• Title/Summary/Keyword: AKD Emulsion

Search Result 10, Processing Time 0.016 seconds

Development and Application of Fast-cured AKD Emulsion (급속반응형 AKD Emulsion의 개발 및 적용)

  • Choi, Won-Hee;Shin, Jong-Ho;Park, Min-Tae
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2002.11a
    • /
    • pp.218-226
    • /
    • 2002
  • 제지분야에서 중성 사이즈제로 광범위하게 사용되어지는 AKD emulsion의 사이징 효과의 발현속도가 낮은 단점을 보완하기 위하여, 기존 AKD emulsion에 추가 투입 사용함으로써 발현속도를 높여줄 수 있는 AKD 급속 반응형 정착제, 그리고 정착제를 사용하지 않는 초지 시스템에서도 급속 경화가 가능한 급속 반응형 AKD emulsion을 개발 하였다. AKD 급속 반응형 정착제의 투입량 및 종이 건조시간에 따른 사이징 효과를 상용화된 정착제와 비교하였으며 이 결과로부터 보다 빠른 사이징 효과발현을 확인하였다. 정착제를 사용하지 않는 시스템에서 급속반응형 AKD emulsion의 사이즈도 급속발현 효과를 확인하기 위하여 상용화된 emulsion과 사용량에 따른 사이징 효과와 건조시간에 따른 사이징효과를 비교함으로서 사이즈도의 급속 발현을 확인 할 수 있었다.

  • PDF

A Study on Stability of AKD-Emulsion (AKD 에멀션의 안정성 평가)

  • Kwon, Won-Tae;Kim, Jeong-Hi;Shin, Jong-Ho;Park, Min-Tae
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2002.11a
    • /
    • pp.209-217
    • /
    • 2002
  • Stability deterioration of AKD emulsion was studied with respect of the physical change of emulsion particles and the chemical change of AKD itself. Four kinds of commercial emulsions were kept at RT, 40, 50, and $60^{\circ}C$ water bath, respectively. Viscosity, particle size distribution, and solid contents of the emulsions were measured with storage time. At the same time, by performing NMR and IR spectroscopy analysis of the solvent-extracted AKD from the emulsions, the qualitative and quantitative information about the deformation of the AKD itself were obtained. AKD was gradually hydrolyzed to become dialkylketone and higher storage temperature accelerated destabilization of the AKD emulsions.

  • PDF

Alkaline Sizing of Mechanical Pulp

  • Kim, Bong-Yong;Akira Isogai
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.32 no.5
    • /
    • pp.1-7
    • /
    • 2000
  • Alkaline Sizing behavior and mechanism of handsheets, which were prepared from thermomechanical pulp (TMP) with alkylketene dimer (AKD), were studied in terms of the conditions of the handsheet-making. AKD content in the TMP handsheets was increased with increasing of AKD addition level and the addition of a polyamideamine-epichlorohydrin resin (PAE) clearly enhanced AKD retention as well as the resultant sizing performance of TMP handsheets. Although drying of the AKD sized TMP webs at $20^{\circ}C$ led to no or quite low sizing level, but TMP handsheets sized with AKD had higher sizing degrees with increasing of the temperature of heat treatment. Scanning electron microscopic observations of the AKD-sized TMP handsheets showed that AKD emulsion particles were present on pulp fiber surfaces independently without coagulation in the TMP handsheets dried at $20^{\circ}C$. Heat treatment of the AKD-sized handsheets resulted in disappearance of the AKD emulsion particles because of their melting and spreading. The addition of calcium carbonate filler to the TMP suspensions did not influence on AKD content in the TMP handsheets. Nevertheless, their sizing degrees clearly increased by the addition of $CaCO_3$filler. Probably, AKD molecules adsorbed on the $CaCO_3$filler particles contribute to the enhancement of sizing performance. Thus, AKD can give sizing features effectively to the TMP handsheets, when they are made under suitable conditions.

  • PDF

A Quantitative Analysis Method for Studing AKD Hydrolysis (AKD 가수분해 연구를 위한 정량분석 방법)

  • 민춘기;신동소
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.30 no.3
    • /
    • pp.29-37
    • /
    • 1998
  • In order to set up a proper AKD quantification method for studing AKD hydrolysis, a quantitative analysis method using Uv/vis spectroscopy was evaluated and compared to the conventional GC-MS analysis. Hydrolysis rates of AKD emulsions during storage at 4$0^{\circ}C$ were measured by the UV/vis analysis. Owing to its simplicity and capability of measuring the unreacted AKD significantly even in a small amount, UV/vis method proved to be more suitable for studing AKD hydrolysis than GC-MS analysis. AKD hydrolysis was affected by the types of emulsifiers. Polymer stabilized AKD emulsion hydrolyzed more rapidly than starch stabilized AKD.

