the possibilities and exploring everyday lives of using mobile devices. We used the survey data from the "Research on Mobile Environment Awareness" conducted by Gyeonggi Research Institute(GRI). The main question was about the use of mobile devices and social network services (SNS) and users' opinions on using the devices. All of the 31 municipalities in Gyeonggi Province were included as a spatial range, and the final validity sample was 1,004 residents. The extent of the relationship with people is selected as a dependent variable through the multinomial logistic model and the decision tree model. As a result of the multinomial logistic analysis on the questionnaire, the characteristics of the respondents with some changes in the scope of the human relationship were found to have a significant (+) effect on conversation with family, SNS usage, residence in the rural area but not urban area, and device usage for obtaining news. The largest variable affecting the extent of relationship was the SNS usage. As the amount of SNS usage increases, the extent of the relationship also changes a lot.

• Journal of the Korean Society for Library and Information Science
• /
• v.53 no.2
• /
• pp.201-221
• /
• 2019

The Korea Institute of Civil Engineering and Building Technology provides the documents and information on the construction technology through the Construction Technology Digital Library System to enhance the technological competitiveness of the construction engineers. The purpose of this study is to measure the monetary value of information service quality in order to improve the documents and information service quality provided by this system. For this purpose, a questionnaire model was designed to apply the DBDC- CVM. We surveyed the members of 300 this systems for the amount of information that they are willing to pay to maximize the quality of information service. The correlation between the dependent variable and the explanatory variables was analyzed with the basic statistics of the survey results. The independent variables affecting the dependent variable are statistically significant. The logit model is used to estimate the monetary value of individual respondents who are willing to pay for information service quality. In previous research, we measured the use value of information service. On the other hand, this study shows that the measurement of value based on information service quality is different from previous research.

• Clean Technology
• /
• v.27 no.3
• /
• pp.269-274
• /
• 2021

Bioenergy is generally considered to be one of the options for pursuing carbon neutrality. However, for a period of time, combustion of harvested plant biomass inevitably causes more carbon dioxide in the atmosphere than combustion of fossil fuels. This paper proposes a method that predicts and minimizes the total amount and payback period of this carbon debt. As a case study, a carbon cycle impact assessment was performed for immediate switching of the currently used fossil fuels to biomass. This work points out a fundamental vulnerability in the concept of carbon neutrality. As an action plan for the sustainability of bioenergy, formulas for afforestation proportional to the decrease in the forest area and surplus harvest proportional to the increase in the forest mass are proposed. The results of optimization indicate that the carbon debt payback period is about 70 years, and the carbon dioxide in the atmosphere increases by more than 50% at a maximum and 3% at a steady state. These are theoretically predicted best results, which are expected to be worse in reality. Therefore, biomass is not truly carbon neutral, and it is inappropriate as an energy source alternative to fossil fuels. The method proposed in this work is expected to be able to contribute to the approach to carbon neutrality by minimizing present and future carbon debt of the bioenergy that is already in use.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.229-235
• /
• 2021

Globally, due to climate change and urbanization, problems with water cycle destruction in urban areas frequently occur. In order to solve this problem, LID technique is being actively conducted the application in urban and research. In this study, some areas of the new city located in Busan was constructed using a widely used SWMM model to verify the effectiveness of the LID technique. This is to present a plan to maximize the efficiency of urban water cycle of the stormwater management target figure and the LID scale calculation method. In addition, the efficiency of runoff reduction using stormwater storage basin was analyzed in urban development projects. By calculating the scale of customized LID for each sub basin, the amount of runoff and peak runoff after LID application was reduced by 86.8 % and 69.5 %, respectively. Depending on the application of the stormwater storage basin, the reduction effect of peak runoff from 0.5 m³/s to 4.9 m³/s and delay effect of 8 minutes to 10 minutes was shown.