• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.411-417
• /
• 2005

Surface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern using photolithography on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions from based on friction map. Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

• Journal of Ecology and Environment
• /
• 제31권1호
• /
• pp.83-87
• /
• 2008

The small-scale dynamic of moth populations in spring was examined in a coniferous forest of southwestern Korea. Moths were collected with one 22-watt light trap for 29 days in April 2007. A total of 450 individuals of 38 species in 5 families were collected. The most abundant species was an epiplemid moth, Epiplema plagifera. The relationship between these dominant moths and their host plants is briefly discussed. We also examined influence of weather factors on the number of species and individuals collected. Multiple regression analyses showed that the two-day temperature difference explained 18% of the variance in the number of species collected, while air and ground temperatures explained 51% of the variance in the log-transformed number of individuals collected. This suggests that temperature affects local population sizes in spring, but variables other than weather may also affect the diversity of local moth populations.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.61-68
• /
• 2004

A non-contact precision measurement system is a theodolite system, a laser tacker and a photogrammetry system etc. Nowadays, the system reaches to a limit of measurement accuracy required from industrial product of middle and large scale. The one of the solutions for this problem is to maximize the accuracy of the existing measurement system. According to it we performed the study far a measurement accuracy of theodolite system when the distance between two theodolites is changed 1m to 5m. We could blow that the changes of distance affect the measurement accuracy of theodolite system and that the maximum measurement accuracy is $\pm$ 0.02 mm on theodolite distance 3∼4 m.

• 한국의류산업학회지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2010

A purpose of this study was to find out how the casual and formal style clothes of stripe pattern giving variety by pattern direction, pattern width, and contrast coloration have an effect on image of wearers. 432 stimuli were made and 2,800 testee evaluated them using semantic differential scale. As a result, five image dimensions were drawn as a factor of attractiveness, activeness, gracefulness, visibility, and tenderness. In consequence of analysing the image difference by stripe pattern and clothing style, the stripe pattern and clothing style affect image presentation as a significant clue. And besides, as a result of positioning stimuli by image, pattern direction, coloration, and tone combination were important clues that decide image. Consequently, clothing style, stripe pattern, and contrast coloration were made clear as an efficient parameter in image presentation of clothing wearers.

• KIEAE Journal
• /
• 제2권3호
• /
• pp.11-16
• /
• 2002

Indoor air environment is one of the most important factors that affect resident's health and comfort level. In this paper, the influence of ventilation efficiency with different types of furniture arrangement at breathing zone in a room was analyzed by numerical simulation based on computational fluid dynamics(CFD). The furniture layout of students' bedroom have been classified by three different patterns so that SVE3(scale for ventilation efficiency3) in the rooms was analyzed for air flow distribution. According to the results of the study, SVE3 has the maximum value in spaces between furnitures and each comer of the room. The furniture arrangement influences the ventilation efficiency. It was con finned that ventilation effective in a room is not uniformly distributed as compared the breathing zone with all the area in a room. It means that a study of ventilation efficiency was considered relatively with target zone(a residential or breathing zone) and all the area in a space.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.981-988
• /
• 2018

An experiment was performed for the OECD/NEA ROSA-2 Project with the large-scale test facility (LSTF), which simulated a steam generator tube rupture (SGTR) accident due to a double-ended guillotine break of one of steam generator (SG) U-tubes with operator recovery actions in a pressurized water reactor. The relief valve of broken SG opened three times after the start of intact SG secondary-side depressurization as the recovery action. Multi-dimensional phenomena specific to the SGTR accident appeared such as significant thermal stratification in a cold leg in broken loop especially during the operation of high-pressure injection (HPI) system. The RELAP5/MOD3.3 code overpredicted the broken SG secondary-side pressure after the start of the intact SG secondary-side depressurization, and failed to calculate the cold leg fluid temperature in broken loop. The combination of the number of the ruptured SG tubes and the HPI system operation difference was found to significantly affect the primary and SG secondary-side pressures through sensitivity analyses with the RELAP5 code.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.126-137
• /
• 1994

Performance management of computer networks is intended to improve a given network performance in order for more efficient information exchange between subsystems of an integrated large-scale system. Importance of perfomance management is growing as many functions of the large- scale system depend on the quality of communication services provided by the network. The role of performance management is to manipulate the adjustable protocol parameters on line so that the network can adapt itself to a dynamic environment. This can be divided into two subtasks : performance evaluation to find how changes in protocol parameters affect the network performance and decision making to determine the magnitude and direction of parameter adjustment. This paper is the first part of the two papers focusing on conceptual design, development, and evaluation of performance management for token bus networks. This paper specifically deals with the task of performance evaluation which utilizes the principle of perturbation analysis of discrete event dynamic systems. The developed algorithm can estimate the network performance under a perturbed protocol parameter setting from observations of the network operations under a nominal parameter setting.

• Journal of Information Processing Systems
• /
• 제13권5호
• /
• pp.1149-1157
• /
• 2017

The satisfiability problem is always a core problem in artificial intelligence (AI). And how to improve the efficiency of algorithms solving the satisfiability problem is widely concerned. Algorithm IER (Improved Extension Rule) is based on extension rule. The number of atoms and the number of clauses affect the efficiency of the algorithm IER. DPLL rules are helpful to reduce these numbers. Then a complete algorithm CIER based on splitting rule and extension rule is proposed in this paper in order to improve the efficiency. At first, the algorithm CIER (Complete Improved Extension Rule) reduces the scale of a clause set with DPLL rules. Then, the clause set is split into a group of small clause sets. In the end, the satisfiability of the clause set is got from these small clause sets'. A strategy MOAMD (maximum occurrences and maximum difference) for the algorithm CIER is given. With this strategy, a better arrangement of atoms could be got. This arrangement could make the number of small clause sets fewer and the scale of these sets smaller. So, the algorithm CIER will be more efficient.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.57-62
• /
• 1998

This study is intended to analyze how formations affect the tensile and tear strengths of paper at the same basis weight. Light transmitance method using a scanner was employed to measure the degree of formation in terms of gray scale. Scanning method showed close relationship between gray scale value and basis weight. At the same basis weight a sheet of paper with good formation had higher tensile strength in terms of breaking length than that of a paper with poor formation. There was little difference in tear strength depending on formations.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.133-142
• /
• 2019

In the present study, microstructure-dependent static stability analysis of inhomogeneous tapered micro-columns is performed. It is considered that the micro column is made of functionally graded materials and has a variable cross-section. The material and geometrical properties of micro column vary continuously throughout the axial direction. Euler-Bernoulli beam and modified couple stress theories are used to model the nonhomogeneous micro column with variable cross section. Rayleigh-Ritz solution method is implemented to obtain the critical buckling loads for various parameters. A detailed parametric study is performed to examine the influences of taper ratio, material gradation, length scale parameter, and boundary conditions. The validity of the present results is demonstrated by comparing them with some related results available in the literature. It can be emphasized that the size-dependency on the critical buckling loads is more prominent for bigger length scale parameter-to-thickness ratio and changes in the material gradation and taper ratio affect significantly the values of critical buckling loads.