• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.142-144
• /
• 2020

본 논문은 액티브 클램프 포워드 컨버터(ACFC)에 적용 가능한 경부하 조건 효율 최적화 제어 기법을 제안한다. 기존의 액티브 클램프 포워드 컨버터는 경부하 조건에서 과도한 프리휠링 전류로 인해 큰 도통 손실이 발생하여 높은 효율을 기대하기가 어렵다. 제안하는 제어 방식은 복잡한 추가 회로 없이도 전도 손실을 줄이면서 경부하 효율을 유의미하게 개선할 수 있다. 제안하는 제어 방식의 실현 가능성 및 성능은 범용 AC 입력 및 65W 최대 출력에서 설계된 USB PD 어댑터 프로토타입 회로 구성을 통하여 실험 검증된다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.61-63
• /
• 2020

본 논문에서는 2개의 브러쉬리스 AC 모터로 구동하는 레일 트랙션 시스템의 설계와 위치제어 방법을 제시한다. 제안된 시스템의 설계에서 롤러와 레일 사이의 미끄러짐 효과를 줄이기 위해 롤러가 레일의 상단 표면에 위치하는 구조로 설계하였다. 레일의 지지대가 상단 중앙에 위치해 있어 두 개의 날개 형태로 롤러가 제작되었으며, 각각의 롤러는 BLAC 모터와 연결되어 있다. 위치제어의 성능을 높이기 위해 코사인 가감속 패턴을 활용하여 구동 시 전류와 속도의 리플을 억제한다. 두 모터의 비선형적인 부하에 의한 밸런스오차를 줄이기 위해 실시간 위치 변화의 밸런스 제어를 제안한다. 제안된 듀얼 BLAC 모터로 구동하는 트랙선 시스템의 위치제어성능은 비교실험을 통해 검증되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.360-369
• /
• 2008

The solar cells should be operated at the maximum power point because its output characteristics were greatly fluctuated on the variation of insolation, temperature and load. It is necessary to install an inverter among electric power converts by means of the output power of solar cell is DC. The inverter is operated supply a sinusoidal current and voltage to the load and the interactive utility line. In this paper, the proposes a photovoltaic system is designed with a step up chopper and single phase PWM voltage source inverter. Synchronous signal and control signal was processed by one-chip microprocessor for stable modulation. The step up chopper is operated in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature for solar cell has typical dropping character. The single phase PWM voltage source inverter is consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be develop continuously by connecting with the source of electric power for ordinary using. It can be cause the efect of saving electric power, from 10 to 20%. The single phase PWM voltage source inverter operates in situation, that its output voltage is in same phase with the utility voltage. The inverter are supplies an ac power with high factor and low level of harmonics to the load and the utility power system.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.338-342
• /
• 1999

We simulated the current limiting characteristics of resistive and inductive SFCLs with 100 ${\omega}$ of impedances for a single and double line-to-ground faults in the 154 kV grid between two substations nearby Seoul. The transient current at the faults includes not. only high AC current up to 44 kA but also significant DC component as high as 4 kA. The DC current is greater and lasts longer for the double line-to-ground fault than for the single line-to-ground fault. The inductive SFCL limited the fault current more effectively than the resistive one. The DC component, however, was greater and diminishes slower for the inductive SFCL than for the resistive one.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.195-200
• /
• 2020

With the growing interest in fossil fuel depletion and environmental pollution, railroad cars operating in Korea are in progress as the conversion from diesel to electric vehicles expands. The photovoltaic system, which is applied as an example of the conversion of electric vehicles, is infinite and pollution-free, and can produce energy without generating hazards such as air pollution, noise, heat, and vibration, and maintain fuel transportation and power generation facilities. There is an advantage that is rarely needed. However, the amount of electricity produced depends on the amount of solar radiation by region, and the energy density is low due to the power generation of about 25㎡/ kWp, so a large installation area is required and the installation place has limited problems. In view of these problems, many studies have been applied to fuel cells in the railway field. In particular, the plan to link the fuel cell power generation system railroad power supply system must be linked to the power supply system that supplies power to the railroad, unlike solar and wind power. Therefore, it has a close relationship with railroad cars and the linkage method can vary greatly depending on the system topology. Therefore, in this paper, we study the validity through simulation modeling related to linkage analysis according to system topology.

