• Carbon letters
• /
• 제1권1호
• /
• pp.36-40
• /
• 2000

The initial irreversible capacity (IIC) of a hard carbon during the charge/discharge reaction is strongly affected by both the initial irreversible capacity on the carbon surface $(IIC_S)$ and the initial irreversible lithium insertion into carbon $(IIC_B)$. The initial coulombic efficiency of the insertion and the desertion of lithium (IIE) can be used as a performance to classify $IIC_B$ of the carbon. The $IIC_B$ was proportional to the specific discharge capacity with a slope, $IIE^{-1}$ - 1. The IIE of hard carbon had four regions. $IIE_A$ for the region of 0~95 mAh/g of $Q_{D1}$ was 60.2%. $IIE_B$ and $IIE_C$ for the regions of 95~172 mAh/g and 172~308 mAh/g had 84.9% and 91.5%, respectively. $IIE_D$ was appeared above 308 mAh/g. But, the $IIE_D$ was reduced to 82.1% compared with $IIE_C$. These IIE might be corresponding to lithium desertion from carbon at the region of 0~172 mAh/g range, lithium desertion from the micropore of carbon at the region of 172~308 mAh/g range, and to the lithium stripping of the plated lithium for the region above 308 mAh/g, respectively.

• 대한임상약리학회:학술대회논문집
• /
• 대한임상약리학회 1996년도 정기총회 및 추계학술대회
• /
• pp.36-36
• /
• 1996

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 춘계학술발표대회 개요집
• /
• pp.36-38
• /
• 2002

This paper is a study on the effect of the cutting speed, length of tip-specimen and cutting thickness in CNC gas cutting of the high-tensile steel plate(AH36). Experiments were performed to investigate the variations of cutting surface, surface roughness and kerf width under various cutting conditions.

• 식품산업과 영양
• /
• 제21권2호
• /
• pp.36-39
• /
• 2016

• 한국당과학회:학술대회논문집
• /
• 한국당과학회 2006년도 제1회 연례학술대회
• /
• pp.35-36
• /
• 2006

• 폴리머
• /
• 제36권5호
• /
• pp.637-642
• /
• 2012

실리카로 충전된 SBR(styrene butadiene rubber)/BR(butadiene rubber) 합성고무 복합소재에 대해서 가공기기의 구조가 실리카 분산에 미치는 영향을 파악하기 위해 주사전자 현미경(SEM-scanning electron microscope)을 이용하여 컴파운드의 모폴로지를 관찰하였다. Internal mixer 내에서 intermeshing rotor와 tangential rotor에 의해 배합된 컴파운드를 비교한 결과, intermeshing rotor에 의해 가공되었을 경우 실리카 입자가 더 고르게 분산 및 분포되었음을 관찰하였다. Rotor의 geometry 차이에 의해 intermeshing rotor가 tangential rotor보다 더 큰 전단력(shear)을 컴파운드에 전달하여 실리카 입자를 효과적으로 분산 및 분배시킨 것으로 판단된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.762-781
• /
• 2018

This paper presents the ballistic armor performance examination and thickness estimation for the latest naval ship structure materials in the Republic of Korea. Up to date, research regarding methods of ballistic experiments establishing database on the latest hull structure materials as well as a precise method of estimating required thickness of armor against specific projectiles have been rarely researched. In order to build a database and estimate proper thicknesses of structure materials, this study used four structure materials that have been widely applied in naval ships such as AH36 steel, AL5083, AL5086, and Fiber Reinforced Plastics (FRP). A $7.62{\times}39mm$ mild steel core bullet normally fired by AK-47 gun was considered as a threat due to its representativeness. Tate and Alekseevskii's penetration algorithm was also used to calculate a correction factor (${\alpha}$) and then estimate the armor thickness of naval ship hull structure materials with a given impact velocity. Through live fire experiments, the proposed method performance difference was measured to be 0.6% in AH36, 0.4% in AL5083, 0.0% in AL5086, and 8.0% in FRP compared with the experiment results.

