• 소성∙가공
• /
• 제16권7호
• /
• pp.521-529
• /
• 2007

This paper is concerned with the analysis on the surface expansion of AA 2024 and AA 1100 aluminum alloys in backward extrusion process. Due to heavy surface expansion appeared usually in the backward can extrusion process, the tribological conditions along the interface between the material and the punch land are very severe. In the present study, the surface expansion is analyzed especially under various process conditions. The main goal of this study is to investigate the influence of degree of reduction in height, geometries of punch nose, friction and hardening characteristics of different aluminum alloys on the material flow and thus on the surface expansion on the working material. Two different materials are selected for investigation as model materials and they are AA 2024 and AA 1100 aluminum alloys. The geometrical parameters employed in analysis include punch corner radius and punch nose angle. The geometry of punch follows basically the recommendation of ICFG and some variations of punch geometry are adopted to obtain quantitative information on the effect of geometrical parameters on material flow. Extensive simulation has been conducted by applying the rigid-plastic finite element method to the backward can extrusion process under different geometrical, material, and interface conditions. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including pressure distributions along the interface between workpiece and punch, comparison of surface expansion between two model materials, geometrical and interfacial parametric effects on surface expansion, and load-stroke relationships.

• Steel and Composite Structures
• /
• 제51권2호
• /
• pp.153-172
• /
• 2024

Due to the fast development of constructions in recent years, there has been a rapid consumption of fresh water and river sand. In the production of concrete, alternatives such as sea water and sea sand are available. The near surface mounted (NSM) technique is one of the most important methods of strengthening. Aluminum alloy (AA) bars are non-rusting and suitable for usage with sea water and sand concrete (SSC). The goal of this study was to enhance the shear behaviour of SSC-beams strengthened with NSM AA bars. Twenty-four RC beams were cast from fresh water river sand concrete (FRC) and SSC before being tested in four-point flexure. All beams are the same size and have the same internal reinforcement. The major factors are the concrete type (FRC or SSC), the concrete degree (C25 or C50 with compressive strength = 25 and 50 MPa, respectively), the presence of AA bars for strengthening, the direction of AA bar reinforcement (vertical or diagonal), and the AA bar ratio (0, 0.5, 1, 1.25 and 2 %). The beams' failure mechanism, load-displacement response, ultimate capacity, and ductility were investigated. Maximum load and ductility of C25-FRC-specimens with vertical and diagonal AA bar ratios (1%) were 100,174 % and 140, 205.5 % greater, respectively, than a matching control specimen. The ultimate load and ductility of all SSC-beams were 16-28 % and 11.3-87 % greater, respectively, for different AA bar methods than that of FRC-beams. The ultimate load and ductility of C25-SSC-beams vertically strengthened with AA bar ratios were 66.7-172.7 % and 89.6-267.9 % higher than the unstrengthened beam, respectively. When compared to unstrengthened beams, the ultimate load and ductility of C50-SSC-beams vertically reinforced with AA bar ratios rose by 50-120 % and 45.4-336.1 %, respectively. National code proposed formulae were utilized to determine the theoretical load of tested beams and compared to matching experimental results. The predicted theoretical loads were found to be close to the experimental values.

• 열처리공학회지
• /
• 제37권3호
• /
• pp.114-120
• /
• 2024

AA 2026, which is used as an aviation material, is an improved version of 2024 and has higher physical properties, and is a material that has the potential to be applied to supersonic aircraft to be developed in the future. However, when an aircraft exceeds supersonic speeds, the surface heats up and the material must be resistant to this. Therefore, this study confirmed the high-temperature properties of AA 2026, an aviation structural material. AA 2026, solution treated at 500℃ for 4hr, was naturally aged at room temperature for more than 168 hr. Changes in microstructure and physical properties were confirmed over several hours of exposure to 100℃, 200℃, and 300℃, respectively. As a result of microstructure analysis, there was no significant change at 100℃, and from 200℃, GPB, a strengthening mechanism, grew and formed an S Phase. It was confirmed that the S Phase grew as the exposure time increased. Through a tensile test, it was confirmed that physical properties deteriorated as the precipitates grew. However, it was confirmed that the properties were stably maintained at 100℃, which is the temperature when the speed of a supersonic aircraft is less than Mach 2.

