• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.124-130
• /
• 1995

연삭작업에 있어서 요구되는 가공능률과 가공정밀도를 얻기 위해서는 적절한 결합도를 갖는 연삭숫돌을 선택하 는 것이 중요한 요건이 된다. 본 연구에서는 결합도를 평가하기 위한 일정한 기준을 설정할 목적으로 AE계측 시스템을 이용하여 대월식결합도시험방법에 따라 연삭숫돌표면의 일부를 파괴시켰을 때 발생되는 AE신호를 검출 하고 연삭숫돌의 파괴량과 AE 신호특성과의 관계 및 AE를 이용한 결합도평가의 가능성을 검토하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.90-98
• /
• 2005

A monitoring system is necessary to make the polishing process more reliable in order to ensure the high quality and performance of the final products. Generally, AE (Acoustic Emission) is known to be closely related to the material removal rate (MRR). As the surface becomes rougher, the MRR and AE increase. Therefore, the surface roughness can be indirectly estimated using the AE signal measured during the polishing. In this study, an AE sensor-based monitoring system was fabricated to detect the very small AE signal resulting from the friction between a tool and a workpiece during polishing. The performance of this monitoring system was estimated according to polishing conditions, the relation between the level of the AE RMS and the surface roughness during the polishing was investigated.

• Journal of Mechanical Science and Technology
• /
• v.20 no.2
• /
• pp.197-204
• /
• 2006

The purpose of this study is to evaluate the AE characteristics for the basemetal, PWHT (post-weld heat treatment) and weldment specimens of SA-516 steel during fracture testing. Four-point bending and AE tests were conducted simultaneously. AE signals were emitted in the process of plastic deformation. AE signal strength and amplitude of the weldment was the strongest, followed by PWHT specimen and basemetal. More AE signals were emitted from the weldment samples because of the oxides, and discontinuous mechanical properties. AE signal strength and amplitude for the basemetal or PWHT specimen decreased remarkably compared to the weldment because of lower strength. Pre-cracked specimens emitted even lower event counts than the corresponding blunt notched specimens. Dimple fracture from void coalescence mechanism is associated with low-level AE signal strength for the basemetal or PWHT. Tearing mode and dimple formation were shown on the fracture surfaces of the weldment, but only a small fraction produced detectable AE.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.241-251
• /
• 1988

The purpose of this paper is to evaluate fracture strength of WA-vitrified and resinoid bond grinding wheels by means of acoustic emission. The paper conducts tension test, compression test, splitting tensile test and bending test with AE measuring system. These tests have been carried out in accordance with the grain sizes and grades of grinding wheels. The fracture strength of grinding wheels is evaluated by the clarification of biaxal fracture criterion of Babel and Sines. It clarifies the influence of factors of grinding wheel upon AE characteristics and evaluates the predictability of life of grinding wheels and the perception of fracture.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.500-507
• /
• 2011

Acoustic emission(AE) signals during the polymerization shrinkage of composite resin subjected to the LED light exposure were detected through a wave guide method and a direct sensor attachment method. For PMMA, human tooth, stainless steel substrate, data of AE hits and amplitudes were compared. For the test using the wave guide, AE amplitudes decreased because of the attenuant wave. However, AE hits and 1st peak frequency distribution were not different according to the sensor attachments. Through the experiments, wave guide could be used for a nondestructive evaluation of the marginal disintegrative fracture of dental restoration.

• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.73-78
• /
• 1999

This paper describes the relationship between the bending strength properties of sloped finger-jointed woods and the acoustic emissions(AEs) generated during the test. Rhus verniciflua pieces were cut in sloped-finger types and glued with three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The AE cumulative event count and cumulative count were measured during the bending test. The results were as follows: The lower the bending strength(load) was, the generation time of AE event count got and the higher the increasing rate of AE event count became in the sloped finger-jointed specimens bonded with polyvinyl acetate, polyvinyl-acryl acetate oilic urethane resin adhesives. Therefore, the slope from load-AE cumulative event count was very steep. The patterns of AE event count and count were very similar. The relationship between the MOR and the AE parameter from load and AE cumulatve event count in the early stage of the sloped finger-jointed specimens bonded with polyvinyl acetate, polyvinyl-acryl and oilic urethane resin adhesives was much greater than that between the MOE and the MOR. Therefore, the AE signals obtained during bending test are useful for estimating the strength of sloped finger-jointed Rhus verniciflua specimens.

