• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.407-410
• /
• 2018

As the operating frequency of an electromagnetic wave increases, the maximum output and wavelength of the wave decreases, so that the size of the circuit cannot be reduced. As a result, the fabrication of a circuit with high power (of the order of or greater than kW range) and terahertz wave frequency band is limited, due to the problem of circuit size, to the order of ${\mu}m$ to mm. In order to overcome these limitations, we propose a source design technique for 0.1 THz~0.3 GW level with cylindrical shape (diameter ~2.4 cm). Modeling and computational simulations were performed to optimize the design of the high-power electromagnetic sources based on Cherenkov radiation generation technology using the principle of plasma wakefield acceleration with ponderomotive force and artificial dielectrics. An effective design guideline has been proposed to facilitate the fabrication of high-power terahertz wave vacuum devices of large diameter that are less restricted in circuit size through objective verification.

• Journal of Periodontal and Implant Science
• /
• v.33 no.3
• /
• pp.457-474
• /
• 2003

The ultimate objective of periodontal treatment is to get rid of an on-going periodontal disease and further regenerate the supporting tissue, which is already destroyed, functionally. Currently, the bone grafting operation using various kinds of bone grafting materials and the operation for induced regeneration of periodontal tissue using the blocking membrane are performed for regeneration of the destroyed periodontal tissue. However, there are respective limitations Galenical preparations, which are used for regeneration of periodontal of tissue, has less risk of rejective reaction or toxicity that may be incidental to degradation and their effect is sustainable. Thus, in case they are applicable to a clinic, they can he used economically. Chitosan has such compatibility, biological actions including antibacterial activity, acceleration of wound treatment, etc., and excellent mechanical characteristics, which has recently aroused more interest in it. Also, it has been reported that it promotes osteogenesis directly or indirectly by functioning as a matrix to promote migration and differentiation of a specific precussor cell (for example, osteoblast) and further inhibiting the function of such a cell as fibroblast to prevent osteogenesis. In this study, the pure chitosan solution, which was obtained by purifying chitosan, was used. However, since this chitosan is of a liquiform, it is difficult to sustain it in a defective region. It is, therefore, essential to use a carrier for delivering chitosan to, and sustaining it gradually in the defective region. In the calvarial defect model of the Sprague-Dawley rat, it is relatively easy to maintain a space. Therefore, in this study, the chitosan solution with which ACS was wetted was grafted onto the defective region, For an experimental model, a calvarial defect of rat m s selected, and a critical size of the defective region was a circular defect with a diameter of 8 mm. A group in which no treatment was conducted for the calvarial defect was set as a negative control group. Another group in which treatment was conducted with ACS only was set as a positive control group (ACS group). And another group in which treatment was conducted was conducted with by grafting the pure chitosan solution onto the defective region through ACS which was wetted with the chitosan solution was set an experimental group (Chitosan/ACS group). Chitosan was applied to the Sprague-Dawley rat's calvarial bone by applying ACS which was wetted with the chitosan solution, and each Sprague-Dawley rat was sacrificed respectively 2 weeks and 8 weeks after the operation for such application. Then, the treatment results were compared and observed histologically and his tometrically. Thereby, the following conclusions were obtained. 1. In the experimental group, a pattern was shown that from 2 weeks after the operation, vascular proliferation proceeded and osteogenesis proceeded through osteoblast infiltration, and at 8 week after the operation, ACS was almost absorbed, the amount of osteogensis was increased and many osteoid tissue layers were observed. 2. At 2 weeks after the operation, each amount of osteogenesis appeared to be 8.70.8 %, 13.62.3 % and 4.80.7 % respectively in the experimental group, the positive control group and the negative control group. Accordingly, it appeared to be higher in the Experimental group and the positive control group than in the negative control group, but there was no significant difference statistically (p<0.01). 3. At 8 weeks after the operation, each amount of osteogenesis appeared to be 62.26.1%, 17.42.5 % and 8.21.4 % respectively in the experimental group, the positive control group and the negative control group. Accordingly, it appeared to be substantially higher in the experimental group than in the positive control group and the negative control group, and there was a significant difference statistically (p<0.01). As a result of conducting the experiment, when ACS was used as a carrier for chitosan, chitosan showed effective osteogenesis in the perforated defective region of the Sprague-Dawley rat's calvarial bone.

