• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.81-95
• /
• 1994

This study was performed in a diatomite factory where silicosis had been found at October, 1993. The major objectives were to evaluate worker exposure to diatomaceous earth and to present engineering control methods for workplace management. Total and respirable dust of diatomaceous earth were measured. Size distribution of dust was analyzed by applying the multiple diffraction method. Also crystalline silica in respirable dust samples was analyzed qualitatively by X-ray diffraction. The suitable Local Exhaust Ventilation systems for that factory were recommended. The results were as follows. The airborne total and respirable dust concentrations by exposure groups showed approximate normal distribution. The means of total dust exposures at flour maufacturing, fire brick grinding and packaging, ceramic raws packaging processes exceeded Korean and ACGIH standards, $10mg/m^3$. The means of total and respirable dust concentrations to high exposure groups were 6.8 and 3.9 times higher than those of low expousre groups, respectively. The size distribution of diatomaceous earth dust was lognormal with a median diameter of $7.07{\mu}m$(range, $0.10-60.0{\mu}m$) and with a geometric standard deviation of 1.43. The crystalline silica in respirable dust samples was identified to quartz and cristobalite and/or tridymite. Above results suggest that engineering controls and periodic environmental and medical surveillances will be important for preventing silicosis in the diatomite factory.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.166-176
• /
• 1993

In order to investingate the renal dysfunction in workers exposed to aromatic organic solvents, 105 male exposed workers and 109 controls were participated in this study. This study was conducted to examine the correlation among the concentration of aromatic organic solvents in air, worker's urinary NAG activity and urinary hippuric acid. The results were as follows : 1. The exposure level of aromatic organic solvent mixture caculated by the equation proposed by ACGIH was ranged from 0.27 to 0.54 and toluene concentration was ranged from 18.3ppm to 48.3ppm. 2. NAG activity in the urine of control and exposed group were $36.1{\pm}14.2nmolMU/mg$ creatinine and $52.4{\pm}26.1nmolMU/mg$ creatinine, respectively. Hippuric acid concentration in the urine of control and exposed group were $191.1{\pm}194.2mg/g$ creatinine and $789.3{\pm}784.1mg/g$ creatinine, respectively. 3. Correlation coefficent between the exposure level of aromatic organic solvent mixture was significantly related to urinary NAG activity(r=0.542) and urinary hippuric acid(r=0.752). 4. Correlation coefficient between NAG activity and hippuric acid concentration was 0.357. This study suggested that urinary NAG activity was a good renal function index for aromatic organic solvents exposure and urinary hippuric acid was an index for the biological monitoring of toluene exposure.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.4
• /
• pp.322-334
• /
• 2007

This study covers the investigation of the actual condition in the workplace to produce plastics products using synthetic resins and the investigation on the trends amount of the domestic production of thermoplastic resins. To analyze the monomers included in thermoplastic resins frequently used in the workplace, we analyzed thermal characteristics for test compounds using thermogravimetric analysis and did the qualitative analysis using Pyrolyzer GC-MSD & TDS GC-MSD. And then we classified the health hazard of monomers based on GHS classification criteria using information toxicity & carcinogenicity. The number of the workplace to produce plastics products among all domestic manufacturers of 73,884 was 4,391 (5.94%). The number of workers to produce plastics products among all workers of 2,522,750 in all domestic manufacturers was 104,971 (4.16%). The amount of production per year for thermoplastic resins is in the order of PP, HDPE, LDPE, PVC, ABS, PS and such compounds was producing over 1 Million ton per year each. The classification result based on GHS classification criteria for 22 main compounds included thermoplastic resins says 2 compounds of acrylonitrile, naphthalene are in Acute oral category 3 and benzene is in Acute dermal category 1. The classification results of health hazard of carcinogenicity based on IARC & ACGIH carcinogen classification says 2 compounds of benzene, vinyl chloride are in category 1A (known to be human carcinogens).

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.205-211
• /
• 2016

Excessive exposure to chemicals in the workplace can cause poisoning and various diseases. Thus, for the protection of labor, it is necessary to examine the exposure of people to chemicals and risks from these materials. The purpose of this study is to evaluate semi-quantitative health risks of exposure to harmful chemical agents in the context of carcinogenesis in a latex glove manufacturing industry. In this cross-sectional study, semi-quantitative risk assessment methods provided by the Department of Occupational Health of Singapore were used and index of LD50, carcinogenesis (ACGIH and IARC) and corrosion capacity were applied to calculate the hazard rate and the biggest index was placed as the basis of risk. To calculate the exposure rate, two exposure index methods and the actual level of exposure were employed. After identifying risks, group H (high) and E (very high) classified as high-risk were considered. Of the total of 271 only 39 (15%) were at a high risk level and 3% were very high (E). These risks only was relevant to 7 materials with only sulfuric acid placed in group E and 6 other materials in group H, including nitric acid (48.3%), chromic acid (6.9%), hydrochloric acid (10.3%), ammonia (3.4%), potassium hydroxide (20.7%) and chlorine (10.3%). Overall, the average hazard rate level was estimated to be 4 and average exposure rate to be 3.5. Health risks identified in this study showed that the manufacturing industry for latex gloves has a high level of risk because of carcinogens, acids and strong alkalisand dangerous drugs. Also according to the average level of risk impact, it is better that the safety design strategy for latex gloves production industry be placed on the agenda.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.163-169
• /
• 2017

