• Journal of the Korean Chemical Society
• /
• v.60 no.3
• /
• pp.194-202
• /
• 2016

Two conjugated semiconducting copolymers consisting of 4,7-bis(4-(2-ethylhexyl)-2-thiophene)-2,1,3-benzothiadiazole (DTBT) and benzo[1,2-b:4,5-b']dithiophene with 5-(2-ethylhexyl)-2,2'-bithiophene (BDTBT) or 5-(2-ethylhexylthio)- 2,2'-bithiophene (BDTBT-S) were designed and synthesized as donor materials for organic photovoltaic cells (OPVs). Alkylthio-substituted PBDTBT-S-DTBT showed a higher hole mobility and lower highest occupied molecular orbital (HOMO) energy level (by 0.08 eV) than the corresponding alkyl-substituted PBDTBT-DTBT. An OPV fabricated using PBDTBT-S-DTBT showed higher V_OC and J_SC values of 0.83 V and 7.56 mA/cm², respectively, than those of a device fabricated using PBDTBT-DTBT (0.74 V) leading to a power conversion efficiency of 2.05% under AM 1.5G 100 mW/cm² illumination.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1756-1760
• /
• 2016

Estimation of feed intake (FI) for individual animals within a pen is needed in situations where more than one animal share a feeder during feeding trials. A partitioning method (PM) was previously published as a model to estimate the individual FI (IFI). Briefly, the IFI of a pig within the pen was calculated by partitioning IFI into IFI for maintenance ($IFI_m$) and IFI for growth. In the PM, $IFI_m$ is determined based on the metabolic body weight (BW), which is calculated using the coefficient of 106 and exponent of 0.75. Two simulation studies were conducted to test the hypothesis that the use of different coefficients and exponents for metabolic BW to calculate $IFI_m$ improves the accuracy of the estimates of IFI for pigs, and that PM is applied to pigs fed in group-housing systems. The accuracy of prediction represented by difference between actual and estimated IFI was compared using PM, ratio (RM), or averaging method (AM). In simulation studies 1 and 2, the PM estimated IFI better than the AM and RM during most of the periods (p<0.05). The use of 0.60 as the exponent and the coefficient of 197 to calculate metabolic BW did not improve the accuracy of the IFI estimates in both simulation studies 1 and 2. The results imply that the use of $197kcal{\times}kg\;BW^{0.60}$ as metabolizable energy for maintenance in PM does not improve the accuracy of IFI estimations compared with the use of $106kcal{\times}kg\;BW^{0.75}$ and that the PM estimates the IFI of pigs with greater accuracy compared with the averaging or ratio methods in group-housing systems.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.5
• /
• pp.315-323
• /
• 2022

PURPOSE. The purpose of this study was to investigate the effect of barium silicate filler contents on mechanical properties of resin nanoceramics (RNCs) for additive manufacturing (AM). MATERIALS AND METHODS. Additively manufactured RNC specimens were divided into 4 groups depending on the content of ceramic fillers and polymers: 0% barium silicate and 100% polymer (B0/P10, control group); 50% barium silicate and 50% polymer (B5/P5); 60% barium silicate and 40% polymer (B6/P4); 67% barium silicate and 33% polymer (B6.7/P3.3). The compressive strength (n = 15) and fracture toughness (n = 12) of the specimens were measured, and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analyses were performed. Independent sample Kruskal-Wallis tests were performed on the compressive strength and fracture toughness test results, and the significance of each group was analyzed at the 95% confidence interval through post-tests using the Bonferroni's method. RESULTS. B6/P4 and B6.7/P3.3 exhibited much higher yield strength than B0/P10 and B5/P5 (P < .05). Compared to the control group (B0/P10), the other three groups exhibited higher ultimate strength (P < .05). The fracture toughness of B6/P4 and B6.7/P3.3 were similar (P > .05). The content of barium silicate and fracture toughness showed a positive correlation coefficient (R = 0.582). SEM and EDS analyses revealed the presence of an oval-shaped ceramic aggregate in B6/P4 specimens, whereas the ceramic filler and polymer substrate were homogeneously mixed in B6.7/P3.3. CONCLUSION. Increasing the ceramic filler content improves the mechanical properties, but it can be accompanied by a decrease in the flowability and the homogeneity of the slurry.

