• Clinical and Experimental Pediatrics
• /
• v.49 no.8
• /
• pp.857-863
• /
• 2006

Purpose : To evaluate the immunogenicity of hepatitis B vaccine among very low birth weight infants(VLBWI) who were vaccinated at 0, 1, 6 months of chronological age and to determine the factors associated with antibody formations. Methods : A total of 243 VLBWI admitted to Seoul and Gangneung Asan Medical Center neonatal intensive care units from 1997 to 2004 were included. Of 243, 13 infants were born to HBs Ag positive mother. All infants were given DNA recombinant vaccine at 0, 1, and 6 months of chronological age. Infants born to HBs Ag positive mothers received hepatitis B immunoglobulin at birth and a total of 4 doses of vaccinations. An antibody level over 10 mIU/mL, tested at 3-4 months after last vaccination, was regarded as a positive seroconversion. Results : The seroconversion rates were 84.4 percent and 84.5 percent for VLBWI and extremely low birth weight infants(ELBWI), respectively. Of 28 seronegative infants who were given revaccinations, 60.7 percent seroconverted, resulting in 95.3 percent, 97.5 percent seroconversion rates for VLBWI and ELBWI, respectively. 76.9 percent of infants born to HBsAg positive mothers seroconverted and none became hepatitis B carriers. Factors such as gestational age, sex, various neonatal illness, and kinds of vaccinations did not influence the formation of the hepatits B antibody, however, the higher the weight at time of first vacciation yielded better seroconversion rate. Conclusion : Revaccination of seronegative VLBWI after 3 doses of hepatitis B vaccinaton is very effective. Therefore, testing the immune status after the hepatitis B vaccination, a practice not routinely done, is highly recommended.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.95-102
• /
• 2013

Purpose: Using a laboratory indented cylinder separator, broken rice separation experiments were conducted and the characteristics of the separation process were studied to provide information for developing a prototype indented cylinder broken rice separator. Methods: Rice (Ilmi variety) milled in a local RPC was used for the experiment. Rice kernels were classified into four groups according to their length l; whole kernels (I > 3.75 mm), semi-whole kernels (2.5 < I < 3.75 mm), broken kernels (1.75 < I < 2.5 mm), and foreign matters (I < 1.75 mm). A laboratory grain cleaner, Labofix '90 (Schmidt AG, Germany) was used for the experiments. Experiments were designed as a $4{\times}4$ factorial arrangement in randomized blocks with three replications. Cylinder rotational speeds (17, 34, 51, 68 rpm) and trough angles (15, 37.5, 60, $82.5^{\circ}$) were the two factors and feed rates (25, 50 kg/h), indent shapes (Us, $S_1$ type), and indent sizes (2.5, 3.75 mm) were treated as the blocks. Two 125 g samples and one 125 g sample were taken at the cylinder outlet and from the trough, respectively. The whole, semi-whole, and broken kernel weight ratio of the samples and feed was determined by a rice sizing device. From these weight ratios, purities, degrees of extraction and coefficient of separation efficiency were calculated. Results: Trough angle, cylinder speed, and their interaction on the coefficient of separation efficiency were statistically significant. Cylinder speed of 17, 34, and 51 rpm made the most effective separation when the trough angle was $15^{\circ}$ or $37.5^{\circ}$, $60^{\circ}$, and $82.5^{\circ}$, respectively. Maximum values of coefficient of separation efficiency were in the range of 60 to 70% except when the indent size was 2.5 mm and were recorded for the combinations of low cylinder speed (17 rpm) with medium trough angle ($37.5^{\circ}$ or $60^{\circ}$). Indent shape did not appear to make any noticeable difference in separation efficiency. Conclusions: Due to the interaction effect, the trough angle needs to be increased appropriately when an increase in cylinder speed is made if a rapid drop of effectiveness of separation should be avoided. In commercial applications, $S_1$ type indents are preferred because of their better manufacturability and easier maintenance. For successful separation of broken kernels, the indent size should be set slightly bigger than the actual sizes of broken kernels: an indent size of 3.0 mm for separating broken kernels shorter than 2.5 mm.