• Journal of The Korean Association For Science Education
• /
• v.22 no.1
• /
• pp.110-121
• /
• 2002

In this study, the verbal interactions occurred during the CASE(Cognitive Acceleration through Science Education) activities in the middle school science class has been analyzed regarding with students cognitive level. The subjects were 24 students of 6 groups in a middle school in Korea. Verbal interactions within group discussions during CASE activities were audio-taped, transcribed, and analyzed. Also, classroom observation and interview with students were carried out. The results showed that the student with higher cognitive level tended to be a group leader. They had strong influences on the group discussions in each step of problem solving. Also, the higher cognitive level students were more active in metacognitive discussion and more often used scientific terms. When their group met difficulties in each stage of problem solving, such as perception of problem and designing experiment, the higher cognitive level students suggested some ideas to help their peers and gave them an explanation of how they worked. Low cognitive level students had difficulties in perception and solving the problem as compared with high cognitive students. It was common during activities for the low cognitive level students to fail to identify variables and to distinguish between dependent variables and independent variables. They failed to hold a number of variables at once. However, the metacognitive questions from their peers or teacher were helpful for them to construct the concept of controlling variables. If there is no student who has a high level of thinking in a group, it was necessary to intervene for teacher. A well judged questions from teacher created the cognitive conflict which causes the students to reconstruct their strategy for problem solving and reinforce the control of variables reasoning pattern. From the above results, it is concluded that students' cognitive levels are much related to the verbal interaction patterns. This suggests that teacher should consider individual student's cognitive level in organizing groups and intervene to facilitate the environment for metacognitive interaction.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.1
• /
• pp.51-61
• /
• 2020

Objectives : The purpose of this study is to investigate the effect of object size and reaching distance on kinematic factors of the upper limb while performing arm reaching for normal subjects. Methods : The subjects of this study were 30 university students who were in D university in Busan, and the measuring tool was CMS-70P(Zebris Medizintechnik Gmbh, Germany), a three-dimensional motion analyzer. The task had six conditions. The average velocity of motion, average acceleration, maximum velocity, and the velocity definite number of movements were measured according to changes in object size(2cm, 10cm) and reaching distance(15%, 37.5%, 60%) when they performed arm reaching. The general characteristics of the subject were technical statistics. One-way ANOVA measurement was used to compare variables when the arm reaching task was performed from two object sizes to three reaching distance, and the post-test was conducted with Tukey test. In addition, an independent t-test was used to analyze the kinematic differences according to the two object sizes at three reaching distances. A two-way ANOVA measurement (3×2 Two-way ANOVA measurement) was performed to identify the interaction of the reaching distance(15%, 37.5%, 60%) and the object size(2cm, 10cm). The statistical significance level α was set to .05. Results : When the size of the object increased, the velocity and maximum velocity also increased, but the definite number of velocity decreased. When the reaching distance increased, the velocity and maximum velocity increased, whereas the definite number of velocity decreased. Conclusion : The clinical significance of this study could be utilized as the baseline data for grading object size and reaching distances when the reaching training is implemented for patients whose central nervous system was damaged.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.111-119
• /
• 2019

The high-speed railway system is mainly composed of tunnel, bridge, and viaduct to meet the straightness needed for keeping the high speed up to 400 km/s. Seismic fragility for the high-speed railway infrastructure can be assessed as two ways: one way is studying each element of infrastructure analytically or numerically, but it requires lots of research efforts due to wide range of railway system. On the other hand, empirical method can be used to access the fragility of an entire system efficiently, which requires case history data. In this study, we collect the 2004 M_W 6.6 Niigata earthquake case history data to develop empirical seismic fragility function for a railway system. Five types of intensity measures (IMs) and damage levels are assigned to all segments of target system for which the unit length is 200 m. From statistical analysis, probability of exceedance for a certain damage level (DL) is calculated as a function of IM. For those probability data points, log-normal CDF is fitted using MLE method, which forms fragility function for each damage level of exceedance. Evaluating fragility functions calculated, we observe that T=3.0 spectral acceleration (SA_T3.0) is superior to other IMs, which has lower standard deviation of log-normal CDF and low error of the fit. This indicates that long-period ground motion has more impacts on railway infrastructure system such as tunnel and bridge. It is observed that when SA_T3.0 = 0.1 g, P(DL>1) = 2%, and SA_T3.0 = 0.2 g, P(DL>1) = 23.9%.

