• Journal of Surface Science and Engineering
• /
• v.25 no.5
• /
• pp.263-269
• /
• 1992

To enhancing efficiency of hard chrome plating solution more highly, cathode current efficiency were surveyed connected with hardness of deposits, surface morphology, TEM analysis and corrosion test of anode materials. Efficiency war increased up to 26% values by adding catalyst and two kind of additives. With given bath composition and 6$0^{\circ}C$, 60A/d$\m^2$ electrolosis conditionss bright and micro cracked deposits were well obtained, which showed HV 1000 values. From corrosion tests, anode materials such as Pb-Te (0.02%) and Pb-Ag(1%) showed most anti-corrosive results. Through SEM micrograph observations, ef-fects of additives on levelling, brightness and micro crack properties of hard chrome deposits could be con-firmed. Also, through TEM analysis the fact that deposits from crack free solution or high speed solution were more fine than from sargent solution could be confirmed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.152-152
• /
• 2009

유기태양전지 Solvent인 1-2-Dichlorobenzene(DCB)에 1-Bromonaphtalene(BN)을 첨가하여 Air분위기에서 ZnO film을 이용한 유/무기 복합 태양전지를 만들었다. 셀의 구조는 ITO/ZnO nanofilm/Poly(3-hexylthiophene(P3HT):[6,6]-Phenyl C60-Butyric acid methyl ester(PCBM)/PEDOT:PSS/Ag로 제작했다. 두께 70nm ZnO film은 전기화학적 방법으로 ITO위에 전착하였다. AM1.5조건에서 Solar simulator로 측정한 결과 BN을 첨가한 셀에서 Jsc값이 증가되었다. Jsc값의 증가는 BN이 결정화를 향상시켜 효율이 증가됨을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.277-278
• /
• 2009

We have studied an angular dependence of emission pattern of top-emssion organic light-emitting diodes (TEOLED). Device structure is Al(100nm)/TPD(40nm)/$Alq_3$(60nm)/LiF(0.5nm)/Al(2nm)/Ag(30nm). N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine (TPD) and tris-(8-hydroxyquinoline) aluminium ($Alq_3$)were used as a hole transport layer and emission layer, respectively. Organic layers and cathode were thermally evaporated at $2\times10^{-5}$torr. The evaporation rate of the organic material was maintained to be $1.5\sim2.0{\AA}/s$, and that of metal layer to be $0.5\sim5{\AA}/s$. A transmittance of a cathode electrode(Al/Ag) in visible region is about 25~30%. In order to measure view-angle dependent intensity, electroluminenscence spectra of the device at each angle were integrated. Angle dependent emission spectra of the device do not show blue shift. Emission intensity of the device that the going straight characteristic is stronger the bottom-emission organic light-emitting diodes is shown.

• Applied Biological Chemistry
• /
• v.35 no.3
• /
• pp.165-169
• /
• 1992

Two types of $endo-{\beta}-1,3-glucanases$ were purified from green malt and their basic characteristics were studied. Molecular weights of glucanase I and glucanase II were estimated, by electrophoresis, to be 35,000 and 28,000, respectively. Purified glucanase I and II showed the highest activity at pH $5.0{\sim}7.0$ and $5.0{\sim}8.0$, respectively. The optimal temperature of purified glucanase I and II was $40^{\circ}C$. Purified glucanase I and glucanase II were stable at $40^{\circ}$ for 60 min and at $50^{\circ}$ for 30 min. All enzymes were inactivited by $AgNO_3$ and $HgCl_2$ while those were not activated by various compounds tried. Km values of glucanase I and II were 1.03 mg/ml, 1.20 mg/ml, respectively.

