• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.396-399
• /
• 2006

AC-PDP를 위한 단일 서스테인 구동회로로서 단극성 전원을 이용하여 양극성 서스테인 파형을 출력할 수 있는 새로운 단일 전원 단일 에너지 회수 서스테인 구동회로를 제안한다. 제안하는 회로는 회로 구성이 간단하면서도 전원 공급 장치의 추가 부담 없이 단극성 전원장치를 그대로 사용하여 가스 방전 유지 전압 크기의 양전압 및 음전압의 양극성 파형을 생성할 수 있다. 또한 에너지 회수 회로를 이용하여 플로팅 캐패시터를 충전시키기 때문에 충전 돌입 전류가 발생하지 알아 스위치의 전류 스트레스를 줄일 수 있는 특징이 있다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.95-98
• /
• 2002

본 논문에서는 AC-PDP 구동에 있어 효율적이며, 패널 전압을 빠르게 상승시킬 수 있어 현재 많이 이용되는 ADS 구동 방식에 적합한 에너지 회수 회로를 제안한다. 제안된 회로는 기존의 LC 순수 공진의 방식을 적용하여 에너지를 회수하는 방식 Weber 회로와 비교하여 제한적인 유지 기간 동안 동작 여유 마진을 증가시킬 수 있고, 픽셀의 ON$\cdot$OFF 상태와 상관없이 효율을 증가시킬 수 있다. 제안하는 회로를 기존의 Weber 회로와 비교하여 동작원리와 특징들을 분석하고, 7.5 인치 PDP 시작품을 이용하여 제안하는 회로의 타당성과 우수성을 검증하였다.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1861-1868
• /
• 2016

In this paper, a three-phase AC-DC high step-up converter is developed for application to microscale wind-power generation systems. Such an AC-DC boost converter prossessess the property of the single-switch high step-up DC-DC structure. For power factor correction, the advanced half-stage converter is operated under the discontinuous conduction mode (DCM). Simulatanously, to achieve a high step-up voltage gain, the back half-stage functions in the continuous conduction mode (CCM). A high voltage gain can be obtained by use of an output-capacitor mass and a coupled inductor. Compared to the output voltage, the voltage stress is decreased on the switch. To lessen the conducting losses, a low rated voltage and small conductive resistance MOSFETs are adopted. In addition, the coupled inductor retrieves the leakage-inductor energy. The operation principle and steady-state behavior are analyzed, and a prototype hardware circuit is realized to verify the performance of the proposed converter.

• Clinics in Shoulder and Elbow
• /
• v.23 no.3
• /
• pp.159-165
• /
• 2020

Acromioclavicular (AC) joint dislocations account for about 9% of shoulder injuries. Among them, acute high-grade injury following high-energy trauma accounts for a large proportion of patients requiring surgical treatment. However, there is no gold standard procedure for operative treatment of acute high-grade AC joint injury, and several different procedures have been used for this purpose in clinical practice. This review article summarizes the most recent and relevant surgical options for acute high-grade AC joint dislocation patients and the outcomes of each treatment type.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.191-194
• /
• 1997

본 논문에서는 2D-DCT 변환된 동영상 프레임 사이의 오차 블록들의 활성 레벨(atcivity level)과 에지의 특성을 분류하여 동영상의 적응적인 양자화를 제안한다. 각 블록에서는 활성 레벨이 각기 다르고, 같은 활성 레벨이라 할지라도 에지의 특성도 각기 다르게 나타난다. 적응적인 양자화를 위해서, 2D-DCT 변환된 영상 오차의 각 블록의 활성레벨 뿐만 아니라 AC 계수들의 분포에 따른 에지 특성을 분류하면, 블록의 활성 레벨만을 일률적으로 적용한 Sorting 방법의 경우보다 향상된 영상을 복원할 수 있다. 블록의 활성 레벨은 AC energy에 의해서 측정하고, 에지 특성은 AC 계수들의 분포에 의해 결정하게 된다.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.263-267
• /
• 2011