• Nutrition Research and Practice
• /
• v.7 no.6
• /
• pp.460-465
• /
• 2013

The hepatoprotective activity of Acanthopanax koreanum Nakai extract (AE) was investigated against D-Galactosamine/Lipopolysaccharide (D-GalN/LPS)-induced liver failure rats compared with that of acanthoic acid (AA) isolated from AE. Although D-GalN/LPS (250 mg/kg body weight/$10{\mu}g/kg$ body weight, i.p.) induced hepatic damage, pretreatments with AE (1 and 3% AE/g day) and AA (0.037% AA, equivalent to 3% AE/g day) alleviated the hepatic damage. This effect was the result of a significant decrease in the activity of alanine transaminase. Concomitantly, both the nitric oxide and IL-6 levels in the plasma were significantly decreased by high-dose AE (AE3) treatment compared to the GalN/LPS control (AE0). This response resulted from the regulation of pro-inflammatory signaling via a decrease in TLR4 and CD14 mRNA levels in the liver. While a high degree of necrosis and hemorrhage were observed in the AE0, pretreatment with AE3 and AA reduced the extent of hepatocyte degeneration, necrosis, hemorrhage and inflammatory cell infiltrates compared to the AE0. In conclusion, these results suggest that especially high-dose AE are capable of alleviating D-GalN/LPS-induced hepatic injury by decreasing hepatic toxicity, thereby mitigating the TLR 4-dependent cytokine release. The anti-inflammatory effect of AE could be contributing to that of AA and AE is better than AA.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.3
• /
• pp.174-183
• /
• 1996

Acoustic emission(AE) response during stress corrosion cracking(SCC) of Inconel 600 alloy has been monitored to study the AE detectability of crack generation and growth by comparing the crack behavior with AE parameters processed, and to evaluate the applicability as a nondestructive evaluation(AE) by measuring the minimum crack size detectable with AE. Variously heat-treated specimens were tensioned by constant extension rate test(CERT) in various extension rate to give rise to the different SCC behavior of specimens. The AE amplitude level generated from intergranular stress-corrosion cracking(IGSCC) is higher than those from ductile fracture and mechanical deformation, which means the AE amplitude can be a significant parameter for distinguishing the An source. AE can also provide the effective means to identify the transition from the small crack initiation and formation of dominant cracks to the dominant crack growth. Minimum crack size detectable with AE is supposed to be approximately 200 to $400{\mu}m$ in length and below $100{\mu}m$ in depth. The test results show that AE technique has a capability for detecting the early stage of IGSCC growth and the potential for practical application as a NDE.

• Journal of Nutrition and Health
• /
• v.47 no.2
• /
• pp.106-112
• /
• 2014

Purpose: This study was conducted in order to investigate the protective effects of ethanolic extract of Acanthopanax koreanum Nakai (AE) against carbon tetrachloride ($CCl_4$)-induced liver injury in rats. Methods: Male Sprague-Dawley rats were randomly divided into four groups in order to receive the following experimental diets with intraperitoneal injection of $CCl_4$ (2.0 mL/kg body weight, 20% solution 0.65 mL) for eight weeks (n = 8 per group): $CCl_4$ control (CON), $CCl_4$ + AE 1% (AE1), $CCl_4$ + AE 3% (AE3), or $CCl_4$ + acanthoic acid 0.037%, which is equivalent to AE 3% (AA). Results: Highest serum ALT activity and albumin level were observed in the $CCL_4$ control group, but showed a significant decrease by either AE or AA supplementation in a dose-dependent manner (p = 0.0063 and 0.0076, respectively). Both hemotoxylin and eosin staining and Masson's staining indicated remarkable prevention of $CCl_4$-induced liver damage in the AE3 group. $TNF{\alpha}$ and IL-6 production were significantly lowered in the AE treated groups, but not in the AA group (p = 0.0016 and p = 0.0002, respectively). The effects of AE3 were greater than those of AA for inflammation and liver toxicity biomarkers. Conclusion: Taken together, the results suggested that ethanolic extract of Acanthopanax koreanum Nakai provided hepatoprotective effects, leading to the reduction of inflammatory response. In addition, the effect of AE was superior to that of single compound AA.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.790-799
• /
• 1997

Aegilops genus is known to include the donor species of the Band D genome of the bread wheat(ABD). An effort to establish a better strategy for phylogenetic relationships about Aegilops polyploids by AFLPs(Amplified Fragment Length Polymorphisms) was conducted using the 19 Aegilops sPP. and T. aestivum. The 207 polymorphic bands from the amplified products on the 6% acrylamide denaturing sequencing gels were obtained with the 7 AFLP primer combinations, and used to account for the genetic similarities and cluster analysis using NTSYS program. According to the genome analysis, the $M^h$-genome of Ae. heldreichii was estimated as an intermediate genome between the M-genome of Ae. comosa and N-genome of Ae. uniaristata and supposed to be incorporated in the establishing process of UM-genome as a possible diploid donor. And Ae. ventricosa(DN) was more close to Ae. umbellulata(U) than Ae. squarrosa(D). The close relationship between Ae. squarrosa and T. aestivum was perceived as a diploid donor of D-genome. As for the polyploid species, hexaploid Ae. triaristata was more closely related to Ae. columnaris rather than tetraploid Ae. triaristata. The clustered groups were, basically same to the previous Gihara's sections based on phenotypes and pairing analysis of interspecific hybrids. AFLP was evaluated as an efficient and powerful method in the genome evaluation of closely related species.