• Korean Journal of Health Education and Promotion
• /
• v.4 no.2
• /
• pp.46-70
• /
• 1987

The survey with questionnaire were conducted to grasp the actual condition of four cautious drugs-antibiotics, sedative hypnctics, mincr tranquilizer, analeptics-self -medication behavior through drugstore use and to analyze the primary factors connected with it. The following six objectives were established. 1) To catch the reason why the man who medicate himself buy four cautious drugs at a drugstore, and to know the choice motive of each drug purchased. 2) To grasp the distribution of four cautious drug taken by the man who medicate himself and to analyse the reason of taking the drug. 3) To find out whether the buyer has taken the same drug past and to know the duration and the frequency. 4) To grasp the degree of recognition about four cautious drugs and the attitude toward continuous taking them. 5) To analyze the degree of recognition about the influence on human body and the attitude of medication behavior. 6) To know "the experience of side-effects" and to grasp the kind of the side-effects. The data were collected from 15 drugstores with 677 respondents in seoul from August 17 to september 21, 1987. The following results were obtained. 1) The reasons for drugstore use were first, "for easy access and convenience" (53.7%) second, "for the slightness of illness" (19.9%) third "for the cheap price" (13.2%). According to that result, the factor of "the easy access of drugstore" was most influential. In case of the poor, the factor "for the cheap price "was revealed second (37.3%). And "for the slightness of illness" was second reason in the medically insured (22. 9%), "for the cheap price" was second reason in the others (29%). 2) The kind of drugs purchased were antibiotics (62.8%), analeptics(17.2%), minor tranquilizer(13.3%) and sedative hypnotics (6.7%) on the whole. In teenagers, besides antibiotics the percentage of taking analepits came second (42.4%) and it was revealed that the percentage of sedative hypnotics, minor tranquilizer increase with age. But in proportion to the increase of age, the taking of analeptis decreased. 3) The choice motives of each drug purchased were all different. In case of antibiotics "recommendation of pharmacist" was 39.6%, sedative hypnotics "recommendation of pharmacist" and "my own judgement", 28.9%, respectively, minor tranquilizer "my own judgement", 35.2%. and in case of analeptics "my oun judgement" was most common with 53.5%. 4) The reasons for taking drugs were as follows. antibiotics was taken for the inflammation mitigation of a wound and a swelling (38.5%), sedative hypnotics for the removal of insomnia (97.5%), minor tranquilizer because of restlessness and qloominess(39.3%), and analeptics for the shortening of sleeping hours (35.1%). 5) Those experienced in taking four cautious drugs were 78.2% on the average. It was revealed that antibiotics use duration was "from one week to one month" (38.9%), the frequency was "rarely" (62.1%), sedative hypnotics and minor tranquilizer; "More than three years", (35.7%, 30.4%), respectively, "Somtimes", (43.8%, 35%), respectively. analeptics ; "from one year to three years", (27.6%), "Sometimes", (42.7%). 6) In regard to the source of information in taking drugs, 35.3 percent of male were relied on "recommendation of pharmacist", 32.6 percent of female "my own judgement", There was a difference between below the middle school graduates and over the high school graduates Thease were relied on "recommendation of pharmacist" first, those "my own judgement" first. And "my own judgement" was the first source of specialist(40%), labours(41.4%), salesman(43.5%), and jobless men(36.8%), "recommendation of ralatives on friends" was the first source of students (30.4%), "recommendation of pharmacist" was the first soure of teachers, administrative office workers (39%) and housewives (40.7%). 7) The degree of recognition about four cautious drugs was as follows. "know a little" was (43.0%), "don't know" (30.2%), "know" (26.8%), respectively. In regard to the attitude toward continuous taking them, it was revealed that "I will take it according to circumstamces" was first (56.2%), " I will not take it as possible" was first(56.2%), "I dont know well" (12.9%), "I will take it continuously" (8.3%). 8) About the influence on human body, "if proper, it is effect" was common attitude toward antibiotics (43.6%), "Probably bad influence on the health" was first toward the other drugs (46.2%), In terms of the degree of observance to taking-time and dose of drugs, "suitably" was first (37.3%), "relatively correctly" second (27%), "correctly" (17%). 9) The percentage of four cautious drugs side-effects was 27.5 on the average. The kind of side-effects were eruption and urticaria (28.5%), heart acceleration and so forth. (25.4%), headache and Giddiness, dyspepsia (23%), respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.174-183
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (II).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.160-173
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (I).

