• Journal of Oral Medicine and Pain
• /
• 제45권4호
• /
• pp.89-96
• /
• 2020

Purpose: To investigate the expression of malondialdehyde (MDA), lipid peroxidation marker for oxidative stress (OS), in autoimmune Sjögren's syndrome (SjS) by utilizing the SjS-prone C57BL/6.NOD-Aec1Aec2 (B6DC) mouse and the SjS patient plasma samples. Methods: The MDA concentrations in the lysates of the submandibular gland, liver, and serum samples from the SjS-prone B6DC mouse model were compared with those from the C57BL/6J as a control. A thiobarbituric acid reactive substance (TBARS) assay kit was used to measure MDA. Plasma samples from five SjS patients and five control subjects were also evaluated. Results: The MDA concentrations in experimental animals and controls were not significantly different. There were no significant differences between the plasma of SjS patients and of controls. Conclusions: The expression of MDA was investigated in the organs from the SjS-prone B6DC mouse for the first time and in the plasma samples of SjS patients. No significant differences were observed between SjS and control samples when MDA was the target molecule with the TBARS assay. MDA may not be a reliable marker to measure OS contrary to the published studies involving OS of SjS.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권3호
• /
• pp.173-181
• /
• 2021

The purpose of this study was to reduce dose while maintaining image quality during digital radiographic examination of paranasal sinus by using the automatic exposure control (AEC) system. The tube voltage was set as six stages that increased by about 10 kVp to 70 kVp, 81 kVp, 90 kVp, 102 kVp, 109 kVp and 117 kVp. And then the AEC system conditions were consisted of 9 setting environments, that change mode of the sensitivity (S200, S400, S800) and the density (+2.5, 0, -2.5). We measured automatically exposed tube current (mAs) under 54 conditions with combined these, and assessed SNR and PSNR through the acquired images. In addition, four radiologists performed a qualitative assessment of the acquired images for each combination on a five-point scale of the Likert. As a result, the lowest dose and the highest values of SNR and PSNR in images with a qualitative assessment more than 4 point were the AEC control factors of 90 kVp, S800, D2.5. We applied this condition to the clinical trial, it showed an effect of 83.1% reduction in exposure radiation dose (mR). Therefore, AEC system could be used as dose reduction technology if it understood and used related regulatory factors and physical characteristics.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권1호
• /
• pp.1-8
• /
• 2021

The purpose of this study was to analyze the effect of automatic exposure control (AEC) control factors in digital radiography systems based on the fine contrast images using coin phantoms. The AEC control factors were targeted at the range of dominent zone, sensitivity, and density. The dominent zone was divided into cases where a single coin was used to cover the field configuration, and cases where seven coins were used to cover the field configuration. The sensitivity was classified into three stages (200, 400, 800) and the density was classified into three stages (2.5, 0, 2.5). Image quality was evaluated by signal to noise ratio (SNR) and contrast to noise ratio (CNR). Then, the automatically exposed tube current was measured. As a result, the X-ray image of seven coins obtained a result value of about 1.2 times higher for SNR and 1.9 times higher for CNR than the X-ray image for one coin. The tube current was also about 1.6 times higher. In conclusion, In AEC, the higher the field configuration and dominent zone are matched and the higher the density, the lower the sensitivity, which increases the tube current and CNR, which increases the image quality. Therefore, it is judged that the appropriate setting of the range of dominent zone, sensitivity, and density of the control, which is the AEC control factor, could improve the fine contrast of images.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권1호
• /
• pp.39-46
• /
• 2021

This study confirmed the usefulness of the copper filter according to the mode change by comparing and analyzing the energy change according to the application of the copper filter and the change in effective dose and image quality according to the distance to the subject in the DR(Digital Radiography) system. The average energy increased when the copper filter was applied and the reduction rate by 50% of mAs was increased as the thickness of the copper filter increased according to the application of the 10 kVp rule in AEC mode. The effective dose decreased as the thickness increased when the copper filter was applied in AEC(Automatic Exposure Control) mode and manual mode according to the application of the 10 kVp rule, and the decrease rate decreased with increasing 10 kVp increments. As a result of analyzing the dicom images for AEC mode and manual mode with Image J. the PSNR(Peak Signal to Noise Ratio) values were approximate values of less than 30 dB for each mode and for each copper filter thickness. When the copper filter was applied, the average energy increased, so when the 10 kVp rule was applied, the mAs for each mode could be reduced, and the effective dose could also be reduced. However, as the distance and tube voltage increased, the reduction rate of mAs decreased, and the quality of the image was found to decrease when the copper filter was applied, but there was no difference in quality of the image when the copper filter thickness increased.

