• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.350-358
• /
• 2014

The collapse of Langmuir monolayers of arachidic acid (AA) on water at various rates of molecular area compression has been investigated in situ by imaging ellipsometry (IE). The thickness of the collapsed AA molecules, which are inherently inhomogeneous, was determined by IE with a spatial resolution of a few microns. For the analysis, we determined the dielectric function of AA monolayers from 380 to 1690 nm by conventional spectroscopic ellipsometry. Compression rates ranged from 0.23 to $0.94{\AA}^2/min$. A change of multilayer domains was observed in the in situ IE images. Lower compression rates resulted in more uniform collapsed films. Our experimental results correspond with previous theoretical simulations.

• 한국결정성장학회지
• /
• 제18권3호
• /
• pp.131-135
• /
• 2008

본 연구에서는 합성운모에 대한 코팅기술을 확립한 뒤, 비수성을 나타내는 합성운모를 제조하였다. 합성운모의 표면코팅은 고속교반기를 사용하여 행하였으며, 스테아린산으로 코팅된 합성운모의 특성은 침적실험, XRD 및 SEM을 이용하여 분석하였다. 본 연구 결과, 교반기의 내부온도는 $70^{\circ}C$를 유지하고, 10분 동안 1600 rpm/min을 행함으로써 운모 표면에 스테아린산의 코팅이 가능하였다. 또한 SEM 관찰결과로부터, 스테아린산과 운모의 혼합비율, 교반기 내부온도, 회전속도에 의해 특성이 변화하는 반면 코팅처리시간과는 무관함을 알 수 있었다.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.41-46
• /
• 2004

The formation of rust on metallic substrate is known to cause the damages and destructions of raw materials, which is one of the leading reasons of sturctural collapses and many kind of hazards in modern industry. Polymer gels with rust removing effects were compounded in this study by employing various kinds of acids like hydrochloric acid, phosphoric acid, gluconic acid, oxalic acid as the rust removing ingredients. TEA(Triethanolamine) as dispersant and hydrophilic chemical were used for effective gelation of acids. Also corrosion inhibitor was added to enable the coating effect and to improve rust removing effect on metallic surface. In order to investigate the rust properites on metallic substrate, artificial rusts were prepared in salt solution, using iron, copper, aluminium and brass as the base metals. The properties of gel compounds were checked by gelation, pH, viscosity, morphology property and rust removing test. Developed gel compounds in this study have a good rust removing property, showing a strong adhesion on horizontal and vertical metallic surface, and can be easily rinsed off by water.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.149-155
• /
• 2001

New semi-fluorinated polyol esters were synthesized by condensation reaction of polyols (NPG and TMP) and carboxylic acids such as 2-ethylhexanoic acid, stearic acid and perfluorooctanoic acid. The structures of polyol esters were confirmed by FT-IR and H-NMR etc. And, the fluorinated polyol esters were insoluble in several oils, however, the semi-fluorinated polyol esters were soluble in several oils depended on the structure of polyol esters. The physical properties such as 4-ball wear property and extreme-pressure (EP) properties were characterized by measuring wear scar diameter through ASTM D2266 and by determining the load-carrying through ASTM D2783 method, respectively. As the results, wear scar diameters of oils in which the semi-fluorinated polyol esters were added were not changed compared to those of not added oils. While extreme-pressure properties remarkably Increased with fluorine contents of the esters depended on the structure of acid moiety and polyol moiety. Also, the extreme-pressure property of semi-fluorinated NPG polyol ester in gasoline engine oil was better than that of commercial Teflon coating additive.

• 수산해양기술연구
• /
• 제34권1호
• /
• pp.96-103
• /
• 1998

Lead-acid battery is being most widely used with secondary battery because of its low price, and long life cycles. But According to using for a long time, its voltage, capacity, and recovery ability is decreased gradually. Therefore there are many papers about improving the property of a lead-acid battery. One of them is to slow down sulfation due to formation of inner PbSO sub(4) by adding inhibitor to electrolyte, however it was not well known what is inhibitor's composition and its role acting on both cathodic and anodic electrode because of its know-how of every country and companies. The purpose of this paper is to study about improvement of property of lead-acid battery by adding one of the inhibitor to H sub(2) SO sub(4) electrolyte.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.672-676
• /
• 2009

Polymide is widely used alignment material of recent commercial LCD panel structure. Generally, polyimide alignment material is classified soluble polyimide type and polyamic acid type with their main bond structure of solution state. specially, compared to polyamic acid alignment layer, soluble polyimide type alignment layer have excellent reliability during long term LCD driving cause of their high imidazation ratio(%), high voltage holding ratio(%) and low ion density. The other side, this type alignment materials has significant DC image stickicng side effect for using in-plane switching mode lcd structure cause of their slow DC discharging property. we applied inorganic salt to usual soluble polyimide type alignment layer and found out this technique had good DC image sticking property without any loss of reliability property in inplane switching LCD cell structure. This approach leads excellent DC image sticking property with maintaining high reliability property this approach confirmed improves an image sticking and a reliability simultaneously from the horizontality aligned LCD mode whose relatively bad image sticking property.

