• 한국세라믹학회지
• /
• 제44권10호
• /
• pp.537-541
• /
• 2007

Microwave dielectric properties of $0.95 Ca_{0.85}Nd_{0.1}TiO_3-0.05LnAlO_3$ (Ln=Sm, DH, Er) were investigated as a function of sintering temperature and lanthanide ion type. A single perovskite phase with an orthorhombic structure was obtained throughout the entire range of composition. The dielectric constant (K) was dependent upon the dielectric polarizabilities and the B-site bond valence in the $ABO_3$ perovskite structure. The quality factor (Qf) of the specimens with $ErAlO_3$ was smaller than those with $SmAlO_3\;and/or\;DyAlO_3$ due to the smaller grain size. The temperature coefficient of resonant frequency (TCF) could be controlled from $107.28ppm/^{\circ}C$ at Ln=Sm to $87.23ppm/^{\circ}C$ at Ln=Er due to the changes of B-site bond valence in the $ABO_3$ perovskite structure.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.29.2-29.2
• /
• 2011

B-site substitution with isovalent and donor impurities was compared in terms of the piezoelectric properties of Bi-based ABO3 perovskite ceramics. X-ray diffraction study revealed that both impurities bring about degradation in their ferroelectric properties as well as piezoelectric characteristics. However, there existed a difference between the isovalent and heterovalent impurities that influence a phase transformation of ferroelectric anisotropic-to-electrostrictive pseudocubic symmetry. Based upon analyses including the crystal, microstructure, dielectric, ferroelectric properties, we believed that A-site vacancies in the ABO3 ceramic significantly contribute to a ferroelectric-nonpolar phase transition, which give rise to lead to a giant strains. The present paper will discuss the origin of giant strains in Bi-based perovskite ceramics.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.649-655
• /
• 2013

페롭스카이트 촉매와 Mo, Bi를 기본으로 하는 복합 산화물 촉매를 이용하여 천연가스의 주성분인 메탄의 부분산화를 통하여 메탄올을 직접 합성하였다. 페롭스카이트($ABO_3$) 촉매는 A 및 B site 성분을 변화시키면서 사과산법으로 제조하였으며, Mo, Bi를 기본으로 하는 3성분계 복합 산화물 촉매는 공침법으로 제조하여 반응특성을 살펴보았다. 페롭스카이트 촉매에서 A site에 알칼리 금속인 Sr을, B site에 전이금속인 Cr을 도입한 $SrCrO_3$ 촉매가 $400^{\circ}C$에서 메탄올 선택도 11%로 가장 우수한 결과를 보였다. Mo, Bi를 기본으로 하는 3성분계 복합 산화물 촉매의 경우 모든 촉매에서 메탄 전환율에는 큰 차이를 보이지 않았으며, Cr을 첨가한 Mo-Bi-Cr 복합 산화물 촉매가 $400^{\circ}C$에서 메탄올 선택도 15.3%로 가장 우수한 결과를 나타냈다. 3성분계 복합 산화물 촉매에서 촉매의 활성과 메탄올 선택도는 촉매의 표면적에 정비례하였다.

• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.272-277
• /
• 2007

Catalytic activity changes of perovskite catalysts were examined with their A-site substitution. For the preparation of catalysts, Mn was used for B-site component and La, Ce, Sr, Ba, Ca, Ag were used for A-site component of the perovskite $catalysts(ABO_3)$ The effect of calcination temperature on methane combustion and perovskite structure was also investigated. The surface area and adsorbed oxygen species were tested with BET apparatus and $O_2-TPD$, respectively. Perovskite catalysts whose A-site was partially substituted needed higher calcination temperature than un-substituted one to form the perovskite structure. From $O_2-TPD$ experiment, it was found that methane combustion activity was directly related to the oxygen desorbing ability of the catalysts. The prepared catalyst(LM-7) was stable at $600^{\circ}C$ for 72 hours of reaction.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.67-73
• /
• 2007

Methane combustion over perovskite catalysts was investigated. For the preparation of catalysts, Co, Mn, Fe, and Ni were used as B-site components of the perovskite catalysts $(ABO_3)$ and La was used as A-site component. The effect of calcination temperature on methane combustion and perovskite structure was also investigated. The structure of perovskites, surface area, and adsorbed oxygen species were tested with XRD, BET apparatus, and $O_2-TPD$, respectively. The formation of perovskite structure was affected by the calcination temperature. The catalyst desorbing oxygen at a lower temperature showed better activity for the methane combustion, therefore, the oxygen species desorbing at lower temperatures is responsible for the methane combustion.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.290-296
• /
• 2008

$AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structures which have been reported as proton conductors over $600^{\circ}C$ were studied. The $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structure is known to be more easily synthesized and has better stability than normal $ABO_3$ perovskite structure. And it is stable at about $800^{\circ}C$ in the $CO_2$ atmosphere, whereas the $BaCeO_3$ perovskite is easily decomposed into carbonate. In addition, this $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structure could simply produce oxygen vacancies within their structure not by introducing additional doping oxides but by just controling the molar ratio of $B'^{+3}$ and $B"^{+5}$ metal ions in the B site. Hence it is easy to design the structure which shows highly sensitive electrical conductivity to humidity. In this study, the single phase boundary of $BaR_{0.5+x}Ta_{0.5-x}O_{3-{\delta}}$(R = rare earth) complex perovskite structures and it's phase stability were investigated with changes in composition, x. And the humidity dependance of electrical conductivity at different $P_{H2O}$ conditions was investigated.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.97.2-97.2
• /
• 2007

• 대한화학회지
• /
• 제40권9호
• /
• pp.607-614
• /
• 1996

$ABO_3$계 perovskite 구조에서 A자리의 $Pb^{2+}$ 이온이 $Na^+La^{3+}$혼합 이온 으로 0-50mol.%치환된 $Pb_{1-x}(Na_12/La_12)_x(Mg_13/Nb_23/)O_3$ 화합물의 구조변화와 유전 성질을 X-선 회절법, 작외선과 라만 분광법, LCR meter등으로 연구하였다. $Na^+La^{3+}$혼합 이온의 치환량과 소결 온도가 증가함에 따라 perovskite 상의 양이 증가하였다. 치환량이 증가할 때 1:1 질서화에 의한 초격자선을 X-선 회절법으로 발견할수 없었지만, 라만 분광법과 이완성 매개변수의 증가로부터 A자리 양이온의 크기감소가 질서화에 영향을 미침을 알 수 있었다. Pb_{1-x}(Na_12/La_12)_x(Mg_13/Nb_23/)O_3$의 유전 성질은 perovskite 상의 양과 낟알 크기 및 밀도에 의해 영향을 받았고, 치환량이 증가할 때 상전이는 확산되었으며 상전이 온도는 감소하였다.

• 한국수소및신에너지학회논문집
• /
• 제32권1호
• /
• pp.41-52
• /
• 2021

NiO and Co3O4-doped porous La(CoNi)O3 perovskite oxides were prepared from excess Ni addition by a hydrothermal method using porous silica template, and characterized as bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) for Zn-air rechargeable batteries in alkaline solution. Excess Ni induced to form NiO and Co3O4 in La(CoNi)O3 particles. The NiO and Co3O4-doped porous La(CoNi)O3 showed high specific surface area, up to nine times of conventionally synthesized perovskite oxide, and abundant pore volume with similar structure. Extra added Ni was partially substituted for Co as B site of ABO3 perovskite structure and formed to NiO and Co3O4 which was highly dispersed in particles. Excess Ni in La(CoNi)O3 catalysts increased OER performance (259 mA/㎠ at 2.4 V) in alkaline solution, although the activities (211 mA/㎠ at 0.5 V) for ORR were not changed with the content of excess Ni. La(CoNi)O3 with excess Ni showed very stable cyclability and low capacity fading rate (0.38 & 0.07 ㎶/hour for ORR & OER) until 300 hours (~70 cycles) but more excess content of Ni in La(CoNi)O3 gave negative effect to cyclability.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.15-22
• /
• 2023

BNKT Ceramics, one of the representative Pb free based piezoelectric ceramics, constitutes a perovskite(ABO3) structure. At this time, the perovskite structure (ABO3) is in the form where the corners of the octahedrons are connected, and in the unit cell, two ions, A and B, are cations, A ion is located at the body center, B ion is located at each corner, and an anion O is located at the center of each side. Since Bi, Na, and K sources constituting the A site are highly volatile at a sintering temperature of 1100℃ or higher, it is difficult to maintain uniformity of the composition. In order to solve this problem, there should be suppression of volatilization of the A site material or additional compensation of the volatilized. In this study, the basic composition of BNKT Ceramics was set to Bi_0.5(Na_0.78K_0.22)_0.5TiO₃ (= BNKT), and volatile site (Bi, Na, and K sources) were coated in the form of a shell to compensate additionally for the A site ions. In addition, the physical and electrical properties of BNKT and its coated with shell additives(= @BNK) were compared and analyzed, respectively. As a result of analyzing the crystal structure through XRD, both BNKT(Core) and @BNK(Shell) had perovskite phases, and the crystallinity was almost similar. Although the Curie temperature of the two sintered bodies was almost the same (TC = 290 ~ 300 ℃), it was confirmed that the d33 (piezoelectric coefficient) and Pr (residual polarization) values were different. The experimental results indicated that the additional compensation for a shell additive causes the coarsening, resulting in a decrease in sintering density and Pr(remanent polarization). However, coating shell additives to compensate for A site ion is an effective way to suppress volatilization. Based on these experimental results, it would be the biggest advantage to develop an eco-friendly material (Lead-free) that replaced lead (Pb), which is harmful to the human body. This lead-free piezoelectric material can be applied to a biomedical device or products(ex. earphones (hearing aids), heart rate monitors, ultrasonic vibrators, etc.) and skin beauty improvement products (mask packs for whitening and wrinkle improvement).