• The Korean Journal of Physiology
• /
• v.24 no.1
• /
• pp.39-49
• /
• 1990

It has been reported that bombesin induces contraction of the smooth muscle of the gastrointestinal tract. Thus, the present investigation was undertaken to see an influence of bombesin on electrical activity of the gastric smooth muscle, since electrical activity is associated with contractile activity in the smooth muscle of the stomach. Smooth muscle strips $(5\;{\times}\;1.5\;cm)$ that included the corpus and antrum were prepared from the ventral and dorsal portion of the feline stomach along the greater curvature. Circular muscle strips $(1\;{\times}\;0.3\;cm)$ of the corpus were also obtained. Electrical activity of the corpus and antrum of the muscle strip was monophasically recorded by using Ag-AgCl capillary electrodes placed on the circular muscle layer. Contractile activity of the circular muscle strip was also recorded. The recordings were performed in Krebs-Ringer solution that was continuously aerated with $O_{2}$ containing 5% $Co_{2}$, and kept at $36^{\circ}C$. Dose-related responses of electrical activity and contractility to bombesin was studied after frequency of slow waves and contraction of each strip reached to a steady state. An action of $D-leu^{13}-{\psi}\;(CH_{2}NH)-D-leu^{14}-bombesin,\;D-pro^{2}-D-trp^{7,9}-substance\;P$, tetrodotoxin, hexamethonium, atropine, phentolamine or propranolol on the effect of bombesin was also observed. 1) Bombesin increased frequency of slow waves and contractions dose-dependently at concentrations from $10^{-9}\;M\;to\;3\;{\times}\;10^{-8}\;M$. 2) The bombesin analogue at a concentration of $3\;{\times}\;10^{-7}\;M$ antagonized the effect of bombesin on frequency of slow waves. 3) The effect of bombesin on frequency of slow waves was inhibited by tetrodotoxin $(10^{-6}\;M)$ and hexamethonium $(10^{-3}\;M)$ but unaffected by atropine $(10^{-6}\;M)$, phentolamine $(10^{-5}\;M)$ and propranolol $(10^{-5}\;M)$. 4) The effect of bombesin on frequency of slow waves was blocked by the substance P analogue at a concentration of $10^{-5}\;M$. 5) Substance P at a concentration of $10^{-5}\;M$ failed to change frequency of slow waves. It is concluded from the above results that bombesin increases the frequency of slow waves as well as contractions of the smooth muscle strip from the feline stomach, and the effect of bombesin might be mediated by non-cholinergic or non-adrenergic mechanism at neuromuscular junction. However, enteric nerves that have substance P as a neurotransmitter do not appear to participate in the action of bombesin on frequency of slow waves.

• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.39-59
• /
• 1985

The purpose of this study was to investigate how gap distances of 0.13mm, 0.15mm, 0.20mm, and 0.30mm affects solder joint strength from gold alloys and nickel-chromium base alloys and to examine the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys. The tensile test specimens were prepared in the split stainless steel mold with a half dumbbell shape 2.5mm in diameter and l2mm in length. 6 pairs of specimens of each gap distance group of gold alloys and nickel-chromium base alloys were made and 48 pairs of all specimens were soldered with solder gold of 666 fineness. All soldered specimens were machined to a uniform diameter and then a tensile load was applied at a cross-head speed of 0.10mm/min using Instron Universal Testing Machine, Model 1115. The fractured specimens at solder gold of solder joint fracture with each gap distance of 0.13mm, 0.15mm, 0.20mm, and 0.30mm were examined under the Scanning Electron Microscope, JSM-35c and the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys was analyzed by Electron Probe Micro Analyzer. The results of this study were obtained as follows: 1. In case of soldering of gold alloys, the tensile strength between gold alloys showed $37.33{\pm}2.52kg/mm^2$ at 0.13, $39.14{\pm}3.35kg/mm^2$ at 0.15mm, $43.76{\pm}2.97kg/mm^2$ at 0.20mm, and $49.18{\pm}4.60kg/mm^2$ at 0.30mm. There was statistically significant difference at each gap distance, and so the greater increase of gap distance showed the greater tensile strength. 2. In case of soldering of nickel-chromium base alloys, the tensile strength between nickel-chromium base alloys showed $34.84{\pm}4.26kg/mm^2$ at 0.13mm, $37.25{\pm}2.49kg/mm^2$ at 0.15mm, $42.91{\pm}4.32kg/mm^2$ at 0.20mm, and $46.93{\pm}4.21kg/mm^2$ at 0.30mm. There was not statistically significant difference only between 0.13mm and 0.15mm and bet ween 0.20 mm and 0.30mm, but generally the greater increase of gap distance showed the greater tensile strength. 3. The greater increase of gap distance shoed less porosities in solder gold at solder joint fracture. 4. In solder gold Au, Cu, Ag, Zn, and Sn were composed and Au and Cu were mostly distributed uniformly. 5. In solder joints of solder gold and gold alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Au, Cu, Ag, Pt, and Pd were composed in gold alloys. Au and Cu of solder gold and gold alloys were mostly distributed uniformly and the diffusion of other elements except Pt and Pd around the solder joint was not almost found. In solder joints of solder gold and nickel-chromium base alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Ni, Cr, and Al were composed in nickel-chromium base alloys. Au and Cu of solder gold and Ni and Cr of nickel-chromium base alloys were mostly distributed uniformly and the diffusion of other elements except Cr around the solder joint was not almost found.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.1
• /
• pp.78-85
• /
• 1996

