• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.659-662
• /
• 1999

As utility pollution take a growing interest, ac/dc converter optimizing utility condition has been vigorously studied in decades. In this paper three phase DCM converter is analyzed and equations for average input currents are presented. Also relationships of voltage gain & duty according to angular velocity are presented and variable frequency controller is implemented using reset integrator which is designed in detail. In result power factor and THD characteristics of 3-stage and 4-stage operation ae compared respectively.

• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.78-82
• /
• 1998

In this paper, the authors propose a current control system of single phase PWM AC/DC converter without the source voltage sensors. The sinusoidal input current and unity effective power factor are realised based on the estimated source voltage in the controller. The estimations of source voltage are performed based on the reduced-order Luenberger observer using actual currents. The estimated source voltage is used to accomplish unity power factor. The proposed method is proved by simulations

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.129-131
• /
• 1993

Power conversion system of high performance requires high switching frequency power converter. In order to minimize commutation stress and switching losses, in this paper, AC-DC converter is embedded a partial resonant DC-Link circuit with the object of ZVCS(zero voltage switching and zero current switching). The partial resonant occurs just before converter switch operates. Thus, VA ratings of the elements and their dissipations due to effective series resistance (ESR) are very low. Some simulative results on computer are included to confirm the validity of the analytical results.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.441-442
• /
• 2015

본 논문에서는 HVDC(High voltage direct current) 시스템의 과도시 HVDC 제어 성능을 향상하기 위하여 일반적으로 수행하는 컨버터 제어방식을 변형한 제어 알고리즘을 제시하고자 한다. 제안하는 제어 알고리즘은 PSCAD/EMTDC를 이용하여 구현하였으며, AC계통의 고장을 모의하여 그 제어 효과를 보였다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.103-104
• /
• 2015

Solar energy has proven to be a potential clean energy source to help offset the large consumption of fossil. Nowadays, many research projects aim to enhance photovoltaic (PV) system performance and functionality. This research focuses on integrating self-monitor capability into dc-dc converters that control PV panels to detect a fault in series-connected PV cells, called hot spotting. A detection method using ac parameter characterization is proposed and its operation is examined through simulation.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.265-267
• /
• 1995

A voltage source PWM converter with battery charging and AC/DC power conversion ability is proposed in this paper. The proposed voltage source PWM converter is independently controlled by active and reactive components and implemented by DSP controller. In UPS application the mathematical model of the voltage source PWM converter has been derived. Finally, the performance of the voltage source converter is shown and discussed through experimental results.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.118-120
• /
• 2019

제안하는 논문은 3상 4선식 방식의 Interlinking Converter(ILC)를 사용하여 DC bus와 AC bus를 연계 한다. 역상분 성분은 정상분 성분과 다르게 전압 평형시 발생하지 않다가 전압 불평형시 발생하기 때문에 역상분을 추출하여 제어함으로써 불평형을 개선한다. Psim 시뮬레이션을 통해 본 논문의 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.177-178
• /
• 2018

본 논문에서는 직렬형 Hot-Swap ESS(Energy Storage System)를 구성하는 전력 변환 시스템에서 전류 센서의 옵셋 오차가 제어 성능에 미치는 영향에 대해 살펴보았다. 양방향 DC-DC 컨버터와 DC-AC 인버터에서 전류 센서 옵셋 오차의 영향에 대해 분석하고, 컴퓨터 모의 시험을 진행하여 그 특성을 파악하였다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.225-226
• /
• 2016

통상적으로, 기존 단상 AC 전원용 플라이백 컨버터는 75W 이상의 조건에서 역률개선회로를 채용하게 된다. 이에 따라 2-Stage 형태의 회로를 구성해야 하기 때문에, 회로의 부품 수 증가 및 전력 효율을 낮추는 단점이 동반된다. 또한, 다수의 자성소자(인덕터, 트랜스포머) 사용이 필수적이며, 이는 회로의 부피 및 원가 상승의 주요한 원인이 된다. 본 논문에서는 역률 개선 기능을 가진 밸리필 플라이백 컨버터의 실용적 설계 및 구현 방안을 제시한다. 더불어, 밸리필 정류기의 전해 커패시터 Short 시 방폭 문제를 해결하기 위한 OVP(Over Voltage Protection) 회로의 실용적 설계 방법을 제시하여 제안 회로의 양산 가능성을 증명한다. 본 논문에서는 제안 회로의 이론적 특성을 분석하고, 78W 급 플라이백 컨버터 시작품의 실험적 분석을 통해 그 타당성을 검증한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.685-688
• /
• 2015

A phase-shift full-bridge converter is widely used conventional converter. If the input power change in the variation of the output voltage, there is a time interval freewheeling according to a duty change. This is a factor of reducing the efficiency. In this paper, we propose a method for improving the efficiency of the converter/inverter systems that require high efficiency in the ESS. The proposed method was used for the duty control for solving the fail problem ZVS(Zero Voltage Switching) in Freewheeling interval. The proposed method was verified by experiments.