• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.71-80
• /
• 2007

This paper describes an efficient hardware design of WiBro security processor (WBSec) supporting for the security sub-layer of WiBro wireless internet system. The WBSec processor, which is based on AES (Advanced Encryption Standard) block cipher algorithm, performs data oncryption/decryption, authentication/integrity, and key encryption/decryption for packet data protection of wireless network. It carries out the modes of ECB, CTR, CBC, CCM and key wrap/unwrap with two AES cores working in parallel. In order to achieve an area-efficient implementation, two design techniques are considered; First, round transformation block within AES core is designed using a shared structure for encryption/decryption. Secondly, SubByte/InvSubByte blocks that require the largest hardware in AES core are implemented using field transformation technique. It results that the gate count of WBSec is reduced by about 25% compared with conventional LUT (Look-Up Table)-based design. The WBSec processor designed in Verilog-HDL has about 22,350 gates, and the estimated throughput is about 16-Mbps at key wrap mode and maximum 213-Mbps at CCM mode, thus it can be used for hardware design of WiBro security system.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.129-134
• /
• 2023

The greatest challenge of this century is the protection of stored and transmitted data over the network. This paper provides a new hybrid algorithm designed based on combination algorithms, in the proposed algorithm combined with Hill and the Advanced Encryption Standard Algorithms, to increase the efficiency of color image encryption and increase the sensitivity of the key to protect the RGB image from Keyes attackers. The proposed algorithm has proven its efficiency in encryption of color images with high security and countering attacks. The strength and efficiency of combination the Hill Chipper and Advanced Encryption Standard Algorithms tested by statical analysis for RGB images histogram and correlation of RGB images before and after encryption using hill cipher and proposed algorithm and also analysis of the secret key and key space to protect the RGB image from Brute force attack. The result of combining Hill and Advanced Encryption Standard Algorithm achieved the ability to cope statistically

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.2
• /
• pp.457-465
• /
• 2015

Internet of Things(IoT) technologies should be able to communication with various embedded platforms. We will need to select an appropriate cryptographic algorithm in various embedded environments because we should consider security elements in IoT communications. Therefore the lightweight block cryptographic algorithm is essential for secure communication between these kinds of embedded platforms. However, the lightweight block cryptographic algorithm has a vulnerability which can be leaked in side channel analysis. Thus we also have to consider side channel countermeasure. In this paper, we will propose the scenario of side channel analysis and confirm the vulnerability for HIGHT algorithm which is composed of ARX structure. Additionally, we will suggest countermeasure for HIGHT against side channel analysis. Finally, we will explain how much the effectiveness can be provided through comparison between countermeasure for AES and HIGHT.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.485-487
• /
• 2017

The whirlpool hash function adopted as an ISO / IEC standard 10118-3 by the international standardization organization is an algorithm that provides message integrity based on an SPN (Substitution Permutation Network) structure similar to AES block cipher. In this paper, we describe the hardware implementation of the Whirlpool hash function. The round block is designed with a 64-bit data path and encryption is performed over 10 rounds. To minimize area, key expansion and encryption algorithms use the same hardware. The Whirlpool hash function was modeled using Verilog HDL, and simulation was performed with ModelSim to verify normal operation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.219-222
• /
• 2000

본 논문에서는 미국 국립표준기술연구소의 AES 개발과제 추진일정 제 2라운드에서 선정된 다섯 개의 128비트 암호 알고리듬 중에서 RC6 암호 알고리듬에 대해 ALTERA FPGA를 사용하여 하드웨어로 구현한다. RC6 암호 알고리듬을 하드웨어로 구현하는 과정에서, 키 스케줄링을 포함한 경우와 포함하지 않는 경우에 대하여 각각의 모듈에 대한 구현 방법을 기술하고, 구현된 각각의 코어가 각각 5.37MHz와 5.18MHz로 동작하며, 22개의 클럭을 사용하여 암호/복호화가 완료됨을 보여준다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.33-43
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm "Rijndael". To achieve high throughput rate, a sub-pipeline stage is inserted into a round transformation block, resulting that two consecutive round functions are simultaneously operated. For area-efficient and low-power implementation, the round transformation block is designed to share the hardware resources for encryption and decryption. An efficient on-the-fly key scheduler is devised to supports the three master-key lengths of 128-b/192-b/256-b, and it generates round keys in the first sub-pipeline stage of each round processing. The Verilog-HDL model of the cryptoprocessor was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}m$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.1
• /
• pp.13-23
• /
• 2001

