• 제목/요약/키워드: AC coupling

검색결과 144건 처리시간 0.028초

전력케이블과 가스배관의 병행구간에 대한 교류부식 영향 (The Effects of AC Corrosion on Underground Gas Pipeline Running Parallel with High Power Cables)

  • 배정효;김대경;김기준
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제49권10호
    • /
    • pp.577-582
    • /
    • 2000
  • This paper analyze the interference problems, especially Ac corrosion when the gas pipeline is buried with power cable in the same submarine tunnel. This paper present the results of the study about interference mechanism(inductive coupling, conductive coupling, resistive coupling), AC corrosion, limitation of safety voltage, modeling of power cables, gas pipeline and grounding systems, analysis of induction voltage and optimal arrangement of power cables.

  • PDF

AWGN 채널환경에서 Direct-Conversion 수신기의 성능분석에 관한 연구 (A Study on a Performance Analysis of Direct-Conversion Receiver In Additive White Gaussian Noise Channel)

  • 조형래;김철성;박성진
    • 한국정보통신학회논문지
    • /
    • 제5권4호
    • /
    • pp.668-675
    • /
    • 2001
  • 최근, 상업적인 pcs시스템은 매우 발전되어 있으며, 결국 차세대 이동통신은 멀티미디어 서비스를 제공하는 IMT-2000에 의해 실현될 것이다. 그러므로 , 새로운 형태의 수신 시스템 연구가 활발히 진행되고 있고, 이중하나가 Direct conversion 방식이다 Direct conversion은 차세대 이동통신 시스템에 필요한 저전력, 소형, MMIC, 저가에 적합한 방식이다. 이 시스템을 사용할 경우 DC-offset의 문제가 발생하게 된다. DC-offset은 시스템에서 주파수 합성기의 누설신호에 의해 원하는 신호의 증폭을 억압한다. 본 논문에서 DC-offset을 제거하는 방법에 대해 고려한다. DC-offset의 제거법에는 AC-coupling, 대용량 capacitor, DC-feedback loop, DC-free coding의 4가지 방법이 있다. 이중에서 AC-coupling법은 가장 간단하며, DC-feedback법은 최고의 성능을 가진다. AC-coupling법과 DC-feedback법을 HP사의 ADS를 사용하여 시뮬레이션 하였다.

  • PDF

AC 및 DC 송전선로 과도상태 커플링 영향 분석 (The Study of Transient Coupling between AC and DC lines on the Same Transmission Tower)

  • 윤종수
    • 전기학회논문지
    • /
    • 제60권1호
    • /
    • pp.14-19
    • /
    • 2011
  • The implemetation of the AC and DC lines on the same transmission tower is an economical and practical approaching that increase the power transmission capacity of an existing transmission corridor. But, In this case, Inductive and capacitive coupling between AC and DC lines on the same tower should be investigated in advance. According to the installation plan of ${\pm}80kV$ 60MW bipole HVDC in Jeju island, KOREA that will be commissioned until 2011, DC lines will parallely operate with 154kV 2 AC lines in existed 154kV AC 4 lines transmission tower. This paper presents the transient analysis results about the interaction between 154kV AC and 80kV DC lines in the same transmission tower.

KSTAR PF 초전도자석의 크기 및 재료에 따른 결합손실 특성 분석 (Analysis of Coupling Loss with Size and Material in the KSTAR PF Superconducting Coils)

  • 이현정;추용;이상일;박영민;박현택;오영국
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제11권3호
    • /
    • pp.1-5
    • /
    • 2009
  • It is important to predict AC loss in $Nb_3Sn$ and NbTi cable-in-conduit-conductor (CICC) reliably for the design and operation of large superconducting coils. The hysteresis loss in the superconducting filaments and coupling loss within strands and among strands in a cable or composite are dominant ac losses in superconducting magnets. The coupling loss in a superconductor can be characterized by identifying the coupling constant time $n{\tau}$. To reduce the coupling loss, all the strands (superconductor and Cu) in KSTAR (Korea Superconducting Tokamak Advance Research) are chromium plated with thickness of $l{\pm}0.5{\mu}m$. The ac losses of PF1, PF5 and PF6 coils has been measured by calorimetric method while applying trapezoidal current pulses with various ramp rate from 0.5 kA/s to 2 kA/s. The coupling time constants for $Nb_3Sn$ coils are $25{\sim}55$ ms and the values are not co-related with the coil size, the time constants for NbTi coil is 30 ms.

수직 또는 수평으로 매설된 접지전극의 접지임피던스 측정시 보조전극 위치에 따른 전자유도의 영향 (Effects of Ac Mutual Coupling According to Location of Auxiliary Electrodes In Measuring the Ground Impedance of Vertically or Horizontally Buried Ground Electrode)

  • 최영철;최종혁;이복희;전덕규
    • 조명전기설비학회논문지
    • /
    • 제23권8호
    • /
    • pp.86-92
    • /
    • 2009
  • 접지임피던스의 측정에서는 교류의 전자유도결합을 최소화시키기 위해 보조전극을 직각으로 설치하며, 측정공간이 제한되는 경우 대안적 방법이 적용되고 있다 이때 접지임피던스의 측정에서는 교류 상호결합과 도전유도에 의한 측정오차를 검토할 필요가 있다. 본 논문에서는 수직 또는 수평으로 매설된 접지극의 접지임피던스를 측정할 때 전류와 전위보조전극의 위치에 따른 측정의 정확도에 관한 것으로 전자유도결합에 의한 측정오차를 평가하였다. 결과적으로 교류 전자유도의 영향을 수직 접지극보다 수평접지극의 경우 크게 나타났으며, 교류 전자유도결합에 의한 측정오차는 전류와 전위보조선이 평행하게 배치되는 경우 가장 크게 나타났으며, 결국 61.8[%]법은 접지임피던스측정에는 부적합하다. 이론적으로 전류와 전위보조전극을 90[^{\circ}]$로 배치하면 전자유도결합은 나타나지 않는다. 측정공간의 제한으로 전류와 전위보조전극을 90[^{\circ}]$로 배치할 수 없는 경우 전자유도에 의한 오차를 저감시키기 위해서는 보조전극을 예각보다는 둔각으로 배치하는 것이 바람직하다.

