• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.174-177
• /
• 2005

Offline switching power supplies have high voltage and high current switching waveforms that generate Electromagnetic Interference(EMI) in the form of both conducted and radiated emissions. Consequently, all off-line power supplies must be designed to attenuate or suppress EMI emissions below commonly acceptable limits. Electrodeless fluorescent lamp's ballasts have AC/DC flyback converter, so we must control the EMI emissions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.147-150
• /
• 2002

HPSL(High Pressure Sodium lamp)have attracted much attention in recent years, because they offer high luminous efficiency and very long life. Recently, AC-DC converters have been widely as power factor improvement circuits in the power conversion equipment An application of the ZVT-PWM(Zero Voltage Transition Pulse Width Modulation) boost converter, which has great advantage on miniaturization and high power density, to the power factor improvement circuit of the HPSL inverter are described to identify the power factor correction characteristics of the inverter. In this paper the series-parallel resonant inverter(electronic ballast) for driving a HPS lamp is discussed. Finally, a power factor corrector is cascaded in front of the electronic ballast. Consequently, a high power factor above 0.99 and low THD on the line current can be achieved.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.217-221
• /
• 2006

Offline switching Power supplies have high voltage and high current switching waveforms that generate Electromagnetic Interference(EMI) in the form of both conducted and radiated emissions. Consequently, all off-line power supplies must be designed to attenuate or suppress EMI emissions below commonly acceptable limits. Electrodeless fluorescent lamp's ballasts have AC/DC flyback converter, so we must control the EMI emissions.

• 한국전자통신학회논문지
• /
• 제6권5호
• /
• pp.643-648
• /
• 2011

본 연구에서는 공항, 철도, 항만 등 대형 교통수단의 표시등으로 사용하기 위하여 SMPS에 의하여 구동되는 LED 신호등을 설계하고 제작된 LED 신호등의 전기적 특성과 EMI 특성을 조사하였다. 10V 이상의 교류 및 직류입력전압에 대한 출력전류는 1.67A이었다. 0.15~30MHz에서 측정한 잡음단자전압은 허용기준 준첨두치와 허용기준 평균치 보다 낮았으며, 30~1000MHz에서 측정한 잡음전계강도는 59.96MHz에서 $23.96dB{\mu}V/m$이었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.210-212
• /
• 2018

A new switching mode has been proposed to obtain high power factor and low THD in single stage AC-DC converter. The conventional voltage mode control in critical conduction mode distorts input current shape with poor THD in flyback topology. Once TRIAC dimmer is connected, visible flicker in the LED lamp is easily detected due to a lack of TRAIC holding current near the input voltage zero cross. The newly proposed method can shape the input current by providing a desired reference voltage so that low THD is obtained by ideal sinusoidal input current in case of no dimmer connection and flat input current performs good TRIAC dimmer compatibility in phase-cut dimming condition. To confirm the validity of the proposed method, theoretical analysis and experimental result from 8W dimmable LED lighting system are presented.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.42-48
• /
• 2016

Light-emitting diode (LED) drivers are recently replacing fluorescent lamps; these drivers can operate adaptively with various ballasts without modifying and removing such ballasts. To satisfy these trends, a LED driver that is compatible with both electronic and magnetic ballasts is proposed in this study. Unlike conventional LED drivers, the proposed driver has a ballast recognition circuit and a mode selection circuit to operate ballasts at optimal conditions. Therefore, it features low voltage stress, high efficiency, and good compatibility with both electronic and magnetic ballasts. Moreover, it can be compatible with a wide selection of ballasts from various manufacturers. To confirm the validity of the proposed LED driver, results of the theoretical analysis and experimental verification performed on a 15 W-rated prototype are presented.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권1호
• /
• pp.23-29
• /
• 1995

본 논문에서는 고압방전등 전자안정기의 제작시 발생하는 음향공진 현상을 방지하기 위해서 방전등에 55.5[Hz]구형파를 인가하였고, 이 경우 방전등의 부저항특성 및 방전등의 시동특성에 효과적으로 대응하기 위해 인버터에 공급되는 전원을 정전류 쵸핑에 의한 DC전압으로 하였다. 설계된 전자안정기는 220[V]AC전원 전압을 정류하고, 스위칭 주파수가 30[kHz]인 정전류 쵸핑으로 방전등의 관전압에 맞는 DC전압을 인버터에 공급하며, 인버터에서 55.5[Hz]의 구형파를 방전등에 인가하도록 설계하였다. 설계한 전자안정기를 제작하여 실험한 결과, 비교된 재래식 안정기보다 효율이 향상되고, 플리커현상이 발생하지 않으며, 방전등 시스템의 정전력화 및 조광기능을 갖추고 있어서 탁월한 실용성을 입증하였다. 제작한 전자안정기의 용량은 300[W] 입력전압은 220[V]이며, 실험에 사용한 램프는 정격전력이 300[W]이며 관전압 135[V] 관전류는 2.0[A]로서 측정하였다.