• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.83-89
• /
• 2007

It is expected that advanced high strength steels (AHSS) would be widely used for vehicles with better performance in automotive industries. One of distinctive features of AHSS is the high value of carbon equivalent (Ceq), which results in the different properties in formability, weldability and paintability from those of common grade of steel sheets. There is an exponential relation between Ceq and electric resistance, which seems also to have correlation with the thickness of electric deposition (ED) coat. Higher value of Ceq of AHSS lower the thickness of ED coat of AHSS. Some elements of AHSS such as silicon, if it is concentrated on the surface, affect negatively the formation of phosphates. In this case, silicon itself doesn't affect the phosphate, but its oxide does. This phenomenon is shown dramatically in the welding area. Arc welding or laser welding melts the base material. In the process of cooling of AHSS melt, the oxides of Si and Mn are easily concentrated on the surface of boundary between welded and non‐welded area because Si and Mn could be oxidized easier than Fe. More oxide on surface results in poor phosphating and ED coating. This is more distinctive in AHSS than in mild steel. General results on paintability of AHSS would be reported, being compared to those of mild steel.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.83-83
• /
• 2009

The automotive chassis components are structural assemblies that support the engine, suspension, and steering components of the vehicle. For the development of AHSS components, the durability analysis is important. In this paper, the low cycle fatigue property of AHSS was evaluated for the geometry complex and local plasticity in the base material. The GMAW optimization was implemented for the weld soundness using the moving least square method. And the weld S-N curves of AHSS were evaluated to access durability analysis for the weld region. For the verification, the durability analysis of the couple torsion beam axle (CTBA) was performed and compared to the rig test result. The durability analysis using the low cycle fatigue property and the evaluated weld S-N curve of AHSS met the good agreement with the test result.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.2
• /
• pp.213-222
• /
• 2015

This study was performed to investigate the dietary habits and satisfaction of school foodservice by high school type (academic high school students (AHSS) : n=200, vocational high school students (VHSS) : n=200). Frequency of skipping breakfast was significantly higher for VHSS compared with AHSS (p<0.001), and reasons for skipping breakfast were significantly high for 'lack of time' and 'habitually' in VHSS (p<0.01). Duration of mealtime was significantly higher for AHSS compared with VHSS (p<0.001). Frequency of snacking was high in both AHSS and VHSS, and after dinner was the most common snack time for AHSS (p<0.001). Most commonly cited methods for improving dietary habits were 'frequently skipping meals' in AHSS and 'irregular meals' in VHSS. Reasons for leaving leftover foods were 'no taste' in AHSS and 'side dish I don't like' in VHSS (p<0.05). Satisfaction of school foodservice was significantly higher for AHSS compared with VHSS (p<0.05). Most commonly cited methods for improving school foodservice were 'varied menu' in AHSS and 'food taste' in VHSS (p<0.05). Commonly cited dietary motivations were 'preference' in AHSS and 'resolving starvation' in VHSS (p<0.001). As preference is an important factor, new menu development and continuous nutritional education should be necessary for menu diversity in order to raise satisfaction by using foods with high preference and superior nutrition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.729-730
• /
• 2012

• Journal of Welding and Joining
• /
• v.33 no.4
• /
• pp.50-56
• /
• 2015

In general, discontinuity of metallurgical and structural points of weld zone could decline the fatigue strength. For the lightweight trend, the AHSS application in automotive chassis is in-progress. However, there are few research reports on AHSS welds fatigue strength in especially automotive chassis parts. Therefore, in this study, we evaluated the effects of the factors affecting the AHSS welding fatigue strength. As the result, the stress concentration of weld bead is the most important factor for welding fatigue strength. For the enhancement of welding fatigue strength, we focused on reducing the stress concentration of the welding beads. So, we applied and proved the plasma welding process and GTAW (Gas Tungsten Arc Welding) dressing method. It was verified by uniaxial fatigue specimen, fatigue performance increased from 40 to 60% by applying TIG dressing method compared to the conventional GMAW (Gas Metal Arc Welding). These results could be recommended the enhancement of fatigue performance of AHSS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.104-111
• /
• 2009

In this paper, optimization for frontal crashworthiness is carried out for the weight reduction design of an auto-body member with the advanced high strength steels(AHSS) such as 780TRIP and 780DP. The frontal crashworthiness is evaluated in order to optimize thicknesses for the front rail member of the ULSAB-AVC, Thicknesses of the front rail member with AHSS are optimized by comparison of crushing distance, absorbed energy and the deceleration for the auto-body with the response surface methodology. The results demonstrate that the crashworhiness of the front rail member with the optimum thicknesses of the AHSS is similar to analysis results obtained from the ULSAB-AVC project. The results also show that the weight reduction design is performed by substituting the AHSS for conventional structural steels such as 440E in the auto-body members.