• Journal of Nutrition and Health
• /
• v.16 no.4
• /
• pp.263-272
• /
• 1983

Effects of dietary protein qualify, energy restriction, and subsequent rehabilitation were studied in the weanling rats. Rats were devided into the six experimental diet groups. Rats in AC (casein- containing diet ), AS (soyprotein-containing diet), and AG(gluten-containing diet) group consumed their diets ad libitum, and rats in PC, PS, PG groups were pair-fed in 60% of the of amounts eaten by corresponding rats in the AC, AS, AG groups, respectively. After 3 weeks of nutritional restriction, all rats were switched to the AC diet for 14 days. At the end of restriction period, body weight, weight gain, food intake, and FER were higher in casein- fed rats than other groups of rats. The differences were, however, disappeared with rehabilitation diet, except body weights which were not fully recovered until the end of experiment. The weights of liver, gastrocnemius muscle, kidney, small intestine, spleen, and lung were the highest in the casein group, and the lowest in gluten group at the end of restriction period. The recovery with rehabilitation diet were differ in different organs. The muscle and liver seemed to be the most affected organs by dietary protein quality and energy restriction. There were no differences in brain weights among the experimental groups during the restriction period, however, after 2 weeks of rehabilitation, rats in AC group showed lower brain weight compared to AC and AS groups, and the brain weight of PC group was lower than AC group. Protein contents in liver and muscle showed the same trends as their weights. Gluten-fed rats showed low serum protein concentration, but recovered fully with rehabilitation diet for 3 days.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.384-388
• /
• 2006

The adsorption ability of polar and toxic substance was greatly enhanced by treating activated carbon with acid solution and impregnating iron, copper, or silver by using in 0.1 M $FeSO_4{\cdot}7H_2O,\;CuSO_4{\cdot}5H_2O,\;AgNO_3$ 300 mL per activated carbon 50 g. Physical and chemical properties of the metal impregnated activated carbons were measured using specific surface area, pore volume and size distribution, scanning eletron microscope(SEM), adsorption isotherm. When activated carbon was treated with acid, the quantity of impregnated metal increased about 1.3 times since the micropores were converted to mesopores or macropores. Both the physical absorption by micropores and chemical absorption by metal ions could be achieved simultaneously with the metal impregnated activated carbon because the capacity of micro pores did not change even after metal ions were impregnated.

• 보존과학연구
• /
• s.10
• /
• pp.1-40
• /
• 1989

Between 1976 and 1984 approximately 26.7 tons of Chinese coins were recovered from a shipwreck which was found at the seabed of the Shin an area in the south-western coast of the Korean peninsula. Elements, Cu, Pb, Sn, Fe, Sb, As, Zn, Ag, Ni, Co and Mn, of 54 pieces of the coins were determined by Inductively Coupled Plasma Atomic Emission Spectroscopy(ICP-AIS). The result shows that Ch, Pb, and Sn were found to be major elements roughly the coins with the ratio of 7 : 2 : 1, respectively. Trace elements were classified into 3 levels according to the avarage concentration : Fe,As and Sb(0.1-0.5%), Ag, Mi, Co and Zn(100-1000ppm) and Mn(10ppm). Some systematic tendencies are observed in the composition change with a function of their minting ages .The Wuzhu coins(오수전) from the Eastern Han dynasty(A.D.25-219 )are much more abundant in Cu than the coins of Tang dynasty(A.D.618-907) and later periods. Major element compositions of the Kai -tong Vuan-Bao(개통원보) coins from the Tang dynasty, were remarkably variable. In general, however, the Tang dynasty coins were much more abundant in Cu than the Song dynasty(A.S.S60-1279) coins. The amount of major elements Cu and Sn decreases while that of Pb in creasesby passage of age from the Bei Song dynasty(A.D.960-1127) to later Nam Song dynasty (A.D.1127-1279 ). It means that the quality of coins mere degraded. The amounts of trace elemends(Fe, As, Co, Hn) increases with the above age. High amounts of trace elements are supposed to be a reflection of immaturity of minting techniques or use of impurity-rich raw materials. The Jin dynasty(A.D.1125-1234) coins are found to be rich in Sn and thus contain Pb as the third component. It is quite different from the coins of the Song dynasty. The Zhi-dai Tong-Bao(지대통보) coins of the Yuan dynasty from A.0.1310 are much more abundant in Cu and Sn than those of the Nam Song dynasty .