• Speech Sciences
• /
• v.9 no.4
• /
• pp.27-38
• /
• 2002

The purpose of this article is to present the acoustic parameters (VOT, jitter, shimmer, vF0, vAm, NHR, SPI, VTI, DVB, DSH) for consonants (/pipi/, /$p^{h}ip^{h}i$/, /p'ip'i/) and sustained vowels (/a/, /e/, /i/) produced by normal subjects and dysphonia patients at two vocal effort(normal, high) by Lombard effect using 60dB white noise. Lombard effect indicates the vocal effort increase in noisy situation. At normal vocal effort, in general the acoustic parameter values of patients are greater than normal. And in noisy situation, significant decrease of acoustic values is seen in normal compared with in dysphonia patients. The clinical implication of this finding, the vocal quality in dysphonia is not compensated by vocal effort as well as normal subjects because of the inefficiency caused by abnormal vocal fold appearance and function. And with this result, we can counsel that the voice quality can not be improved as well as the patient expect.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1030-1033
• /
• 2003

This paper presents the deposition characterization of polycrystalline silicon films by the HWCVD(Hot-wire Chemical Vapor Deposition) method at low substrate($300^{\circ}C$). The filament temperature, pressure and $SiH_4$ concentration were determined to be a critical parameter for the deposition of poly-Si films. Series A was deposited under the conditions of $1380^{\circ}C$(Tf), 100 mTorr and $2{\sim}10%\{SiH_4/(SiH_4+H_2)\}$ for 60 min. Series B was deposited under the conditions of $1400{\sim}1450^{\circ}C$ (Tf), 30 mTorr and $2{\sim}12%$ for 60 min. The physical characteristics were measured by Raman and FTIR spectroscopy, dark and photoconductivity measurements under AM1.5 illumination.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1592-1594
• /
• 2003

This paper presents the deposition and characterization of microcrystalline silicon(${\mu}c$-Si:H) films by HWCVD(Hot-wire Chemical Vapor Deposition) method at low substrate($300^{\circ}C$). The filament temperature, pressure and $SiH_4$ concentration were determined to be a critical parameter for the deposition of poly-Si films. Series A was deposited under the conditions of $1380^{\circ}C$(Tf), 100 mTorr and $2{\sim}10%\{SC:SiH_4/(SiH_4+H_2)\}$ for 60 min. Series B was deposited under the conditions of $1400{\sim}1450^{\circ}(T_f)$, 30 mTorr and $2{\sim}12%$(SC) for 60 min. The physical characteristics were measured by Raman and FTIR spectroscopy, dark and photoconductivity measurements under AM1.5 illumination.

• Korean Journal Plant Pathology
• /
• v.1 no.1
• /
• pp.33-37
• /
• 1985

A yellow stripe and bud benting disease of soybean was commonly observed on the field at Suweon area. The causal agent was identified as alfalfa mosaic virus (AMV) by indicator plant reactions, physical properties, serological test and electron microscopy. AMV produced vein clearing, top necrosis, top bent and mottling on the parts of soybean plants. Local lesions were produced on the inoculated leaves of Vigna sesquipedialis, Vicia faba and Tetragonia expansa, while Chenopodium am, anticolor, C. quinoa, Pisum satvium, Petunia hybrida and Nicotiana tabacum 'Bright yellow' were systemically infected. The thermal inactivation point was $60^{\circ}C$, dilution end point was $10^{-3}$, and longevity in vitro was 2 days at room temperature. AMV from soybean was reacted with AMV - antiserum in agar gel diffusion test. Electron microscopy of AMV from soybean exhibited bacilliform particles of 60nm in length.

• Culinary science and hospitality research
• /
• v.18 no.5
• /
• pp.279-292
• /
• 2012

This study was performed to investigate the quality characteristics and antioxidant activity of noodle added freeze-dried purple sweet potato powder. For Hunter's color resulted, as the amount of purple sweet potato powder increased, L-value and b-value decreased, the a-value increased. Anthocyanin contents of purple sweet potato powder at concentration of (mg/100 g) were 99.62%. DPPH radical scavenging activities of purple swe et potato powder at concentration of $1,000{\mu}L/mL$ were 84.60%. The texture of cooked noodles appeared no significant differences in cohesiveness, Springiness, Hardness, Gumminess and Chewiness decreased as the am ount of purple sweet potato powder increased. The weight, volume, moisture contents of noodles were not significantly. Sensory evaluation of acceptability including color, aroma, taste, chewiness and overall-acceptabi lity appeared the 6% added group was the best for higher. According to the positively evaluated anthocyanin content, DPPH radical scavenging activities, quality characteristics and sensory evaluation, a purple sweet pota to powder content 6% appears to be most appropriate.