• 한국방사선학회논문지
• /
• 제17권6호
• /
• pp.903-909
• /
• 2023

본 연구는 자동노출제어장치를 이용한 흉부 측방향 검사 시에 환자의 중심위치 변화가 주변 장기의 피폭선량과 화질에 미치는 영향을 탐구하는데 목적이 있다. 실험은 인체모형팬텀을 대상으로 하였다. 바늘침을 팬텀의 관상선 중심 하단부에 부착하였고, 납 자를 검출기 하단부에 부착하여, 50 cm 지점이 AEC 이온챔버의 중앙 하단부에 위치하도록 하였다. 조사조건은 125 kVp, 320 mA, 초점-영상검출기간 거리는 180 cm, 조사야 크기는 14×17 inch를 사용하였다. AEC 이온 챔버는 중앙-하단 1개만 사용했고, Sensitivity 'Middle', Density '0' 으로 설정하여, 중심 X선은 6번째 흉추를 향해 수직입사 하였다. AEC mode를 적용한 상태에서 바늘침과 납 자의 50 cm 지점이 일치되게 위치시킨 후 팬텀을 배 쪽으로 5 cm (F5), 등 쪽으로 5 cm (B5) 씩 이동시킨 후 ESD를 측정하여 선량 인자를 분석하였다. 환자 중심위치 변화에 따른 갑상선의 ESD는 Center의 경우 232.60±2.20 μGy, F5는 231.22±1.53 μGy, B5는 184.37±1.19 μGy로 나타났으며, 유방의 ESD는 Center의 경우 288.54±3.03 μGy, F5는 260.97±1.93 μGy, B5는 229.80±1.62 μGy, 폐 중심부의 ESD는 Center의 경우 337.02±3.25 μGy, F5는 336.09±2.29 μGy, B5는 261.76±1.68 μGy 로 나타났다. 선량 인자의 각 그룹 간 평균값의 차이를 비교한 결과 통계적으로 유의한 차이가 나타났으며(p<0.01), 각각 독립적인 그룹으로 나타났다. 연구의 결과, 환자 중심위치 변화에 따른 갑상선, 유방, 폐 중심부의 선량의 차이는 환자가 전방 5 cm 정도의 움직임에서는 유방(10%)를 제외한 장기에서는 큰 차이가 없었으나, 후방 5 cm 정도의 움직임에서는 각 부위에서 평균 23.7%의 선량 감소를 나타냈다. 또한, 환자 중심위치가 후방으로 이동 시 화질의 저하가 나타났다.

• 한국방사선학회논문지
• /
• 제17권7호
• /
• pp.1149-1155
• /
• 2023

본 연구에서는 Sub ROI의 변화가 노출지수(exposure index; EI)에 미치는 영향을 알아보고, 임상에서 Sub ROI 변경 시 발생될 수 있는 EI값의 변화에 대한 지표를 제시하고자 한다. 본 연구는 복부 방사선검사와 유사한 설정을 위해, 아크릴 20 cm의 피사체를 대상으로 진행하였고, 아크릴 한 장의 제원은 20×20×5 cm이다. 조사조건은 80 kVp , 320 mA, 25 ms, SID 110 cm로 동일하게 적용하였으며, Sub ROI는 장비사에서 제공하는 5가지 type을 이용하여 각 type별 30개의 영상을 획득하였고, 장비에서 제공하는 EI값과 환자입사선량(entrance skin exposure; ESE)를 비교분석 하였다. Sub ROI 변화에 따른 EI의 평균값은 LS의 경우 101.18±0.27 이었으며, AEC는 106.57±0.31, VR은 107.74±0.39, HR은 107.90±0.38, SS는 109.72±0.32로 나타났다(p<0.01). Sub ROI 타입 별(LS, AEC, VR, HR, SS) ESE 평균값은 476.45±1.71 μGy, 476.92±1.48 μGy, 476.14±2.30 μGy, 475.61±1.96 μGy, 477.14±1.46 μGy로 측정되었고, 통계적으로 유의한 차이가 있었다(p<0.01). 본 연구결과 Sub ROI 타입에 따른 EI는 최소값을 나타낸 LS(109.72)를 기준으로, AEC는 5.3%, VR은 6.4%, HR은 6.6%, SS는 8.4% 증가하였으며, 평균적으로 5.3% 증가하였다. ESE의 평균값은 HR(475.61 μGy)타입이 최소값을 나타냈으며, 이를 기준으로 AEC는 0.27%, VR은 0.11%, LS는 0.17%, SS는 0.32% 증가하였고, 전체 적으로 약 0.17% 높아졌다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.40-43
• /
• 2003