The effects of growth regulators, sucrose and gelling agents were investigated to increase the efficiency of the callus growth and plant regenerarion in tissue culture of Angelica koreana Max. The fresh weight and dry weight of subcultured callus was highest in MS medium supplemented with 1 mg/l 2,4-D. Callus growth was excellent in 2% sucrose, but it was inhibited in propotion to sucrose content. Effect of gelling agents on callus growth was highest on 1.2% agar and 0.4% Gelrite medium, respectively. The browning of callus was protected on the media supplemented with 10 mg/l ABA and 5 or 10 mg/l $AgNO_3$. In the callus induction and growth from the peduncle of immature inflorescence, 2,4-D was more effective than NAA, and the frequency of callus induction was highest as 81.7% in 2 mg/l 2,4-D. Plant was not regenerated from the callus derived from young leaf. Somatic embryos were developed from the surface of callus drived from the peduncle of immature inflorescence in the medium containing 0.5 mg/l 2,4-D, 1 mg/l kinetin, 5 mg/l ABA and 5 mg/l $AgNO_3$. Plants were developed from the matured somatic embryos in the medium supplemented with 0.2 mg/l 2,4-D and 1 mg/l kinetin.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.413-431
• /
• 2011

An Epithemal Au-Ag mineralized zone is developed in the Moisan area of Hwangsan-myeon, Haenam-gun, Jeol-lanam-do, Korea, which is located in the southwestern part of the Ogcheon metamorphic zone. It is hosted in the Hwangsan volcaniclastics of the Haenam Formation of the Late Cretaceous Yucheon Group. This research investigated the characteristics of bedding arrangement, fold, fault, fracture system, quartz vein and the time-relationship of the fracture system to understand the geological structure related to the formation of the mineralized zone. On the basis of this result, the tectonic environment at the time of the mineralization was considered. Beds mainly trend east-northeast and gently dip into north-northwest or south-southeast. Their poles have been rearranged by subhorizontal-upright open fold of (east)-northeast trend as well as dip-slip fault. Fracture system was formed through at least 6~7 different deformation events. D1 event; formation phase of the main fracture set of EW (D1-1) and NS (D1-2) trends with a good extensity, D2 event; that of the extension fracture of NW trend, and conjugate shear fracturing of the EW (dextral) and NS (sinistral) trends, D3 event; that of the extension fracture of NE trend, and conjugate shear refracturing of the EW (sinistral) and NS (dextral) trends, D4 event; that of the extension fracture of NS trend showing a poor extensity, D5 event; that of the extension fracture of NW trend, and conjugate shear refracturing of the EW (dextral) and NS (sinistral) trends, D6 event; that of the extension fracture of EW trend showing a poor extensity. Frequency distribution of fracture sets of each deformation event is D1-1 (19.73 %)> D1-2 (16.44 %)> D3=D5 (14.79 %)> D2 (13.70 %)> D4 (12.33 %)> D6 (8.22 %) in descending order. The average number of fracture sets within 1 meter at each deformation event is D6 (5.00)> D5 = D4 (4.67)> D2 (4.60)> D3 (4.13)> D1-1 (3.33)> D1-2 (2.83) in descending order. The average density of all fractures shows 4.20 fractures/1 m, that is, the average spacing of all fractures is more than 23.8 cm. The frequency distribution of quartz veins at each orientation is as follows: EW (52 %)> NW (28 %)> NS (12 %)> NE (8 %) trends in descending order. The average density of all quartz veins shows 4.14 veins/1 m, that is, the average spacing of all quartz veins is more than 24.2 cm. Microstructural data on the quartz veins indicate that the epithermal Au-Ag mineralization (ca. 77.9~73.1 Ma) in the Moisan area seems to occur mainly along the existing D1 fracture sets of EW and NS trends with a good extensity not under tectonic stress but non-deformational environment directly after epithermal rupture fracturing. The D1 fracturing is considered to occur under the unstable tectonic environment which alternates compression and tension of NS trend due to the oblique northward subduction of the Izanagi plate resulting in the igneous activity and deformation of the Yucheon Group and the Bulguksa igneous rocks during Late Cretaceous time.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.403-411
• /
• 2001