• Corrosion Science and Technology
• /
• v.6 no.4
• /
• pp.193-197
• /
• 2007

It is well known that the development of Advanced High Strength Steels (AHSS) is very important for the automotive industry in order to improve fuel efficiency and the reduction of material costs. However, it is particularly difficult to improve the surface quality of AHSS because the high amount of Si, Al, Mn and Ti etc. in AHSS promote selective oxidation, resulting in surface defects. The reheating process in the hot strip mill would cause severe oxidation because it is carried out at elevated temperatures under aggressive environments. In this study a reheating furnace simulator was developed to investigate oxidation phenomena in the reheating process. The environmental gas for the reheating furnace was made by burning coke oven gas with air in the simulator. The air/fuel ratio is precisely controlled by MFC. Ti oxides are easily formed on grain boundaries and Mn and Si oxides are usually formed in inner grains near the steel surface with a small round shape.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.75-80
• /
• 2015

Self-piercing riveting is an joining method of advanced high strength steels (AHSS) and other dissimilar materials. It has attracted considerable interest from the automotive industry. The SPR has become an interesting alternative joining technique for difficult to weld materials such as steels and aluminium alloys. In this paper, self-piercing rivet and anvil for SPR were designed for the joining conditions with AHSS and aluminium alloy. Various conditions of SPR were simulated for the design of rivets and anvils. The simulated results were in good agreement with experimental ones. As a result, over HV500 rivet is desirable to joint SPFC780 AHSS and aluminum alloy.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.55-59
• /
• 2015

Self-piercing riveting (SPR) is a sheet-joining method that can be used for materials that are difficult or unsuitable for weld, such as aluminum alloys and other steel sheet metals. The increased application of lightweight materials has initiated many investigations into new SPR conditions for riveting dissimilar materials. However, buckling of the semi-tubular rivet occurs during the riveting of AHSS. In this study, a helical SPR was designed for the riveting of AHSS and Al-alloy. In addition, the reinforced helical SPR which has straight parts was designed. The riveting of AHSS and Al-alloy was simulated. Simulated results were verified by comparison with experimental ones.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.31-31
• /
• 2009

최근 전세계적으로 유가상승 및 환경에 대한 관심이 증대되면서 자동차 업계에서는 차량 경량화를 통한 연비향상에 대한 연구가 활발히 진행되고 있다. 대표적인 기술개발 사례로서 초경량 철강 차체의 개발을 들 수 있다. 이는 고장력강을 적용함으로써 강성을 증대시킴과 동시에 두께감소에 의한 경량화를 이루고자 추진되고 있다. 하지만 고장력강은 자체의 높은 강성을 지니고 있는 반면, 일반 강종에 비해서 스프링백이 크고 용접성도 많이 떨어지는 제약을 안고 있다. 아크 용접법 중 하나인 AC pulse MIG 용접은 DCEP (direct current electrode positive) 와 DCEN (direct current electrode positive) 구간이 주기적으로 반복하는 용접법으로 스패터 발생이 거의 없으며 특히 갭 접합성이 우수하여 자동차 차체 조립공정에 적용되고 있다. 본 연구에서는 자동차 차체용 AHSS 소재의 겹치기 용접 실험을 통해 실제 생산라인에서 용접 이음부에 발생되는 갭에 대해 강건한 용접 공정 조건을 제시하였다. 먼저 고속카메라 촬영을 통해 AC pulse MIG 용접에서 EN ratio 변화에 따른 와이어 용융현상을 분석 하였으며 단면마크로, 인장시험, 인장 파단면 분석을 통해 겹치기 용접에서 0~2mm 사이의 갭 발생에 강건한 용접 조선을 제시하였다.