• 한국수산과학회지
• /
• 제50권3호
• /
• pp.287-295
• /
• 2017

Egg development and morphological change of larvae of the Sakhalin sole Limanda sakhalinensis were studied by observing specimens obtained in a rearing experiment from fertilized eggs to the juvenile stage. The wild broodstock was collected in January 2010 and kept in a circular water tank (${\O}1.5{\times}1m$) at a temperature of $14.5{\pm}0.5^{\circ}C$. Fertilized eggs ranged from 0.72 to 0.82 mm ($0.77{\pm}0.07mm$, $mean{\pm}SD$) in diameter. The eggs were spherical, transparent and adhesive demersal. The egg yolk was divided from the oocyte 10 min after fertilization (AF), and an embryo was formed in 36 h AF. More than 50% of the eggs hatched within 133 h AF. The mouth and anus did not open until $3.5{\pm}0.25mm$ total length (TL). At 4, days after hatching (AH), the fish became larvae 3.7 to 4.2 mm ($4.0{\pm}0.36mm\;TL$), yolk absorption was completed and the mouth began to open. The left eye moved upward and the nostril moved to the right at 39 days AH. These post-larvae ranged from 8.0 to 9.9 mm TL ($8.9{\pm}1.33mm\;TL$). At 50 days AH, the fish became juveniles ($12.4{\pm}1.20mm\;TL$) There were 70-72 dorsal fin rays, 55-56 anal fin rays, 11 pectoral fin rays, and 6 ventral fin rays and the juveniles adopted a benthic life.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.1-9
• /
• 2021

With the convergence of the information and communication technologies, a new age of technological civilization has arrived. This is the age of intelligent revolution, known as the 4th industrial revolution. The 4th industrial revolution is based on technological innovations, such as robots, big data analysis, artificial intelligence, and unmanned transportation facilities. This revolution would interconnect all the people, things, and economy, and hence will lead to the expansion of the industry. A high-density, high-capacity energy technology is required to maintain this interconnection. As a next-generation energy source, lithium-ion batteries are in the spotlight today. However, lithium-ion batteries can cause thermal runaway and fire because of electrical, thermal, and mechanical abuse. In this study, thermal runaway was induced in 72.5 Ah NCM pouch-type lithium-ion batteries because of thermal abuse. The surface of the pouch-type lithium-ion batteries was heated by the hot plate heating method, and the effect of the rate of increase in the surface temperature on the thermal runaway trigger time was analyzed using Minitab 19, a statistical analysis program. The correlation analysis results confirmed that there existed a strong negative relationship between each variable, while the regression analysis demonstrated that the thermal runaway trigger time of lithium-ion batteries can be predicted from the rate of increase in their surface temperature.

• Restorative Dentistry and Endodontics
• /
• 제45권1호
• /
• pp.2.1-2.7
• /
• 2020

Objectives: This study aimed to evaluate the cell viability and migration of Endosequence Bioceramic Root Canal Sealer (BC Sealer) compared to MTA Fillapex and AH Plus. Materials and Methods: BC Sealer, MTA Fillapex, and AH Plus were placed in contact with culture medium to obtain sealers extracts in dilution 1:1, 1:2 and 1:4. 3T3 cells were plated and exposed to the extracts. Cell viability and migration were assessed by 3-(4,5-dimethylthiazoyl)-2,5-diphenyl-tetrazolium bromide (MTT) and Scratch assay, respectively. Data were analyzed by Kruskal-Wallis and Dunn's test (p < 0.05). Results: The MTT assay revealed greater cytotoxicity for AH Plus and MTA Fillapex at 1:1 dilution when compared to control (p < 0.05). At 1:2 and 1:4 dilutions, all sealers were similar to control (p > 0.05) and MTA Fillapex was more cytotoxic than BC Sealer (p < 0.05). Scratch assay demonstrated the continuous closure of the wound according to time. At 30 hours, the control group presented closure of the wound (p < 0.05). At 36 hours, only BC Sealer presented the closure when compared to AH Plus and MTA Fillapex (p < 0.05). At 42 hours, AH Plus and MTA Fillapex showed a wound healing (p > 0.05). Conclusions: All tested sealers demonstrated cell viability highlighting BC Sealer, which showed increased cell migration capacity suggesting that this sealer may achieve better tissue repair when compared to other tested sealers.