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.100-100
• /
• 2011

Nanomaterial architecture with highly ordered, vertically oriented $TiO_2$ nanotube arrays shows a good promise for diverse technological applications. As inspired from the literature reports that Nickel modification can improve the photocatalytic activity of $TiO_2$, it was planned to coat Ni into the $TiO_2$ matrix. In this study, first $TiO_2$ nanotubes(TiNTs) were prepared by anodization (60V,3min) in HF-free aqueous electrolyte on ultrasonically cleaned polished titanium sheet substrates ($1{\times}7cm^2$). The typical thickness of the sintered TiNT ($500^{\circ}C$for10min) was ~1 micronas confirmed from the FESEM study. In the next part, as-anodized and sintered TiNT/Ti photoanodes were used to coat Ni by AC electrodeposition from aqueous 0.1M nickel sulphate solution. During AC electrodeposition, conditions such as 1V DC offset voltage, 9V amplitude (peak-to-peak) and 750 Hz frequency were fixed constant and the deposition time was varied as 0.5 min, 1 min, 2 min and 10 min. The photoelectrochemical performance of pristine and Ni modified TiNT/Ti photoanodes was measured in 1N NaOH electrolyte under 1 SUN illumination in the potential range of -1V and 1.2V versus Ag/AgCl reference electrode. The photocurrent performance of TiNT/Ti photoanode decreased upon Ni modification and the results were confirmed after repeated experiments. This suggests us that Ni modification inhibits the photoelectrochemical performance of $TiO_2$ nanotubes.

• Journal of the Korean Ceramic Society
• /
• v.55 no.5
• /
• pp.492-497
• /
• 2018

This paper reports the efficacy of tape casting using an Ag-10 wt% CuO filler for the successful joining of a sintered $Ce_{0.9}Gd_{0.1}O_{2-{\delta}}-La_{0.7}Sr_{0.3}MnO_{3{\pm}{\delta}}$ (GDC-LSM) ceramic with a SUS 460 FC metal alloy by reactive air brazing. The as-prepared green tape was highly flexible without drying cracks, and the handling was easy when used as a filler material for reactive air brazing. Heat treatment for the GDC-LSM/SUS 460 FC joint was performed at $1050^{\circ}C$ for 30 min in air. Microstructural observations indicated a reliable and compact joining. The room temperature mechanical shear strength of the as-brazed joints was $60{\pm}8MPa$ with a cohesive failure. The flexural strength of joints was measured from room temperature up to $850^{\circ}C$, where the strength retention revealed to be almost 100% at $500^{\circ}C$. However, the joints showed a degradation in strengths at 800 and $850^{\circ}C$, exhibiting strength retentions of 57% and 37%, respectively.

• Journal of Surface Science and Engineering
• /
• v.48 no.3
• /
• pp.121-125
• /
• 2015

We studied the blue fluorescent OLED with Mg:Ag, Al, Ni as anode materials. Blue fluorescent OLEDs were fabricated using Anode / $MoO_3$ (3 nm) / 2-TNATA (60 nm) / NPB (30 nm) / SH-1 : BD-2 (5 vol.%, 30 nm) / Bphen (40 nm) / Liq (1 nm) / Al (150 nm). Current density of OLED with Mg:Ag was not measured due to too low work function, and that of OLED with Al showed $45.2mA/cm^2$ at 12 V. Luminance and Current efficiency of OLED with Al showed $385.1cd/m^2$ and 0.9 cd/A. Current density of OLED with Ni of 8, 10, 12 nm thickness showed 10, 12.9, $37.2mA/cm^2$, respectively. Luminance and Current efficiency of OLED with Ni of 8, 10, 12 nm thickness showed 670.9, 991.2, $1,320cd/m^2$ and 6.7, 7.7, 3.6 cd/A, respectively. Transmittance of Al was 52.2% at 476 nm wavelength and that of Ni of 8, 10, 12 nm thickness was 79, 77, 74 %, respectively. In spite of best current density, OLED with Al showed the lowest luminance and current efficiency because of low work function and poor transmittance. When thickness of Ni was increased to 12nm, current efficiency was sharply lower owing to bad transmittance and unbalance of holes and electrons. Finally, OLED with Ni of 10 nm thicknes showed the highest current efficiency.