The phase transformation, variation of secondary phase, and critical current density $(J_c) for (Bi,Pb)_2Sr_2Ca_2Cu_3O_10 (2223)$ tapes have been studied through the thermal slide heat treatment (TSHT) process. This process consists of a multiple variations of oxygen partial pressures and temperatures at the initial heat treatment During the initial heat treatment some secondary phase such as $(Ca,Sr)_2CuO_3(2/1 AEC), (Ca,Sr)_{14}Cu_{24}O_{41} (14/24 AEC), and (Bi,Pb)_2Sr_2CuO_y$(2201, amorphous phase) farm in Bi-2223 tapes, especially at the 2223 grain boundaries. These secondary phases are detrimental to the phase transformation and final properties. In order to control the secondary phase in Bi-2223 tapes the amount and size of secondary phases among the TSHT process were observed. The results indicate that the amount and particle size of AEC particles were smaller when the TSHT process was used than when the normal process at the initial heat treatment was used which results in the improved $J_c$ properties after the final process.

• 동아시아경상학회지
• /
• 제5권3호
• /
• pp.33-40
• /
• 2017

Purpose - This paper suggests approaching methods for a way of strategies for traditional market extend and new ebusiness, market development, and plan of new product in the future and develop a way of method for cooperation through analysis on the smart phone market trend in different culture, effectively. Research design, data, methodology - As research design, data, and methodology, this paper suggests new idea and approaches from comparing characteristics analysis of smart phone market in different culture in AEC. This paper takes data to analysis from ITU, World Bank, AEC, and IMF. These organizer's data can be trusted as official society in the world. This paper can prove market and the characteristics of society through the corresponding results. Results - This paper can suggest the novel idea on market development and the big possibility depend on ACE country and can describe the possibility on new market because of low smart phone market penetration and low digital market penetration. Conclusions - This paper concludes to develop e-business, culture friendly ship, linking with education, development of appropriate technology depend on country, and should develop new strategy for market extend to low penetration.

• International Journal of Advanced Culture Technology
• /
• 제10권2호
• /
• pp.201-212
• /
• 2022

With the development of sequencing technology, there is a need for technology to predict the function of the protein sequence. Enzyme Commission (EC) numbers are becoming markers that distinguish the function of the sequence. In particular, many researchers are researching various methods of predicting the EC numbers of protein sequences based on deep learning. However, as studies using various methods exist, a problem arises, in which the exact prediction result of the sequence is unknown. To solve this problem, this paper proposes an All Enzyme Commission (AEC) algorithm. The proposed AEC is an algorithm that executes various prediction methods and integrates the results when predicting sequences. This algorithm uses duplicates to give more weights when duplicate values are obtained from multiple methods. The largest value, among the final prediction result values for each method to which the weight is applied, is the final prediction result. Moreover, for the convenience of researchers, the proposed algorithm is provided through the AllEC web services. They can use the algorithms regardless of the operating systems, installation, or operating environment.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.616-623
• /
• 2013

One of the oldest, most common engineering problems is measuring the dimensions of different objects and the distances between locations. In AEC/FM, related uses vary from large-scale applications such as measuring distances between cities to small-scale applications such as measuring the depth of a crack or the width of a welded joint. Within the last few years, advances in applying new technologies have prompted the development of new measuring devices such as ultrasound and laser-based measurers. Because of wide varieties in type, associated costs, and levels of accuracy, the selection of an optimal measuring technology is challenging for construction engineers and facility managers. To tackle this issue, we present an overview of various measuring technologies adopted by experts in the area of AEC/FM. As the next step, to evaluate the performance of these technologies, we select one indoor and one outdoor case and measure several dimensions using six categories of technologies: tapes, total stations, laser measurers, ultrasound devices, laser scanners, and image-based technologies. Then we evaluate the results according to various metrics such as accuracy, ease of use, operation time, associated costs, compare these results, and recommend optimal technologies for specific applications. The results also revealed that in most applications, computer vision-based technologies outperform traditional devices in terms of ease of use, associated costs, and accuracy.