  • PDF

THE EFFECT OF HYDROLYZED ALKYLKETENE DIMER ON SIZING DEVELOPMENT

  • Seo, Won-Sung;Shin, Jong-Ho;Cho, Nam-Seok
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 1999.11b
    • /
    • pp.50-55
    • /
    • 1999
  • Sizing development of AKD-sized paper by beta-ketoester formation has been debated until recent years because of absence of its obvious and direct spectroscopic evidence. In this study, reaction between AKD and cellulose was investigated to disclose the possibility of beta-ketoester formation between two components under no catalyzed neutral condition. In absence of water, AKD reacted with cellulose to form beta-ketoester linkage under no catalyzed neutral condition, while, in presence of water, most of AKD was hydrolyzed to a dialkyl ketone or beta-ketoacid. Therefore, the main mechanism of AKD sizing would not be the formation of beta-ketoester between AKD and cellulose in the papermaking process. It could be suggested that the sizing development of AKD-sized paper is obtained by next two mechanisms: 1) formation of a thin-layer of AKD on the fiber surface through melting and spreading of AKD emulsion particles by heat, and 2) the formation of ketone by the hydrolysis of AKD during drying and storage of AKD-sized papers.

REACTION OF PAPER PULP AND ALKYL KETENE DIMER BY AGING TREATMENT DURING PAPERMAKIN PROCESS

  • Shin, Young-Doo;Seo, Won-Sung;Cho, Nam-Seok
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2000.11a
    • /
    • pp.83-83
    • /
    • 2000
  • Alkylketene dimer was known as a cellulose reactive or alkaline size because it does not require to fix to the fiber as do the traditional rosin sizes. A proposed sizing mechanism of AKD was the formation of P -ketoester bond between AKD and cellulose which provides the permanent attachment and the orientation of the hydrophobic alkylchains outward. However, some questions about the reaction had arisen and thus, the sizing mechanism of AKD has been a subject of controversy for several decades. The major concern of the controversy is that AKD is really reactive with cellulose or not in the papermaking conditions. In this study, reaction between AKD and pulp fiber was investigated, in order to find out whether AKD forms P-ketoester with pulp fiber during aging under no catalyzed neutral condition with obvious spectroscopic evidence. In addition, effect of aging treatment on the sizing development was studied. It has been disclosed that, in absence of water, AKD reacted with cellulose to form P -ketoester linkage under no catalyzed neutral condition, while, in presence of water, most of AKD was hydrolyzed to a dialkyl ketone or P -ketoacid. In addition, during the aging treatment of AKD-sized paper, its typical IR spectra bands gradually were reduced, completely disappeared after 6hr aging, and formed new absorption bands at 1707cm-' and shoulder peak at 1700cm-' which refer to the typical dialkylketone absorption bands. Therefore, the formation of P -ketoester between AKD and pulp fiber is impossible in the practical papermaking process. It could be suggested that the sizing development of AKD-sized paper is obtained by next two mechanism: 1) formation of a thin-layer of AKD on the fiber surface through melting and spreading of AKD emulsion particles by heat and 2) the hydrolysis of AKD to dialkyl ketone which has higher melting point, during drying and storage of AKD sized papers.

  • PDF

Effect of Spreading of Neutral Sizing Agent, Alkylketene Dimer, on Sizing Development

  • Seo Won-Sung;Shin Jong-Ho;Cho Nam-Seok
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.37 no.5 s.113
    • /
    • pp.1-7
    • /
    • 2005
  • The objective of this work was to investigate the effect of spreading behavior of the sizing agents (AKD or dialkyl ketone) on the sizing development of AKD-sized paper. There was a direct relationship between the spreading behavior of the sizing agents and their melting points. Both AKD and dialkyl ketone showed no substantial spreading until the temperature reaches to their melting points. Consequently, dialkyl ketone did not provide sizing development when the paper was heat-treated below $75^{\circ}C$, while AKD provided sizing effect even the paper heated at $50^{\circ}C$. The ketone, however, provided rather higher sizing effect than that of AKD, when the paper was heat-treated over $100^{\circ}C$. This result means that the ketone also gives sizing development to paper, moreover the ketone could give higher sizing effect to paper than AKD when it was melted and well spreaded on the fiber surface. While the ketone introduced to papers from hydrolyzed AKD emulsion could not contribute to sizing development.

Dimensional Stability of Korean Red Pine Treated with Water Repellents (발수제 처리 소나무재의 치수안정성)

  • Han, Gyu-Seong
    • Journal of the Korea Furniture Society
    • /
    • v.19 no.3
    • /
    • pp.172-179
    • /
    • 2008
  • The objective of this study was to investigate the influence of the water repellents' treatment on the water absorptivity and the dimensional stability of Korean red pine wood(Pinus densiflora). The alkylketene dimer(AKD), fluororesin emulsion(Wood-seal, WS), and paraffin wax emulsions(PW25, PW40, and PW1200) were used as water repellents. PW40 and WS were proved as excellent water repellents for pine wood, because the samples treated with these agents showed high contact angles and large reduction in water absorptivities. Also, the dimensional stability(antiswelling efficiency) of pine wood was considerably improved by water repellents treatments, such as PW40 and WS at the pressure of 2MPa. The water repellent treated woods with WS, PW40, and PW1200 at the pressure of 2MPa were relatively stable to the wet-dry cyclic leaching test.

  • PDF