• Mycobiology
• /
• v.33 no.1
• /
• pp.51-60
• /
• 2005

Pot greenhouse experiments were carried out to attempt to increase the salinity tolerance of one of the most popular legume of the world; cowpea; by using dual inoculation of an Am fungus Glomus clarum and a nitrogen-fixer Azospirillum brasilense. The effect of these beneficial microbes, as single- or dual inoculation-treatments, was assessed in sterilized loamy sand soil at five NaCl levels ($0.0{\sim}7.\;2ds/m$) in irrigating water. The results of this study revealed that percentage of mycorrhizal infection, plant height, dry weight, nodule number, protein content, nitrogenase and phosphatase activities, as well as nutrient elements N, P, K, Ca, Mg were significantly decreased by increasing salinity level in non-mycorrhized plants in absence of NFB. Plants inoculated with NFB showed higher nodule numbers, protein content, nitrogen concentration and nitrogenase activities than those of non-inoculated at all salinity levels. Mycorrhized plants exhibited better improvement in all measurements than that of non-mycorrhized ones at all salinity levels, especially, in the presence of NFB. The concentration of $Na^+$ was significantly accumulated in cowpea plants by rising salinity except in shoots of mycorrhizal plants which had $K^+/Na^+$ ratios higher than other treatments. This study indicated that dual inoculation with Am fungi and N-fixer Azospirillum can support both needs for N and P, excess of NaCl and will be useful in terms of soil recovery in saline area.

• Korean Journal of Veterinary Service
• /
• v.18 no.1
• /
• pp.41-56
• /
• 1995

The present study was conducted to investigate results of B. anthracis isolated from Anthrax in the Kyong-Ju of Feb. 12. 1994. 1. In biochemical feature, B. anthracis was a gram-positive rod, non-motility, sporulation, capsulation. It was positive in gelatinase, starch hydrolysis, glucose. But negative in urease, arabinose, mannitol, xylose. 2. B. anthracis grew well on B4 Br A TSA after incubation for 24 hours. The organisim grew well on BA, Br. A, NA, TSA after incubation for 72 hours. The media grew well on Br A instead of BA. 3. On 5% blood agar by laboratory animal, ${\beta}$ -hemolysis was produced from 36 hours to 48 hours incubation. There was perfect ${\beta}$-hemolysis after incubation for 48 hours. On the other side ${\beta}$-hemolysis was begun on 5% goat blood agar after incubation for 60 hours. 4. In the test of antimicrobial susceptibility, B. anthracis was very sensitive to AM, CF, TE, ENR, GM, AN, DFX, S, P, TYLO, N, KM, C, E, Lins＋Sp, NN, CC, CFP, CB were sensitive one by one. B. anthracis was no-sensitive to L, XNL, TIA, CL, SXT 5. B. anthracis had never sensitivity to direct inoculation of rat and chicken, after subcutanous inj. It was very sensitive to mouse and goat, hamster, guinea pig, rabbit had a sensibility one by one. 6. The dead laboratory animal which had been inoculated with B. anthracis preserved at $37^{\circ}C$ incubation, B. anthracis didn't cultivate on non-dissected animal after 80 hours but cultivate on dissected animal after 360 hours. 7. The rapidly death could cause high concentration, died from 420 after S. C. 8. The blood smeared samples of hamster from inoculation with B. anthracis, spore germinated In 37$^{\circ}C$ after 5 hours, in $32^{\circ}C$ after 6 hours, in room temperature after 9 hours, in $-4^{\circ}C$ to $-20^{\circ}C$ after 10 hours. 9. B, anthracis inoculated to laboratory animal after SC or PO. Mice and rats feces didn't cultivated with B. anthracis after SC, but did cultivated with B. anthracis after PO. 10. In the test of disinfectant, B. anthracis was high effective to $HgC1_2$, formalin, effect phenol, cresol, but non-effect NaOH, ethanol.