• Journal of the Korean Society of Safety
• /
• v.11 no.2
• /
• pp.150-159
• /
• 1996

In this paper, an A-team(Asynchronous Team ) based approach for Reactive power and volage control considering static security assessment in a power system with infrastructural deficiencies is proposed. Reactive power and voltage control problem is the one of optimally establishing voltage level given several constraints such as reactive generation, voltage magnitude, line flow, and other switchable reactive power sources. It can be formulated as a mixed-integer linear programming(MILP) problem without deteriorating of solution accuracy to a certain extent. The security assessment is to estimate the relative robustness of the system in Its present state through the evaluation of data provided by security monitoring. Deterministic approach based on AC load flow calculations is adopted to assess the system security, especially voltage security. A security metric, as a standard of measurement for power system security, producting a set of discrete values rather than binary values, is employed. In order to analyze the above two problems, reactive power/voltage control problem and static security assessment problem, in an integrated fashion for real-time operations, a new organizational structure, called an A-team, is adopted. An A-team is an organization for agents which ale all autonomeus, work in parallel and communicate asynchronously, which is well-suited to the development of computer-based, multi-agent systems for operations. This A-team based approach, although it is still in the beginning stage, also has potential for handling other difficult power system problems.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.99-104
• /
• 2022

Recently, the domestic demand for weapon systems based on aircraft platforms is gradually increasing. In particular, the demand for effective precision guided missile(PGM) which cruises for several hundred kilometers after launch to strike the ground target is rising drastically, but it is in the early stages of development, and research based on it are limited. This paper is a study on the power converter unit(PCU) within PGM which is mounted on an aircraft platform based on MIL-STD-1760, which is an interface between an aircraft and PGM. We investigated the electrical properties and structure of the umbilical connector, and the aircraft/store electrical interconnection system. Also, the focus on the design specifications of the PCU that supplies power were described. This result 3 phase AC input, which is the state for the guided simulation power supply in the state of being mounted on an aircraft that rectification method with power factor correction(PFC) compared to bridge rectifier circuit. In the future, it may be used as a basis for power supply design on aircraft mounted weapon systems.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.113-127
• /
• 2021

Although planning techniques linking parks, green areas, and waterways have become common, there are frequent disruptions in the operation and management of landscape-use artificial channels (LuAC). Therefore, this study examined a design to promote the sustainable management and operation of a LuAC using rainwater for the streamlets of the Jeonju-Wanju Innovative City. In order to accomplish the purpose of this study, scenarios were set up by dividing the design into waterhead and waterway portions. First, the scenario regarding the waterhead was analyzed to calculate the water supply and storage required for the waterway and waterhead. The analysis showed that the waterway requires a water supply of 676.8 tons/months, 3,018 tons to 5,512 tons of storage space, and a water depth of 0.75 m to 1.37 m considering the ecological and landscape aspects. The second scenario is to select an effective system of facilities for the operation and management of the LuAC. To accomplish this, a single-circulation system (SCS), which transports water to a highland location was compared to a multi-circulation system (MCS), which supplied water separately to each water space and operated independently. The results showed that the MCS, which was operated independently by small power units, was more effective owing to the vast difference in water supply operation times.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.156-161
• /
• 2004

In this research, we used discharge tube without dielectric bead or with dielectric beads(SiO$_2$, $Al_2$O$_3$, or ZrO$_2$), and discharge in water at High-voltage pulse$.$DC power supply for removal of Escherichia coli. At the result of experiments, the removal characteristics of Escherichia coli appeared relation ratio to input voltage. Because, the electric field of discharge tube is increased when input voltage is increased. And, discharge tube used dielectric bead(ZrO$_2$), the removal characteristics of Escherichia coli was better than cases of else. And discharge used DC Power, the removal characteristics of Escherichia coli was better than AC Pulse Power.

• The Journal of the Korea Contents Association
• /
• v.17 no.11
• /
• pp.9-17
• /
• 2017

In this paper, we propose a method to develop a multimeter which is used for measuring electric signals in industrial field by using battery and display of smart phone. Most of the multimeters that are linked to existing smartphones are connected to Bluetooth, which is inconvenient for battery use and low in measurement accuracy. To improve this, we developed smart multimeter that can supply power and data at the same time by USB OTG method which can be used by sharing the power of smartphone. We also developed a smart multimeter that can measure resistance, DC voltage, current, AC voltage and current. Developed an Android app with a button that displays measurement data and can select the type of electric signal to be measured, and tests whether the manufactured system is operating normally or not. Respectively.The results of this study confirm that it is possible to fabricate a smart meter that has equal or better performance compared to existing instruments and does not require a separate power source or display, and it is expected to be a reference for the development of various smart instruments in the future.