• 대한화학회지
• /
• 제13권4호
• /
• pp.387-393
• /
• 1969

Gamma-ray induced copolymerization of phenyl acetylene with styrene is compared with that of the Ziegler catalyzed. The reactivity of styrene is greater than that of phenyl acetylene in the gamma-ray induced polymerization but much less than that of phenyl acetylene in the Ziegler catalyzed. The resulting copolymer is identified by means of DTA and spectrophotometry. Further, the liquid scintillation counting of styrene-${\alpha}-C^{14}$clarified the relative composition of the copolymers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.140-141
• /
• 2005

To measure elastic properties of semiconducting materials in power cable, we have investigated modulus of EVA/acetylene black composite showed by changing the content of acetylene black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then this was produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive acetylene black were 20, 30 and 40[wt%], respectively. The modulus experiment was measured by DMA 2980. The ranges of measurement temperature were from -50[$^{\circ}C$] to 100[$^{\circ}C$] and measurement frequency is 1[Hz]. The modulus of specimens was increased according to an increment of acetylene black content. And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to an increment of acetylene black content.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.138-139
• /
• 2005

To measure electrical properties and viscoelasticity of semiconducting materials in power cable, we have investigated dielectric properties and modulus of EEA/acetylene black composite showed by changing the content of acetylene black. The permittivity from experimental result was increased, while tan6 was decreased by an increment of the content of acetylene black. The modulus of specimens was increased according to a increment of a acetylene black content. And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to a increment of a acetylene black content.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.80-83
• /
• 2007

In order to characterize the catalytically active sites on carbon black, acetylene chemisorption had been examined recently at 773 and 873 K by using a pulse technique. As the inject ion was repeated at 773 K, the adsorbed amount gradually decreased and eventually the adsorption did not occur any more. At 873 K a constant amount of $C_2H_2$ was consumed repeatedly after several injections. Good linear relationships were obtained between the methane decomposition rate at 1123 or 1173 K and the cumulative acetylene adsorption at 773 K or the constant acetylene consumption at 873 K. Reasonable models for the associative acetylene chemisorption at 773 K and the constant acetylene consumption at 873 K on the armchair face at the edges of graphene layers were proposed. The constant consumpt ion may be explained by the "$C_2H_2$-addition-hydrogen- abstract ion (CAHA)" mechanism.

• Elastomers and Composites
• /
• 제47권3호
• /
• pp.231-237
• /
• 2012

본 연구에서는 EPDM 컴파운드에 여러 종류의 충전제를 사용하여 물리적, 기계적 특성을 관찰하였다. 충전제로는 Semi-reinforcing furnace black(SRF), high abrasion furnace black(HAF) 그리고 acetylene black을 사용하였다. 가교제로는 dicumyl peroxide (DCP)를 사용하였다. 레오미터, 경도계, 만능 재료 시험기, 영구 압축 줄음율 그리고 동적 점탄성 분석을 통하여 재료의 성질을 관찰하였다. EPDM 컴파운드에 충전제로 SRF를 사용하였을 때함량의 증가에 따라 인장강도와 파단 연신율은 증가하였으나, acetylene black을 사용하였을 때 함량의 증가에 따라 인장강도와 파단 연신율은 감소하였다. Acetylene black을 사용하였을 때 넓은 온도 범위에서 저장탄성률의 변화율이 적었다. 또한 EPDM 컴파운드의 tan ${\delta}$는 acetylene black을 사용하였을 때 우수한 결과를 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권3호
• /
• pp.595-598
• /
• 2010

Ab initio and DFT molecular orbital calculations predict that acetyl radical reacts with acetylene through interactions primarily involving the SOMO of the radical and the in-plane ${\pi}$-bond of acetylene. An energy barrier (${\Delta}E_1$) of 39.6 kJ $mol^{-1}$ is predicted for the preferred anti arrangement of reactants at the CCSD(T)/cc-pVDZ//BHandHLYP/cc-pVDZ level of theory. NBO analysis reveals additional interactions between the radical SOMO and the nearby C-H ${\sigma}$-bond in acetylene worth about 10% of the total transition state interaction energy. This type of orbital interaction has not previously been observed in radical addition reactions involving C-C ${\pi}$-bonds.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.319-322
• /
• 2008

The viability of acetylene addition in each step of aromatic formation initiated by vinyl radical and acetylene also with its competition with structure rearrangement is investigated by determining optimal geometries and barrier and reaction energies using quantum mechanical methods. In principle, the addition reaction has more difficult in term of free energy and enthalpy compared to geometry arrangement. Under combustion conditions, i.e. T = 1200 K, acetylene addition is unfavorable mechanism as the barrier energy values rise much higher than that of geometry arrangement. However, in longer chain hydrocarbon case, e.g. n-CxHx+1 where x ³ 8, C-C bond rotation is rather difficult and requires high energy to form a ring structure, elongation chain is preferable.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2965-2970
• /
• 2008

Effects of split injection and oxygen-enriched air on soot emissions in a DI diesel engine were studied by the KIVA-3V code. When split injection is applied, the second injection of fuel into a cylinder results in two separate stoichiometric zones which increases soot oxidation. As a result, soot emissions are decreased with split injection. When oxygen-enriched air is applied together with split injection, higher concentration of oxygen helps secondary combustion which results in a higher temperature in the cylinder. The increased temperature promotes growth reaction of acetylene with soot but doesn't improve the acetylene formation during the second injection of fuel. As more acetylene is consumed in the growth reaction of acetylene, the net acetylene mass in the cylinder is decreased, which leads to a decrease of soot formation. With an increase of soot oxidation caused by split injection, the soot emissions are decreased significantly. However, to avoid excessive NOx emissions with increased oxygen concentration, the level of oxygen concentration should be lower than 22% in volume.

• Elastomers and Composites
• /
• 제45권1호
• /
• pp.7-11
• /
• 2010

본 논문에서는 polyethyleneimine (PEI)를 커플링제로 사용하여 간단한 공정을 통하여 아세틸렌 블랙/실리카 복합체 입자를 제조하였다. 복합체 입자는 PEI를 아세틸렌 블랙 표면에 흡착시키고 졸-겔 합성공정을 통하여 실리카를 아세틸렌 블랙 위에서 합성하는 두단계 공정을 통하여 제조되었다. 복합체 입자의 모폴로지 분석 결과 실리카가 아세틸렌 블랙위에 존재하는 core-shell 구조를 확인하였으며, 표면에 상당한 미세기공이 존재함을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제13권5호
• /
• pp.482-486
• /
• 1992

Ion-molecule reactions of acetylene and mixed acetylene-ammonia cluster ions are studied using an electron impact time-of-flight mass spectrometer. The present results clearly demonstrate that $(C_2H_2)_n^+$ cluster ion distribution represents a distinct magic number of n=3. The mass spectroscopic evidence for the enhanced structural stabilities of $[C_6H_4{\cdot}(NH_3)_m]^+$ (m=0-8) ions is also found along with the detection of mixed cluster $[(C_2H_2)_n{\cdot}(NH_3)_m]^+$ ions, which gives insight into the feasible structure of solvated ions. This is rationalized on the basis of the structural stability for acetylene clusters and the dissociation dynamics of the complex ion under the presence of solvent molecules.