The aim of this study was to evaluate the resistance to degradation of four commercial composite resins in an alkaline solution. The brands studied were Unifil(GC, Japan), Palfique(Tokuyama Japan). Definite$Degussa-H\ddot{u}ls$ AG, Germany). Revolution(Kerr, U.S.A.). Preweighed discs of each brand were exposed 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCl, washed with water and dried. Resistance to degradation was evaluated on the basis of following parameters: (a) mass loss(%) - determined from pre-and post-exposed specimen weights; (b) Si loss(ppm) - obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation depth$({\mu}m)$ - measured microscopically (SEM) from polished circular sections of exposed specimens. The results were follows: 1. The mass loss of Unifil was 3.21%, it was the highest of materials. But, there was no significant difference among the materials. 2. The degree of degradation layer depth was $107.69\sim47.40{\mu}m$, the sequence of the degree pf degradation layer depth was in descending order by Unifil, Palfique, Revolution, Definite. There was significant difference among the materials except Palfique and Definite. 3. The Si loss of Paltique was 8940.0ppm, it was the highest. There was significant difference among the materials, except Revolution and Definite(p<0.05). 4. The correlation coefficient between mass loss and degradation depth was relatively high(r = 0.06, p<0.05). 5. There was no significant coefficient correlation between Si loss and mass loss, and/or the degree of degradation layer depth and Si loss. 6. When observed with SEM, destruction of bonding is observed between resin matrix and filler. Above results suggested that the hydrolytic degradation is considered as evaluation factor of composite resins.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.673-682
• /
• 2001

The use of resin composites has continued to increase over the last several years. In spite of their growing popularity, composites continue to exhibit a number of undesirable characteristics. One of the major deficiencies of composite restorative resins is their inadequate resistance to wear. Of the multitude of factors that have been associated with wear, subsurface degradation within the restoration is considered to be one. The aim of this study was to evaluate the resistance to degradation of four commercial composite resins in an alkaline solution. This solution with a high concentration of hydroxyl ions is a convenient medium for accelerated degradation of silane coupling and filler particles. The brands studies were Definite($Degussa-H\ddot{u}ls$ AG, Germany), Prodigy(Kerr, USA), Pyramid(Bisco, USA) and Synergy(Coltene, Swiss). Preweighed discs of each brand were exposed to 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCl, washed with water and dried. Resistance to degradation was evaluated on the basis of following parameters : (a) mass loss(%)-determined from pre-and post-exposed specimen weights : (b) Si loss(ppm)-obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation $depth({\mu}m)$-measured microscopically (SEM) from polished circular sections of exposed specimens. The results were follows: 1. Mass loss of Synergy was $1.24{\pm}0.002%$, it was the highest, there was no significant difference among the materials. 2. The degree of degradation layer depth of Synergy was $107.83{\pm}2.52{\mu}m$, it was the highest, there was no significant difference among any other materials than Synergy. 3. There was no difference among the four materials in Si loss. 4. The correlation coefficient between mass loss and degradation depth was relatively high(r=0.06, p<0.05). 5. There was no coefficient correlation between Si loss and mass loss, the degree of degradation layer depth and Si loss. 6. When observed with SEM, destruction of bonding is observed between resin matrix and filler.