Objectives: This study was conducted toestimate quartz concentrations and contents in the airborne respirable dust from various industries. Methods: A total of 818 samples were collected from 174 industries. Respirable dust samples were collected using a cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. The quartz concentrations were identified using the intensity of the absorption peak of quartz at $799cm^{-1}$ by Fourie Transformed Infrared Spectroscopy(FTIR). Results: The respective geometric means for quartz concentrations in the respirable dust were 0.0050, 0.0049, 0.0025, and $0.0019mg/m^3$ in foundries, ceramics, construction, and cement/stone. The geometric mean of quartz contents analyzed by FTIR were respectively 3.43, 1.99, 1.04, and 0.82% for ceramics, foundries, cement/stone, and construction. The rate of exceeding the Korean Occupational Exposure Limit($0.05mg/m^3$) was 2.03%, but rate of exceeding the American Conference of Governmental Industrial Hygienist(ACGIH) Threshold Limit Value($0.025mg/m^3$) was 7.12%. Conclusions: Given that foundries had a higher quartz concentration, there is a need to reduce respirable dust, such as through wet operation. In order to protect the health of workers exposed to mineral dust, it is necessary to actively consider strengthening the Korean Occupational Exposure Limit.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.3
• /
• pp.270-279
• /
• 2020

Objective: The aim of this study was to propose revision of the occupational exposure limit(OEL) for 1-Bromopropane(1-BP) following a review of the appropriateness of the standard in light of increasing epidemiological data and handling risk. Materials and Methods: The results of toxicity and epidemiologic investigations for 1-BP and agencies' OELs were compared and reviewed through a literature review. In order to investigate the status of 1-BP handling in South Korea, data from work environment actual condition survey results and work environment measurement results were used. Results: The toxicity of 1-BP, such as central nervous system(CNS) damage, peripheral neuropathy, hematological adverse effects, and developmental and reproductive toxicity(male and female) has been reported. ACGIH recommends 0.1 ppm as a TLV-TWA value, but the OEL of South Korea stands at 25 ppm, which is 250 times higher than the TLV-TWA. Although 1-BP is a specially managed substance under the Industrial Safety and Health Law, the currently applied OEL cannot be said to be a safe level based on the results of epidemiological studies to date. In a work environment measurement in 2017, the total number of samples was 626, which were derived from 78 industries, and the average concentration was 1.173 ppm(standard deviation 2.88). Conclusions: To protect the health of workers handling 1-BP, estimated to be 780 in South Korea, it is necessary to strengthen the OEL(TWA) to a level of 0.3 ppm(lower than the 0.34 ppm with known toxic effects), which is believed to be safe as a result of epidemiological investigation. "Skin" notation should be recommended.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.1 s.49
• /
• pp.1-12
• /
• 1995

Diatomaceous earth, quarried from the remains of aquatic plants deposited millions of years ago, continues to be a very important raw material with many industrial uses. In its natural state, diatomaceous earth is an amorphous silica with no crystalline pattern. For many uses, however, it is calcinated and calcination converts a portion of the amorphous silica to a crystalline form, cristobalite which is far more fibrogenic. In a factory which produces calcinated diatomaceous earth, seven workers were proved as pneumoconiosis on 1991 and 1992. Authors reviewed medical chart and current status of them. Authors also examined thirty one subjects from the factory with questionnaire, physical examination, spirometry and chest radiography on August 13th 1993. The radiographs were independently interpreted by two radiologists and their findings were classified by International Classification of Radiography of Pneumoconiosis(ILO, 1980). Total and respirable dust of diatomaceous earth were measured on October 1993. The results were as follows; 1. Of 31 workers, 6 (19.4%) were diagnosed as diatomaceous earth pneumoconiosis. There was an increasing tendency in prevalence of pneumoconiosis as the duration of dust exposure gets longer. 2. There were no significant differences in age, smoking rate, alcohol drinking rate, and pulmonary function test results between cases and non-cases. 3. The means of total dust exposures at flour manufacturing, fire brick grinding and packaging, ceramic raws packaging processes exceeded Korean and ACGIH standards, $10mg/m^3$. Above results suggest that engineering controls, periodic environmental and medical surveillance are important for preventing pneumoconiosis in the diatomite factory.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.4
• /
• pp.454-465
• /
• 2016

