• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.164-165
• /
• 2010

본 논문은 PDP(Plasma Display Panel)용 전원 공급 회로 및 구동 회로에 관한 것으로써, 기존의 분리되어 있는 전원 공급 회로와 구동 회로를 통합한 새로운 방식의 PDP용 전원-구동 통합 회로를 제안한다. 제안 회로는 유지 전원부의 전력전달 기능과 X, Y 구동부의 전력회수 기능을 하나의 전력 변환 회로만으로 가능하게 하는 장점이 있다. 최종적으로 제안 회로의 이론적 분석 및 우수성을 검증하기 위해 42" HD PDP를 위한 시작품을 제작하여 고찰된 실험결과를 제시한다.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.1
• /
• pp.7-10
• /
• 2001

Ion induced secondary electron emission coefficients γ of protecting layers of an AC plasma display panel(AC-PDP) have been measured. In order to solve the surface charging effect during the measurement at insulating samples like MgO, a new method with the patterned gold line charge neutralization has been introduced. The measurement was performed at the samples, MgO and MgO+MgF$_2$, which showed a great difference in the firing voltage between the two protecting layers. The γ value has been compared with the firing voltage Vf of the AC-PDP with the same protecting layer. Correct relationship between γ and Vf has been observed. Thus, the patterned gold line method has been proven to be successful for the measurement of the secondary electron emission yield at insulator sample surfaces.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1688-1691
• /
• 2007

This paper shows that the boundary image sticking can be prohibited completely by using the vacuum sealing process, which means that the residual impurities such as nitrogen or oxygen can be a critical factor inducing the boundary image sticking. The production of boundary image sticking was checked in the test panel fabricated by the $N_2$ or $O_2$ flow during the vacuum sealing process. As a result, the boundary image sticking did not appear in the case of $N_2flow$, whereas the boundary image sticking was observed in the case of $O_2$ flow even though the test panel was fabricated by the vacuum sealing process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.734-738
• /
• 2003

The addressing time should be reduced by modifying cell and/or driving method in order to replace the dual scan system by single scan and increase the luminance in large ac plasma display panel(PDP). In this paper, the relationships between of discharge cell structure and addressing time in ac PDP are investigated. It is found out that the addressing time was decreased with decreasing gap of ITO electrode and thickness of transparence dielectric layer on the front glass. The decrease rates were 4% per $10{\mu}m$ and 4% per $5{\mu}m$, respectively. Also in cases of decreasing height of barrier rip and thickness of white dielectric layer on the rear glass, addressing times were at the rate of 4% per $10{\mu}m$ and 4% per $2{\mu}m$, respectively.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1818-1820
• /
• 2000

Due to recent technology advances, needs for flat panel displays, plasma display panels(PDPs) whose advantages are simple structure, high resolution, wide viewing angle is increasingly expected to be the first flat panel of large screen, walt hanging TVs. But the luminance and luminous efficiency of color PDP is net up to the level of a CRT. So, New electrode shape which is different from the conventional electrode has to propose to improve the luminance and luminous efficiency. In this paper, we suggested new shaped electrodes. In new shaped electrode, the discharge current was reduced compared with conventional type by reducing the unnecessary diffusion loss near the barrier rib. However, the luminance was nearly the same as conventional type. So, the luminous efficiency improved about 35%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.468-473
• /
• 2008

A MgO layer is used as electrode protective film in the alternating current plasma display panel (AC PDP). The properties of MgO layer are thought to be one of the most important factors that affects the panel reliability through the firing voltage variation. In this study, we investigated the relations between the surface characteristics and e-beam evaporation process parameters such as deposition rate, temperature of substrate and distance between the MgO pellet and substrate. To produce the MgO layer of (200) crystal orientation, we suggest the high temperature of the substrate, the long distance between the pellet and substrate and the high deposition rate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.13-17
• /
• 2006

We investigated the effect of sustain electrode gap variation with high Xe content in an ac Plasma Display Panel through two-dimensional numerical simulation to understand the inherent high luminous efficiency mechanism. For the low Xe content, the optimal sustain electrode gap turned out to be about 200 ${\mu}m$, but with higher Xe content, the VUV generation efficiency increased as the electrode gap increases beyond 200 ${\mu}m$. We found that it is due to higher electron heating efficiency in the cathode sheath under the condition of long electrode gap and high Xe content.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.329-332
• /
• 2003

The effects of an auxiliary address pulse driving scheme, in which an auxiliary short pulse was applied to the address electrode during a sustain-period, was examined under the various image patterns of the 42-inch WVGA ac-PDP. When the auxiliary address pulse driving scheme was applied, the luminance of the red, green and blue cells were measured respectively. The luminance, luminous efficiency and current were measured under the full-white pattern of the 42-inch ac-PDP. As a result, the luminance of blue cell was improved approximately by 17 %, whereas the luminous efficiency of the full-white pattern was improved approximately by 34 % without a misfiring discharge in comparison with conventional driving scheme.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.598-600
• /
• 2002

To improve the luminance and efficiency of AC PDP, the effects of a square pulse applied to the address electrode during a sustain-period is investigated. Through this experiment, we confirmed the improvement of luminance and efficiency. We performed the temporal behavior measurement for the light emitted from AC PDP at floating state of the address electrode and at various auxiliary voltages (including ground state) applied to the address electrode using the scanned point detecting system. In the case of using an auxiliary voltage pulse, emission starts at the inner edges of the anode and cathode simultaneously. Also, we obtained the larger two discharge volumes compared with the normal sustain discharge where address electrode is floated.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.11
• /
• pp.536-540
• /
• 2002

This paper proposes a method to drive an AC plasma display panel(PDP) with a significantly improved contrast ratio. In the proposed method, during the first sub-field of one frame, all PDP cells are reset by the ramp waveform, and during the other sub-field, only the cells turned on in the previous sub-field are reset. No light is emitted during the reset period of every sub-field except the first sub-field. For a 10-bit picture, the luminance of the dark level for the proposed method is 10 times lower than that for the conventional method, in which the ramp waveform for the reset is used in every sub-field. Accordingly, the contrast ratio for the proposed method is 10 times higher than that for the conventional method. For the 10-bit picture, the measured contrast ratio was about 3080:1 for the proposed method and about 285:1 with the conventional method, a result the contrast ratio has been increased in 10.8 times. This result shows that the proposed method can realize an image with high contrast ratio.