• Journal of Korean Society on Water Environment
• /
• v.25 no.1
• /
• pp.159-166
• /
• 2009

This study has been attempted to generate electricity, while simultaneously treating artificial organic wastewater using both batch and continuous microbial fuel cells (MFCs). In the batch MFC, current-voltage curve showed an onset potential of -0.69 V vs. Ag/AgCl. The potential range between this potential and 0 potential displayed an available voltage for an automatic production of electric energy and glucose, which was oxidized and treated at the same time. The 486 mg/L glucose solution showed the maximum power of $30mW/m^2$ and the maximum current density of $75mA/m^2$ shown in the power curve. As a result, discharging of the cell containing COD 423 mg/L at the constant current density of $60mA/m^2$ showed a continuous electricity generation for about 22 hours that dropped rapidly due to dissipating of organic material. Total electric energy production was 18.0 Wh. While discharging, the pH change was low and dropped from pH 6.53 to 6.20 then increased to 6.47, then stabilized at this charge. The COD treatment efficiency was found to be 72%. In the continuous MFC, COD removal tends to increase as the hydraulic retention time is increased. At one day of hydraulic retention time as the maximum value reaches the COD removal efficiency, power production rate and power production rate per COD removal that were obtained were 68.8%, $14mW/m^2$, and $20.8mW/m^2/g$ CODrm, respectively. In the continuous MFC, the power production rate per COD removal increases as the hydraulic retention time is increased and decreases as the organic loading rate is increased. At the values lower than an organic loading rate of $1kgCOD/m^3/d$, the values higher than about $18.1mW/m^2/g$ CODrm could be obtained.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3165-3172
• /
• 2012

Objective: Genetic polymorphisms in metabolic enzymes are associated with numerous cancers. A large number of single nucleotide polymorphisms (SNPs) in the CYP2D6 gene have been reported to associate with cancer susceptibility. However, the results are controversial. The aim of this Human Genome Epidemiology (HuGE) review and meta-analysis was to summarize the evidence for associations. Methods: Studies focusing on the relationship between CYP2D6 gene polymorphisms and susceptibility to cancer were selected from the Pubmed, Cochrane library, Embase, Web of Science, Springerlink, CNKI and CBM databases. Data were extracted by two independent reviewers and the meta-analysis was performed with Review Manager Version 5.1.6 and STATA Version 12.0 software. Odds ratios (ORs) with 95% confidence intervals (95%CIs) were calculated. Results: According to the inclusion criteria, forty-three studies with a total of 7,009 cancer cases and 9,646 healthy controls, were included in the meta-analysis. The results showed that there was a positive association between heterozygote (GC) of rs1135840 and cancer risk (OR=1.92, 95%CI: 1.14-3.21, P=0.01). In addition, we found that homozygote (CC) of rs1135840 might be a protective factor for cancer (OR=0.58, 95%CI: 0.34-0.97, P=0.04). Similarly, the G allele and G carrier (AG + GG) of rs16947 and heterozygote (A/del) of rs35742686 had negative associations with cancer risk (OR=0.69, 95%CI: 0.48-0.99, P=0.04; OR=0.60, 95%CI: 0.38-0.94, P=0.03; OR=0.50, 95%CI: 0.26-0.95, P=0.03; respectively). Conclusion: This meta-analysis suggests that CYP2D6 gene polymorphisms are involved in the pathogenesis of various cancers. The heterozygote (GC) of rs1135840 in CYP2D6 gene might increase the risk while the homozygote (CC) of rs1135840, G allele and G carrier (AG + GG) of rs16947 and heterozygote (A/del) of rs35742686 might be protective factors.