AC/DC 선로 커플링에 따른 정상상태 영향 분석 (The Study of Steady-State Interaction Between AC/DC Line Coupling)

  • 천이경;박성진;이욱화;정용호;윤종수;문형배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.230-231
    • /
    • 2011
  • 본 논문은 2011년 제주계통 한림변전소와 금악변환소 사이에 설치 예정인 ${\pm}80kV$ 60MW HVDC 시스템의 DC 가공선로를 기존의 AC 송전 철탑의 AC 선로와 병렬로 추가하여 운영할 때 선로 Coupling에 따른 정상상태 영향을 분석한 내용이다. 한림변전소와 금악변환소 사이 철탑 17개의 데이터를 기반으로 송전선로를 모델링함으로써 실제 데이터에 최대한 근접할 수 있도록 정확성을 도모하였으며, 모델링과 분석에 있어서 전자계과도현상 해석프로그램인 PSCAD를 이용하였다. 특히 AC 병렬 연계 유무에 따른 DC 전류 주파수를 비교함으로써 AC/DC Coupling의 영향을 분석하였으며 최종적으로 이에 따른 기본파 성분 제거에 필요한 DC 필터 설치 유무에 관한 결론을 도출하였다.

  • PDF

DC-Offset 간섭환경에서 AC-Coupling을 갖는 직접변환 수신기의 성능 (Performance of Direct-Conversion Receiver with AC-Coupling in DC-Offset interference environment)

  • 성봉훈;송윤정;김영완;김내수;서종수
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2002년도 정기총회 및 학술대회
    • /
    • pp.9-14
    • /
    • 2002
  • Direct-conversion receiver(DCR) architecture has superior advantages in size, cost, and power over superheterodyne receiver architectures. However, the use of direct-conversion receiver architecture has been limited due to the direct-current offset noise. The ac coupling, which is used to overcome the direct-current offset noise, causes an inter-symbol interference(ISI), whose effects can be effectively mitigated using an equalizer. In this paper, the performance of a direct-conversion receiver with ac coupling in the presence of direct-current offset is analyzed via computer simulation. The simulation result shows that by using decision feedback equalizer with LMS(Least Mean Square) algorithm, signal-to-noise ratio loss of the direct-conversion receiver compared to the idea receiver can be reduced to less than 1㏈ for corner frequencies as large as 10% of the symbol rate.

  • PDF

유체 충격 압력 측정용 압전 센서 특징 (Characteristics of Piezoelectric Sensor for Fluid Impact Pressure)

  • 최영명;김현이;박준수;권순홍;김동진
    • 한국해양공학회지
    • /
    • 제23권6호
    • /
    • pp.17-22
    • /
    • 2009
  • This study presents an investigation of the characteristics of piezoelectric sensors whose main utilization is to measure impact pressure. The piezoelectric sensors were tested from several points of view. Their characteristics were investigated for repeatability, the effect of the diameter, temperature effect, water purity, flush mounting, and AC and DC coupling. Out of these, it was revealed that the temperature effect is very significant. The characteristics of the AC and DC coupling are also very important in understanding the time history of the impact pressure.

Effect of Amino Silane Coupling Agent on the AC Electrical Breakdown Phenomena of Epoxy/Layered Silicate Nanocomposite in Needle-plate Electrodes

  • Park, Jae-Jun
    • Transactions on Electrical and Electronic Materials
    • /
    • 제13권3호
    • /
    • pp.149-152
    • /
    • 2012
  • The effects of amino silane coupling agent on the AC electrical treeing and breakdown behaviors in an epoxy/layered silicate (1 wt%) were examined in needle-plate electrode geometry. A layered silicate was exfoliated in an epoxy base resin by using our AC electric field apparatus. To measure the tree initiation and propagation and the breakdown rate, an alternating current (AC) of 10 kV (60 Hz) was applied to the specimen in needle-plate electrode arrangement with a $30^{\circ}C$ insulating oil bath. In the epoxy/amino silane system, the tree initiation time was 11.5 times higher and the breakdown time was 17.9 times higher than those of the neat epoxy resin. The tree initiation time in the epoxy/layered silicate (1 wt%) system with the amino silane was 2.0 times higher, and the breakdown time was 1.5 times higher than those of the epoxy/layered silicate (1 wt%) system.

AC 및 DC 송전 선로 병렬 연계에 따른 정상상태 커플링 영향 분석 (The Study of Steady-State Interaction Between AC and DC Lines on the Same Transmission Tower)

  • 윤종수
    • 전기학회논문지
    • /
    • 제59권7호
    • /
    • pp.1221-1225
    • /
    • 2010
  • The application of the AC and DC lines on the same transmission tower is an economical and practical approaching that increase the power transmission capacity of an existing transmission corridor. But, In this case, Inductive and capacitive coupling between AC and DC lines on the same tower should be investigated in advance. According to the installation plan of 80kV ${\pm}$60MW bipole HVDC in Cheju, KOREA that will be commissioned until 2011, DC lines will parallely operate with 154kV 2 AC lines in existed 154kV AC 4 lines transmission tower. This paper presents the steady state analysis results about the interaction between 154kV AC and 80kV DC lines in the same transmission tower.