This paper implemented into hardware SEED which is the KOREA standard 128-bit block cipher. First, at the respect of hardware implementation, we compared and analyzed SEED with AES finalist algorithms - MARS, RC6, RIJNDAEL, SERPENT, TWOFISH, which are secret key block encryption algorithms. The encryption of SEED is faster than MARS, RC6, TWOFISH, but is as five times slow as RIJNDAEL which is the fastest. We propose a SEED hardware architecture which improves the encryption speed. We divided one round into three parts, J1 function block, J2 function block J3 function block including key mixing block, because SEED repeatedly executes the same operation 16 times, then we pipelined one round into three parts, J1 function block, J2 function block, J3 function block including key mixing block, because SEED repeatedly executes the same operation 16 times, then we pipelined it to make it more faster. G-function is implemented more easily by xoring four extended 4 byte SS-boxes. We tested it using ALTERA FPGA with Verilog HDL. If the design is synthesized with 0.5 um Samsung standard cell library, encryption of ECB and decryption of ECB, CBC, CFB, which can be pipelined would take 50 clock cycles to encrypt 384-bit plaintext, and hence we have 745.6 Mbps assuming 97.1 MHz clock frequency. Encryption of CBC, OFB, CFB and decryption of OFB, which cannot be pipelined have 258.9 Mbps under same condition.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.80-88
• /
• 2008

In this paper, the block cipher algorithms, 3-DES(Triple Data Encryption Standard), AES(Advanced Encryption Standard), SEED, HASH(SHA-1), which are domestic and international standards, have been implemented as an integrated cryptographic engine for smart card applications. For small area and low power design which are essential requirements for portable devices, arithmetic resources are shared for iteration steps in each algorithm, and a two-level clock gating technique was used to reduce the dynamic power consumption. The integrated cryptographic engine was verified with ALTERA Excalbur EPXA10F1020C device, requiring 7,729 LEs(Logic Elements) and 512 Bytes ROM, and its maximum clock speed was 24.83 MHz. When designed by using Samsung 0.18 um STD130 standard cell library, the engine consisted of 44,452 gates and had up to 50 MHz operation clock speed. It was estimated to consume 2.96 mW, 3.03 mW, 2.63 mW, 7.06 mW power at 3-DES, AES, SEED, SHA-1 modes respectively when operating at 25 MHz clock. We found that it has better area-power optimized structure than other existing designs for smart cards and various embedded security systems.

• Journal of Korea Multimedia Society
• /
• v.20 no.12
• /
• pp.1913-1927
• /
• 2017

Encryption technology is to hide information in a cyberspace built using a computer and to prevent third parties from changing it. If a malicious user accesses unauthorized device or application services on the Internet of objects, it may be exposed to various security threats such as data leakage, denial of service, and privacy violation. One way to deal with these security threats is to encrypt and deliver the data generated by a user. Encrypting data must be referred to a technique of changing data using a complicated algorithm so that no one else knows the content except for those with special knowledge. As computers process computations that can be done at a very high speed, current cryptographic techniques are vulnerable to future computer performance improvements. We designed and implemented a new encryption program that combines ancient and modern cryptography so that the user never knows about data management, and transmission. The significance of this paper is that it is the safest method to combine various kinds of encryption methods to secure the weaknesses of the used cryptographic algorithms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.56-64
• /
• 2012

A smart grid is the next generation power grid which combines the existing power grid with information technology, so an energy efficient power grid can be provided. In this paper, in order to build an efficient smart grid an AMI system, which gears with the existing home network and provides an user friendly management function, is proposed. The proposed AMI system, which is based on an extended home network, consists of various functional units; smart meters, communication modules, home gateway, security modules, meter data management modules (MDMM), electric power application modules and so on. The proposed home network system, which can reduce electric power consumption and transmit data more effectively, is designed by using IEEE 802.15.4. The extended home gateway can exchange energy consumption information with the outside management system via web services. The proposed AMI system is designed to enable two-way communication between the home gateway and MDMM via the Internet. The AES(Advanced Encryption Standard) algorithm, which is a symmetric block cipher algorithm, is used to ensure secure information exchange. Even though the results in this study could be limited to our experimental environment, the result of the simulation test shows that the proposed system reduces electric power consumption by 4~42% on average compared to the case of using no control.