Objectives: The purpose of this study was to evaluate trends in asbestos exposure among asbestos-handling industries from 2000 to 2005. Methods: The data included the number of industries and workers exposed, concentrations of asbestos and the amount exceeded, and the type and size of industry by year. These data were collected by 46 regional employment and labor offices in Korea using work environment monitoring reports. A total of 1,481 samples from 284 industries were extracted from the reports and were analyzed with no data modification. Results: The means of asbestos concentration decreased from $0.84f/cm^3$ to $0.03f/cm^3$ during the period 2000-2005. Among the total of 1,481 samples, 11 samples(0.7%) exceeded the KOEL, and 178 samples(12.0%) were ACGIH TLV. The insulating paper product manufacturing industry was found to have the highest level of asbestos, followed by the fireproofing manufacturing industry, brake lining products manufacturing industry, commutator products manufacturing industries, and construction materials manufacturing industry. The number of asbestos handling industries decreased from 48 industries with 1,155 employees to 37 industries during the period of 2000 to 2005, but the number of asbestos workers expanded to the point that 1,182 employees could be found in 2005. Conclusion: Based on these results, the strengthening of the KOEL and new regulations turned out to help reduce asbestos exposure levels. This study recommends that retrospective exposure to asbestos based on various industry types should be assessed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.200-210
• /
• 2018

Objectives: The purpose of this study is to assess the exposure to ozone and total volatile organic compounds(TVOCs) generated during welding work at a shipyard and recommend respiratory protective equipment(RPE) adequate against these hazards. Method: Ozone was collected for about 30 minutes at two-minutes intervals using a direct reading instrument, specifically an ozone analyzer(Serinus 10, Ecotech, Australia). TVOCs were collected for about 30 minutes at three-minute intervals using a portable GC (Alpha 115, Synspec BV, the Netherlands), and were determined simultaneously by area sampling at the welding plume closest to the welder's breathing zone. The total measurements were 162 for ozone($CO_2$ welding 47, TIG 60, stick 55), and 136 for TVOCs($CO_2$ 65, TIG 50, stick 21). Based on these measurements, a literature survey was conducted to assess the adequacy of RPE. Results: Relative to Korean OEL, measurements above STEL 0.2 ppm were 23.4% for $CO_2$, 63.3% for TIG and 14.5% for stick welding. There were significant differences(p=<0.0001) among welding types. Compared with ACGIH peak exposure of 0.4 ppm for ozone, which is not applied in Korea, $CO_2$ welding exceeded it by 10.6%, TIG by 40.0% and stick by 7.3%. Although it was not feasible to compare them directly since there are no Korean OEL, TVOCs had very high levels similar to the concentrations before moving into a new apartment and about 10-20 times the indoor air quality recommendations for some individual measurements. Conclusions: As ozone removal RPE has been recommended in welding environments for a long time(Lunau, 1967), this fact was demonstrated based on the results of the on-site work environment measurements(ozone and TVOCs). In conclusion, for all welding at a shipyard, gas/vapor and particulate combination RPE are recommended. If this is not possible, it should at least be present for TIG welding.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.4
• /
• pp.321-331
• /
• 2013

Objective: The aim of this study is to review the literatures on the regulation, standard and guideline for the human vibration in Korea and other countries. Background: This review can be used to prevent various diseases caused by the human vibration as a basis for the development of the policy. Results: In Korea, the general employers' duties related to human vibration are set forth the Health Measures(Article 24) in the Occupational Safety and Health Act. And then an employer shall take measures to protect the health of the workers concerned by improving other working conditions relating to working hours for the vibration prevention measures referred to in Article 24 of the Act. The European Union adopted a Directive in 2002 on minimum requirements for the health and safety of workers exposed to vibration. New Regulations on Vibration at Work will be introduced in Great Britain on 2005 to implement the Directive. In the U.S., both ANSI and ACGIH adopted the ISO standard for measurement and suggested exposure action and limit values. In Japan, the Ministry of Labor decided that the vibration syndrome among operators of rock drills and riveters etc. could be included in an occupational disease(1947). In addition, ISO standard was based on proposals and draft documents of many countries such as U.K, Japan and European, etc. Conclusion: In Korea, Occupational Safety and Health Act prevent vibration to health, but do not include exposure limits. It is therefore important to consider the new duties regarding to vibration risks added to the general duties.