• 한국해양바이오학회지
• /
• 제6권2호
• /
• pp.47-52
• /
• 2014

Oxidation stability and cold fuid property are considered as the most important factors for determining biodiesel quality. Among the fatty acids, monounsaturated fatty acid satisfy both oxidation stability and cold flow property of biodiesel quality standards. Microalgae with high monounsaturated fatty acid contents is have some benefit for producing to produce biodiesels with satisfying quality standards. In this study, monounsaturated fatty acid contents of a isolated microalga from Youngheung island was analyzed. Phaeodactylum tricornutum was isolated by streaking, and growth rate and fatty acid composition of the algae were investigated. Total FAME contents were consisted of 26% of saturated fatty acids, 43% of monounsaturated fatty acids, and 18% of polyunsaturated fatty acids. The contents of monounsaturated fatty acid were especially high in the Phaeodactylum species. This result implies that the FAMEs from P. tricornutum may contribute to improve the oxidation stability and cold flow property of biodiesel.

• 한국식품영양과학회지
• /
• 제24권2호
• /
• pp.254-260
• /
• 1995

Yogurt base were prepared from milk added with skim milk powder or Aloe vera powder and femented with lactic acid bacteria(the single or mixed strain of Lactobacillus bulgaricus and Streptococcus thermophilus). The yogurt product were evaluated for acid production(pH, titratable acidity), number of viable cell, viscosity, sensory property and quality-keeping property. The composition of organic acid were also analyzed by HPLC. Addition of Aloe vera remarkably accelerated acid production, and titratable acidity of Aloe vera yogurts(1.293∼1.407%) after 24 hours incubation was higher than that of yogurts added with only skim milk powder(9.98∼1.110%). Yogurt fermented with the mixed strain of L. bulgaricus and Sc. thermophilus was more acidic than that of single strains. The propagation of lactic acid bacteria was stimulated by Aloe vera and the number of viable cell after 24 hours incubation were above 9.87log CFU/ml. Viscosity of Aloe vera yogurt(3,860∼4,300CPS) was higher than that of yogurt with only skim milk powder(2,402∼2,604CPS). The overall sensory score of Aloe vera yogurt femented by mixed strain was the best of tested yogurt. When yogurt with Aloe vera was kept at 5℃ for 15 day, it's quality-keeping property was relatively good. The major organic acid of Aloe vera yogurt was lactic acid and lactic acid content of yogurt increased by addition of Aloe vera powder. The citric acid content decreased wtih fermentation and malonic acid, pyroglutaric acid and α-ketoglutaric acid were analyzed out a little.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.101-107
• /
• 1995

케탈이나 아세탈반응에 의하여 이루어진 1, 3-디옥솔란 고리가 산수용액 중에서 불안정해 쉽게 가수분해되는 성질을 이용하여 소수부로는 지방산의 탄화수소사슬을 친수부로는 소디움 카르복시산(Soap)을 도입하여 분해 후 계면활성을 띠지 않는 분해성 계면활성제이다. 이 화합물의 수용액에 대한 표면장력은 31dyne/cm였고, 임계미셀농도는 $1.0{\times}10^{-3}mol/L$이었다. 기포력은 비교적 좋지 않았으며, 유화력은 콩기름보다 벤젠에서 양호하였다. 또한 이 화합물의 산분해 특성을 1wt% 수용액과 벤젠 사이의 계면장력 변화에 의하여 측정한 결과 pH 1 ${\sim}$ 4범위에서 약 300분 안에 모두 가수분해됨을 확인하였다.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.365-371
• /
• 2009

It is well known that the properties of concrete such as the compressive strength, water permeability, water tightness and durability are affected by micro-structure in hardened cement paste. Especially, for durability of concrete, watertightness of cementitious materials is the most critical property among various properties. Recently, many types of materials as organic and/or inorganic materials are used for watertightness of concrete. In this study, The effect of Stearic Acid at $0.5\;wt%{\sim}3.0\;wt%$ adding ratios on the hydration and watertightness property of cement were investigated. And we also discussed the changing of microstructure in hardened cement paste by addition of Stearic Acid. Cement paste with Stearic Acid showed improvement of watertightness by reducing of cement total pore volume and decomposition of Stearic Acid.