• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1018-1021
• /
• 2003

A scratch tester was developed to evaluate the adhesive strength at interface between thin film and substrate(silicon wafer). Under force control, the scratch tester can measure the normal and the horizontal forces simultaneously as the probe tip of the equipment approaches to the interface between thin film and substrate of wafer. The capacity of each component of force sensor is 0.1 N ∼ 100 N. In addition, the tester can detect the signal of elastic wave from AE sensor(frequency range of 900 kHz) attached to the probe tip and evaluate the bonding strength of interface. Using the developed scratch tester. the feasibility test was performed to evaluate the adhesive strength of semiconductor wafer.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.288-289
• /
• 2015

EMS(Energy Management System: 에너지 관리 시스템)에서 SCADA(Supervisory Control and Data Acquisition: 집중원격감시 시스템)은 RTU(Remote Terminal Unit), RCC(Remote Control Centre) 등을 통해 데이터를 취득한다. 이렇게 취득된 데이터는 토폴로지(Topology)를 구성하고, 계통을 감시하고 해석하는데 사용된다. EMS에서 계통해석 기술은 발전, 송전, 변전, 배전 계통이 유기적으로 결합되어 원활한 전력의 공급과 높은 신뢰도를 제공할 수 있어야 하는데 이를 위해서는 항상 신뢰할 수 있는 데이터를 사용해야 한다. 하지만 SCADA 취득 데이터는 통신 선로 상의 지연 등 통신 오류를 포함하고 있기 때문에 항상 신뢰할 수는 없으며, 오차를 포함한 측정 데이터를 사용하여 계통 해석을 할 경우 계통 해석 결과 전체를 신뢰할 수 없게 된다는 문제점이 있다. 본 논문에서는 원격 장치 신호 품질 불량 시 계통해석 데이터를 보다 신뢰할 수 있도록 취득, 사용하는 방안에 대해 제안한다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.42-45
• /
• 2003

Optical fiber vibrations sensors (OFVSs) and extrinsic Fabry-Perot interferometer (EFPI) were used in damage monitoring of fiber-metal laminates(FML). The optical fiber vibration sensor and EFPI were applied in order to detect and evaluate the strain, damage and failure of FML. Damages in composites, such as matrix cracks, delamination and fiber breakage may occur as a result of excessive load, fatigue and low-velocity impacts. Indentation test was performed with the measurement of optical signal and acoustic emission (AE). The signals of the optical fiber vibration sensor due to damages were quantitatively evaluated by wavelet transform. It was found that damage information of comparable in quality to acoustic emission data could be obtained from the optical fiber vibration sensor signals.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1448-1452
• /
• 2003

A scratch tester was developed to evaluate the adhesive strength at interface between thin-film and substrate(silicon wafer). Under force control, the scratch tester can measure the normal and the tangential forces simultaneously as the probe tip of the equipment approaches to the interface between thin-film and substrate of wafer. The capacity of each component of force sensor is 0.1 N ${\sim}$ 100 N. In addition, the tester can detect the signal of elastic wave from AE sensor(frequency range of 900 kHz) attached to the probe tip and evaluate the bonding strength of interface. Using the developed scratch tester, the feasibility test was performed to evaluate the adhesive strength of thin-film.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.208-213
• /
• 2001

High speed milling(HSM) is one of the emerging cutting process having tremendous potential not only in increased metal removal rates but also in improved surface finish, burr free edge, dimensional accuracy and a virtually stress free component after machining. The High efficiency and accuracy in machining of die/mold materials can be obtained in high speed machining, so it is necessary to analytic the mechanism of high speed cutting process : cutting force, acoustic emission signal.

• Journal of Sensor Science and Technology
• /
• v.14 no.3
• /
• pp.169-179
• /
• 2005

A multiplexed bend loss type single-mode fiber-optic sensor system was prepared to measure the displacement of several cm of the civil engineering structures such as many bridges, tunnels and various buildings. This bend loss type fiber-optic sensor used the signal difference between two reflection signals due to various bend losses generating at a pair of optical connectors by using OTDR (optical time domain reflectometer) for measuring displacements. And the experiments were conducted for showing the measurement feasibility on the range of 10 cm, and the multiplexing experiments were also performed to measure the displacements of 5 measuring positions of an object by setting these 5 fiber-optic sensors on a single mode fiber simultaneously.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2145-2152
• /
• 2016

Internet generalization has led to increased demands for Internet banking. Various security programs to protect authentication information are being developed; however, these programs cannot protect the wireless communication sections of wireless keyboards. In particular, vulnerabilities have been reported in the radio communication sections of 27 MHz wireless keyboards. In this paper, we explain how to analyze M's 27 MHz wireless keyboard. We also experimentally show that an attacker can acquire authentication information during domestic Internet banking using a 27 MHz wireless keyboard. To do this, we set up an experimental encironment to analyze the electromagnetic signal of a 27 MHz wireless keyboard.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.234-237
• /
• 2017

This study is aimed to optimize a location of region of interest (ROI) in test bolus carotid contrast enhanced magnetic resonance angiography (CE-MRA) at 3.0T. A total of consecutive 270 patients with no cardiovascular and vessel diseases were selected. Patients underwent elliptical centric 3D CE-MRA with the test bolus technique to identify the individual arterial arrival time. Quantitative measurements were performed by drawing ROIs of $25mm^2$ and signal intensities (SI) were measured in the center of common carotid artery (CCA), internal carotid artery (ICA) and aortic arch (AA). As a result, ROIs located within AA showed a significantly clarified arterial peak and over three times increased SI, while no significant arterial peak time differences were observed compared to ROIs located within CCA. In conclusion, it was demonstrated that the aortic arch is the optimal position to locate ROI in test bolus images of the carotid CE-MRA.

• Journal of the Korean Society of Safety
• /
• v.18 no.2
• /
• pp.6-15
• /
• 2003

A method is presented for diagnosing the converter bearings by using acoustic emission. The flaking mechanism causing the large-scale bearing for furnace to flaw is investigated and a possibility of defect is verified by Finite Element method. he diagnosis logic is proposed fir detecting the flaw of a non-continuous rotating machine. It is proved that the acoustic emission energy can be used as a representative parameter for an acoustic event. Applying the method to the tilting bearings for steel mill in operation, the effectiveness of this logic is evaluated. It is shown that AE signal is generated only when the bearing is tilting, and the trend analysis can be focused upon this process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.205-209
• /
• 1997

본 고에서 소개될 내용은 기존에 계측기로 구성되는 시스템의 하드웨어 구성과 PC로 구성할 때의 사양 비교를 알아보며, 응용 프로그램에 있어 상용화된 프로그램 tool을 활용하여 응용 프로그램을 개발하는 기술과 지원 방안을 제시하고자 하며 엘텍에서는 이러한 하드웨어와 user 응용 프로그램의 완벽한 개발로 실사용자들이 보다 나은 시스템 환경에서 완벽한 시험/측정/분석의 업무를 수행할 수 있도록 지원한다. 또한 외국의 많은 업체가 이 프로그램을 이용하여 자체 시스템을 구축하여 국내에 소개되는 시스템이 많은 실정이다. 엘텍에서는 이미 NDT, AE, THD/전원 분석을 위한 시스템 및 프로그램 개발을 완료했으며 국내에 이미 소개된 시스템도 있다. 그러므로, 소음.진동 분야에도 완벽한 시스템 구축을 추진하고자 한다.