• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.519-524
• /
• 2004

This study is concerned with the braking distance estimation using frictional energy rate. First, steady state rolling analysis is performed, and using this result, the braking distance is estimated. Dynamic rolling analysis during entire braking time period is impratical, so that this study divides the vehicle velocity by 10km/h to reduce the analysis time. The multiplication of the slip rate and the shear stress provides the frictional energy rate. Using frictional energy rate, total braking distance is estimated, In addition, ABS(Anti-lock Brake System) is considered, and two type of slip ratios are compared, One is 15% slip ratio for the ABS condition, and the other is 100% slip ratio which leads lo the almost same braking distance as the elementary kinematic theory. A slip ratio is controlled by angular velocity in ABAQUS/Explicit, A 15% slip ratio gives the real vehicle's braking distance when the frictional energy occurred al disk pad is included. Disk pad's frictional energy rate is calculated by the theoretical approach.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.72-80
• /
• 2013

This study is to develop and evaluate an AFS and an ARS controllers to enhance lateral stability of a vehicle. A sliding mode control (SMC) and a fuzzy logic control (FLC) methods are applied to calculate the desired additional steering angle of AFS equipped vehicle or desired rear steer angle of ARS equipped vehicle. To validate AFS and ARS systems, an eight degree of freedom, nonlinear vehicle model and an ABS controllers are also used. Several road conditions are used to test the performances. The results showed that the yaw rate of the AFS and the ARS vehicle followed the reference yaw rate very well within the adhesion limit. However, the AFS improves the lateral stability near the limit compared with the ARS. Because the SMC and the FLC show similar vehicle responses, performance discrimination is small. On split-${\mu}$ road, the AFS and the ARS vehicle had enhanced the lateral stability.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3326-3333
• /
• 2012

본 연구에서는 이 분야의 효과적인 공학기술교육을 위하여 능동형 교육용 시뮬레이터를 개발하였다. 개발된 시스템은 주행조건 제어 및 모니터링 시스템, 섀시 전자제어 시스템 모니터링 및 분석시스템, 가상 시뮬레이터 및 교육용 콘텐츠로 구성되어 있다. 여기서 주행조건 제어 및 모니터링 시스템은 다시 실차 시뮬레이터와 유압장비 및 원격제어 및 모니터링 시스템으로 구성되어 있다. 섀시 전자제어 시스템 모니터링 및 분석 시스템에서는 Labview 프로그램을 통하여 각종 센서와 액추에이터들의 동작상태를 모니터링 할 수 있도록 하였다. 그리고 가상 시뮬레이터 및 교육용 콘텐츠는 2D 플래시 및 3D 애니메이션으로 효과적인 교육의 멀티미디어 교육 자료를 제공하여 준다. 이러한 시스템은 교육용 뿐만 아니라 관련 분야 시스템의 모듈 연구 개발 시 성능 분석 장비로써의 활용도 가능할 것이다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.14-19
• /
• 2012

On-line and real-time information of the longitudinal velocity is the essential factor for the Advanced Vehicle Control Systems such as ABS(Anti-lock Brake System), TCS(Traction Control System), ESC (Electronic Stability Control) etc. However, the longitudinal velocity cannot be easily measured or calculated during braking maneuvering. A new algorithm is presented for the estimation of the longitudinal velocity with the measurements of the vehicle longitudinal/lateral acceleration, steering angle and yaw rate. The algorithm is designed utilizing the Extended Kalman Filter based on the 3 degree of freedom vehicle model. In order to compensate for the biased sensor signal on the inclined road, the inclined angle is also estimated. The performance of the proposed estimation algorithm is evaluated in field tests.