• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.726-728
• /
• 2004

In this paper, the gain of the observer is properly set up using the fuzzy control and Fuzzy-Sliding observer(FSQ) that have a superior transient characteristic and is easy to implement compared to the existing method is designed. It estimate the differentiation of the armature current directly using the armature current measured in the AC motor. It estimate the speed of the rotor using the differentiation. It is proposed speed sensorless control method using the estimated speed. Optimal gain of speed observer(Luenberger observer) was set up using the fuzzy control and adapted speed control of AC servo motor. To verify the performance of designed Fuzzy-Sliding observer, simulation compared with fixed speed observer gain of G.B Wang and S.S Peng's sliding observer is performed. Also, it was proved the excellence and feasibility of the proposed observer from the comparison test with a speed sensor and without a speed sensor which used a highly efficient drive and 400W AC servo motor starting system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.6
• /
• pp.551-557
• /
• 2006

The electrical frequency synchronized periodic torque ripple exits in the AC motor. There are various sources of torque ripple in AC motor such as current measurement error, dead time, etc. This paper proposes a compensation algorithm which suppresses undesired side effect known as the periodic torque ripple of AC motor. The torque ripple compensation classified as the speed ripple detector and torque ripple compensator. This paper proves a speed ripple minimization at steady state by analysis of torque ripple compensator. A new speed ripple detector improves the performance of torque ripple compensation algorithm. The simulation and experimental results show that the compensation algorithm is effective and the torque ripple compensation method improves the performance of speed ripple detector by eliminating torque ripples effectively.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.315-317
• /
• 2003

This paper deals with the position control of an AC servo motor using linear hall-effect sensors. The price of these is very low, but it is possible to make position control of motor similar to a control using an encoder. This paper introduces the design of motor using linear hall-effect sensors and shows the results of control.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.846-848
• /
• 1995

Recently, direct drive AC servo motor and DSP is widely used in the factory automation and related field due to the enhanced control and digital technology. In this paper, position control of direct drive AC servo motor and numerical interpolation algorithms are studied using DSP for the future applications. In the direct drived motor control, encoder pulse is divided into the quadruple pulse for the higher resolution and high speed pulse(10MHz) is used as reference for the slower speed motor control (M/T method). As for the general position control, PI controller is adapted for position control. In the trajectory tracking numerical algorithm, interpolation of straight line and curve algorithms are studied for the realization of path following capabilities of XY table. As for the DSP, ADSP 2105 is selected for the economy and performance points of view.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.294-301
• /
• 2016

Recently, the solar tracker has been used to improve the efficiency of solar energy. Solar tracking technologies are classified into the sensor-based method, the program-based method, and the hybrid method. Solar trackers using an AC motor and CdS sensor are low in cost, but the precision of the positions is low, owing to the inertia of the motor and the scattering of sunlight. To compensate for the low precision, we implement a CdS sensor module and propose an AC motor control method using error value. To evaluate the performance of the solar tracker, we implemented a solar water heater. From the experimental results, the solar tracker can achieve ${\pm}2mm$ accuracy for sun, can satisfy ${\pm}15mm$ as a limited error value, and provides a 32% performance enhancement in KSB8202 criteria.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.69-71
• /
• 2004

DC servo motors have a defect that they need a periodical maintenance because of a brush commutation and also they have a difficulty at high speed operation. In this reason, the use of AC Servo motors are increasing these days. In this paper, a proposed neuro observer is applied to speed control of AC servo motor. The proposed observer complement a problem that occur from increase of gain of High-gain observer in proportion to the square number of observable state variables. And also, the proposed observer can tune the gain obtained by differentiating observational error automatically by using the backpropagation training method to stabilize the observational speed. The excellence and feasibility of the proposed observer is proved by making a comparison test between the proposed observer and the others applied to the same AC servo motor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.4
• /
• pp.351-361
• /
• 1996

A variable structure controller is developed for an AC servo motor used in CNC milling machines. The designed controller is implemented as an outer loop controller to a factory designed motor-servopack system. The robustness parameter is tuned for a fast response when the speed tracking error is large, while it is tuned for small oscillations when the speed tracking error is small. The designed controller is installed on a CNC machine using a PC. Cutting experiments show improved performance over the factory-designed controller.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.69-71
• /
• 2005

DC servo motors have a defect that they need a periodical maintenance because of a brush commutation and also they have a difficulty at high speed operation. In this reason, the use of AC Servo motors are increasing these days. In this paper, a proposed neuro observer is applied to speed control of AC servo motor. The proposed observer complement a problem that occur from increase of gain of High-gain observer in proportion to the square number of observable state variables. And also, the proposed observer can tune the gain obtained by differentiating observational error automatically by using the backpropagation training method to stabilize the observational speed. The excellence and feasibility of the proposed observer is proved by making a comparison test between the proposed observer and the others applied to the same AC servo motor.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.199-204
• /
• 2000

Generally, The systems are so complex that it not possible to obtain reasonable model using physical insight. Also a model based on physical insight contains a number of unknown parameters even if the structure is derived from physical laws. To solve these problems, the systems identification is described in this paper. So, AC servo motor system which has both open loop and closed loop is selected as an example for identification. A state-space model of AC servo motor system is identified through open loop experiment and identified through closed loop experiment and using pole placement integral controller to open loop system. As the results, From ARMA model, We have obtained continuous-time state space model.

• Journal of Power Electronics
• /
• v.6 no.1
• /
• pp.67-72
• /
• 2006

This paper introduces two different types of AC current control methods for an indirect vector controlled induction motor using a matrix converter. The proposed methods combine the advantages of matrix converters with the advantages of the indirect vector AC current control methods. The first proposed method explains the basic idea of the hysteresis current control method for matrix converters and shows its capability and stability in comparison to the conventional method usually used for VSI. With the aid of the special configuration of the matrix converter, we also propose another current method which is modified from the first one in order to reduce both current ripple and torque ripple. Simulation results have verified the feasibility and the effectiveness of the proposed methods.