The present paper proposes a novel cableless magnetic actuator with a new propulsion module that exhibits a very high thrusting force. This actuator contains an electrical inverter that directly transforms DC from button batteries into AC. The electrical DC-AC inverter incorporates a mass-spring system, a reed switch, and a curved permanent magnet that switches under an electromagnetic force. The actuator is moved by the inertial force of the mass-spring system due to mechanical resonance energy. The experimental results show that the actuator is able to move upward at a speed of 33 mm/s when using 10 button batteries when pulling a 10 g load mass. This cableless magnetic actuator has several possible applications, including narrow-pipe inspection and maintenance.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1226-1228
• /
• 2004

A novel lossless passive snubber is proposed for soft switching the boost type converters. The proposed snubber does not use any auxiliary switches. but uses two identical snubber capacitors which are charged in parallel at turn off of the main switch and discharged in series at turn on automatically, and the discharged energy is recovered effectively (more than $95[\%]$ recovery) into the output capacitor. Thus, the snubber provides zero voltage switching for the converter main switch, reducing both the turn off losses and the electromagnetic interference(EMI) noise, whitch improves the converter performance. The experimental results of a 20[kHz] 600[W] DC-DC boost converter and a single-phase AC-DC boost rectifier with the new snubber are presented.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.49-53
• /
• 2006

A high temperature superconductor (HTS) has been developed for power applications such as power cables, fault current limiters and superconducting magnetic energy storage devices. For such applications it is required to understand the DC voltage-current characteristic of the HTS. which is important in analyzing AC loss and flux flow loss quantitatively. In this work, we have experimentally investigated influence of several factors, e.g. critical current density. degradation and AC external magnetic field, on the DC voltage-current characteristic. The measured results have been discussed in engineering application point of view.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.138-144
• /
• 2017

With the increase in power consumption due to the surge in the demand for power, it is necessary to improve the quality or design of the power (supply) for the purpose of reducing the energy consumption and so reduce the power loss. The switchboard is a mechanical device that receives electricity from the electricity generation facilities of KEPCO and divides it into the facilities required for each building. Switchboards generally consist of enclosures, switches, power conductors, and control components. This study deals with energized power conductors, which constitute the main element in the switchboard. Through the measurement of the effective ac resistance, it was confirmed that the vertical array structure of the conventional type plate conductor is inefficient. If the effective AC resistance increases significantly, the sectional area of the conductor becomes relatively large due to the skin effect. In this study, we studied the energy and material savings that could be obtained using the asterisk (*) array structure, which minimizes the effective ac resistance by reducing the skin effect. The core technology principle of this study is the energy saving switchgear based on conductor resistance reduction technology utilizing the asterisk array structure. The present invention involves a plate-shaped conductor arrangement structure capable of canceling out the magnetic field generated on each of the plate conductors (rst or abc) of the AC power supply in the power distribution panel by mutual action. The effect of this structure is to reduce the amount of inductive reactance due to the increase in the cross-sectional area and reduction of the effective AC resistance.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.1-4
• /
• 2019

In this study, an anthracene cross-linker is introduced to enhance the catalytic activity of glucose oxidase (GOx) based catalysts and to increase the amount of enzyme loading. The crosslinked GOx is bonded with the CNT/PEI support using the electrostatic interaction (AC[CNT/PEI/GOx]). Electrochemical evaluations are done to evaluate the performance of this catalyst and the performance of CNT/PEI/GOx catalyst is also measured as a control. According to the measurements, it is confirmed that the amount of loaded GOx increases, while $K_m$ value calculated by Lineweaver-Burk plot shows that AC[CNT/PEI/GOx] ($K_m$ : 0.73 mM) is superior to CNT/PEI/GOx ($K_m$ : 1.71 mM) without cross-linking reaction. Based on these effects, it is demonstrated that the maximum power density of the enzymatic biofuel cell using AC[CNT/PEI/GOx] increases from $21.2{\mu}W/cm^2$ to $57.4{\mu}W/cm^2$.