• Progress in Medical Physics
• /
• v.14 no.1
• /
• pp.54-67
• /
• 2003

The voltage-dependence of N-type calcium current inactivation is U-shaped with the degree of inactivation roughly mirroring inward current. This voltage-dependence has been reported to result from a purely voltage-dependent mechanism. However, $Ca^{2＋}$-dependent inactivation of N-channels has also been reported. We have investigated the role of $Ca^{2＋}$ in N-channel inactivation by comparing the effects of $Ba^{2＋}$and $Ca^{2＋}$ on whole-cell N-current in rat superior cervical ganglion neurons. For individual cells in-activation was always larger in $Ca^{2＋}$ than in $Ba^{2＋}$ even when internal EGTA (11 mM) was replaced with BAPTA (20 mM). The inactivation vs. voltage relationship was U-shaped in both divalent cations. The enhancement of inactivation by $Ca^{2＋}$ was inversely related with the magnitude of inactivation in $Ba^{2＋}$ as if the mechanisms of inactivation were the same in both $Ba^{2＋}$ and $Ca^{2＋}$. In support of this idea we could separate fast ( ${\gamma}$ ～150 ms) and slow ( ${\gamma}$ ～ 2500 ms) components of inactivation in both $Ba^{2＋}$and $Ca^{2＋}$ using 5 sec voltage steps. Differential effects were observed on each component with $Ca^{2＋}$ enhancing the magnitude of the fast component and the speed of the slow component. The larger amplitude of fast component indicates that the more channels inactivate via this pathway with $Ca^{2＋}$ than with $Ba^{2＋}$, but the stable time constants support the idea the fast inactivation mechanism is identical in $Ba^{2＋}$and $Ca^{2＋}$. The results do not support a $Ca^{2＋}$-dependent mechanism for fast inactivation. However, the $Ca^{2＋}$-induced acceleration of the slowly inactivating component could result from a $Ca^{2＋}$-dependent process.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.98-104
• /
• 2011

Numerical simulation in exploration geophysics provides important insights into subsurface wave propagation phenomena. Although elastic wave simulations take longer to compute than acoustic simulations, an elastic simulator can construct more realistic wavefields including shear components. Therefore, it is suitable for exploration of the responses of elastic bodies. To overcome the long duration of the calculations, we use a Graphic Processing Unit (GPU) to accelerate the elastic wave simulation. Because a GPU has many processors and a wide memory bandwidth, we can use it in a parallelised computing architecture. The GPU board used in this study is an NVIDIA Tesla C1060, which has 240 processors and a 102 GB/s memory bandwidth. Despite the availability of a parallel computing architecture (CUDA), developed by NVIDIA, we must optimise the usage of the different types of memory on the GPU device, and the sequence of calculations, to obtain a significant speedup of the computation. In this study, we simulate two- (2D) and threedimensional (3D) elastic wave propagation using the Finite-Difference Time-Domain (FDTD) method on GPUs. In the wave propagation simulation, we adopt the staggered-grid method, which is one of the conventional FD schemes, since this method can achieve sufficient accuracy for use in numerical modelling in geophysics. Our simulator optimises the usage of memory on the GPU device to reduce data access times, and uses faster memory as much as possible. This is a key factor in GPU computing. By using one GPU device and optimising its memory usage, we improved the computation time by more than 14 times in the 2D simulation, and over six times in the 3D simulation, compared with one CPU. Furthermore, by using three GPUs, we succeeded in accelerating the 3D simulation 10 times.