• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1003-1007
• /
• 1997

This study is na introduction of ADS in which we have written out programs which can design three-dimensional machine parts and reduce the required time for design them comparing with other CADs. Among the machine parts, screws are commonly used in joining one part to another because of easy handling but welding and rivet are used to join permanently them even thought hard operation. Consequently, w have developed the screw for permanent fixing using stairs type screw threads, which is considered as the main machine parts in joining. For that, we designed permanent fastened screws according to the different rotation angle using VisualLISP and transferred it to ANSYS, structural solution program, to find out allowance load, maximum equivalent stress and where it occur.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.152-157
• /
• 2001

This paper is to model a 3D-shape product applying mathematically the data acquired from a 30 scanner and using an Automatic Design Program. The research studied in th reverse engineering up to now has been developed continuously and surprisingly. However, forming 3D-shape sol id models in CAE and CAM. based on the research, the study leaves much to be desired. Especially, analyses and studies reverse-designing automatically using measured data after manufacturing. Consequently, we are going to acquire geometric data using an 30 scanner in this study with which we will open a new field of reverse engineering by a program which can design a 3D-shape solid model in a CDA-based program automatically. Utilization of this program make it possible to minimize time in designing a product and establish a ADS(Automatic design system) program library to using all of the data from reverse engineering.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.233-236
• /
• 2001

We have designed and fabricated ASK modulator MMIC operating at 5.8GHz for OBE used in AGPS (Automatic Gate Passing System). ASK modulator MMIC was designed to apply a sing1e supply voltage of 3V to the drain in order to decrease ACP (Adjacent Channel Power). The measurement result of this chip exhibits on/off characteristic over 30dB. The design parameters are optimized through ADS simulation tool. The layouts and fabrication o( ASK Modulator MMIC were designed and fabricated by using ETRI 0.5${\mu}{\textrm}{m}$ MESFET library. The chip sizes were 1mm $\times$1mm. The performance analysis of the implemented ASK Modulator based on the design parameters is accomplished.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.265-269
• /
• 1989

Computerized to techniques have been applied to outage call processing system for rapid restoration of power to customers. This paper presents computer aided outage call processing system called '123' system, which has been in operation since 1987. And, also describes its origins, design conception to be considered and its operation effects. From a positive point of view, it shows the functions needs to be added and some problems to be improved. Additionally, it describes the integrated system which has functions of detecting distribution failure, locating failure position by logical computer processing, and although ADS (Automatic Distribution System) has yet to be built up, the primary purpose of the system is to improve service to the customer by means of rapid restoration of electricity outage.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.6
• /
• pp.530-536
• /
• 2016

The handling quality simulator including high fidelity flight mechanics model is indispensable component to design and verify the flight control system. Korea Aerospace Industries, LTD. (KAI) has been performing LCH (Light Civil Helicopter) core technology development program regarding automatic flight control system (AFCS) software development. And KAI has been developing flight mechanics model using FLIGHTLAB to design and evaluate the AFCS flight control law. This paper presents the handling quality assessment environment development results through the combining FLIGHTLAB with a legacy simulator. And this paper details the FLIGHTLAB model, application development process and FLIGHTLAB interface design. The developed handling quality assessment environment has been demonstrated with the ADS-33E hover and pirouette MTE (Mission Task Element) maneuver simulation.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.58-62
• /
• 2010

This paper presents the effects of RF performance parameters on the Galileo receiver design via simulation after reviewing the requirements of the Galileo receiver structure. At first, we considered the general requirements, structure and characteristics of the Galileo system. Then we designed the Galileo receiver focused on performance requirement of 16 dB C/N which is equal to 15 % Error Vector Magnitude(EVM) by using Advanced Design System(ADS) simulation program. In order to verify the function of Automatic Gain Control(AGC)), we measured the IF output power level by changing the input power level at the front - end of the receiver. We analyzed the performance degradation due to phase noise variations of Local Oscillator(LO) in the Galileo receiver through EVM when the minimum sensitivity level of -127 dBm is applied at the receiver. We also analyzed the performance degradation according to variable Analog-to-Digital Converter(ADC) bits within the Dynamic range, -92 ~ -139 dBm, which has been defined by gain range (-2.5 ~ +42.5 dB) in the AGC operation. The results clearly show that the performance of the Galileo receiver can be improved by increasing ADC bits and reducing Phase Noise of LO.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.441-447
• /
• 2003

In the study, we described on the 3D solid model be made on the AutoCAD haved an effect on the deviation of form as RP manufactures the facetres. The STL file improved the deviation of form as the facetres value but the deviation of form have the difference a little as the RP system. In result, we ruled the correlation with the 3D solid model and the RP sample manufacturing, with manufacture RP sample according to facetres value in complex shape. And we developed the program which recombination the STL file that we make use of the AutoLISP.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.189-192
• /
• 2014

Recently, U.S. and Europe, which are advanced to Air Traffic Control Management, are interest in replacing Radar System with Communications, Navigation and Surveillance(CNS) and Air Traffic Management(ATM). They pursue to research the efficient Air Traffic Control Management. This paper covers ADS-B 1090ES system which is one of CNS/ATM surveillance systems. This research satisfied all performance required by RTCA DO-268B and EUROCAE ED-129. It optimized algorism to mainly enhance performance such as quality of receiver signal, dynamic range, and so on. The optimized mechanism provided stable performance of demodulation, tuned the level of signal, and had reduced the false reception ratio by the signal level difference. The analyzed algorism helped great performance and will be considered to apply broad system applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.697-707
• /
• 2015

This paper covered the design and implementation of the demodulation receiver in the ADS-B 1090ES system, which is one of the CNS/ATM's surveillance systems. This researched demodulation performed at the level required by RTCA DO-268B and EUROCAE ED-129. The single signal process method, which applies a baseline multi-sample technique among multi-amplitude sample demodulations, was suggested to improve the quality of the receiver signal, the dynamic range and so on. The suggested multi-signal level tuning method has enhanced the single-signal process method, reducing the unstable reception ratio by the transmit output level difference and manufacturing receiver hardware. The result was that the receiver suggested by the method had 0~87dBm in dynamic range and -90dBm in MTL. This shows a better performance by -3dBm less than the international standard in ADS-B 1090ES ground receiver equipment. The systems which use a similar modulation method, will be considered to be widely applied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2273-2280
• /
• 2013

This article introduces the next-generation air surveillance system and investigates how to design of front-end low noise amplifier of the ground station receiver. In consideration of the international standard documentation and the performance of existing products, the study conducts the link budget on the entire system so that it can be competitive in terms of receive sensitivity or reliability. To obtain a proper low noise amplifier, standards of design are decided so that such factors as gain, gain flatness, and reflective loss can be optimal. In its design, the bias circuit appropriate for the characteristics of low power, low noise, or high gain was built, and according to the results of the simulation conducted after the optimal design, its gain was 16.24dB, noise factor was 0.36dB, input-output reflective loss was -18dB and -28dB each, and frequency stability was 1.11. According to the results measured after the design, its gain was 17dB, noise factor was 0.51dB, gain flatness was 0.23dB, and input-output reflective loss was -18.28dB and -24.50dB each, so the results gained were suitable for building the overall system.