• Advances in materials Research
• /
• 제1권2호
• /
• pp.147-160
• /
• 2012

In the present study, diffusion bonding was carried out between AZ31B magnesium and AA2024 aluminium in the temperature range of $405^{\circ}C$ to $475^{\circ}C$ for 15 min to 85 min and 5MPa to 20 MPa uniaxial loads was applied. Interface quality of the joints was assessed by microhardness and shear testing. Also, the bonding interfaces were analyzed by means of optical microscopy, scanning electron microscopy, energy dispersive spectrometer and XRD. The maximum bonding and shear strength was obtained at $440^{\circ}C$, 12 MPa and 70 min. The maximum hardness values were obtained from the area next to the interface in magnesium side of the joint. The hardness values were found to decrease with increasing distance from the interface in magnesium side while it remained constant in aluminium side. It was seen that the diffusion transition zone near the interface consists of various phases of $MgAl_2O_4$, $Mg_2SiO_4$ and $Al_2SiO_5$.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.549-550
• /
• 2006

The corrosion performance of a powder metallurgical aluminum alloy in aeronautical environments was studied for both as sintered and heat treated states. Sintered samples were obtained by uniaxial pressing of an Al-Cu-Mg prealloyed powder followed by liquid phase sintering. The heat treatments applied were T4 and T6. Corrosion behaviour was assessed by means of potentiodynamic polarization. Results for the equivalent commercial wrought counterpart, AA2024-T3, are also presented for comparison. Similar corrosion performance was observed for both as sintered and AA2024-T3 samples, while corrosion resistance of the PM materials was improved by the heat treatment, especially in the T4 state.

• Animal Bioscience
• /
• 제37권3호
• /
• pp.492-499
• /
• 2024

Objective: The objective was to determine the influence of amino acid (AA) supplementation during the adaptation period on the ileal digestibility of crude protein and AA in corn and soybean meal (SBM) fed to pigs. Methods: Six barrows with an initial body weight of 30.9±2.6 kg fitted with a T-cannula at the distal ileum were assigned to a 6×6 Latin square design with 6 dietary treatments and 6 periods. Two experimental diets contained corn or SBM as the sole AA source and an N-free diet was additionally prepared. For AA supplementation groups, an AA mixture consisted of Gly, Lys, Met, Thr, Trp, Ile, Val, His, and Phe was added to the corn diet and the N-free diet at the expense of cornstarch, and an AA mixture of Lys, Met, and Thr was added to the SBM diet. All diets contained 0.5% of chromic oxide. The 6 experimental diets were fed to the pigs for four and half days, and the 3 diets containing an AA mixture were switched to the respective diets without AA mixture during the following two and half days. Ileal digesta were collected on days 6 and 7. Results: The addition of an AA mixture during the adaptation period increased apparent ileal digestibility of Arg and Trp in corn (p<0.05) but did not affect that in SBM. The addition of an AA mixture during the adaptation period increased apparent ileal digestibility of Pro and Gly regardless of feed ingredient (p<0.05) but did not affect that of other AA. All AA except Pro in corn and SBM were unaffected by the addition of the AA mixture during the adaptation period. Conclusion: The addition of amino acids to a low-protein diet during the adaptation period does not affect the standardized ileal digestibility of indispensable amino acids in pigs.

• 대한한의학방제학회지
• /
• 제32권1호
• /
• pp.51-61
• /
• 2024

Objectives : This study induced oxidative stress in HepG2 cells by treating them with AA+iron and investigated the effects of forsythia suspensa extract on this stress, as well as elucidated the molecular mechanisms underlying its hepatoprotective effects. Methods : To confirm the antioxidative effects of FSE, HepG2 cells were induced with AA+iron to induce oxidative stress, followed by MTT assay. Additionally, the effect of FSE in reducing the increased ROS levels and mitochondrial damage induced by AA+iron in HepG2 cells was confirmed using FACS. Furthermore, western blot analysis were conducted to investigate the molecular mechanisms underlying the hepatoprotective effects of FSE. Results : FSE increased the decreased cell viability induced by AA+iron. Additionally, FSE normalized the expression of apoptosis-related proteins induced by AA+iron. The elevated ROS levels in HepG2 cells induced by AA+iron were reduced by FSE, and the increase in Rh123-negative cells induced by AA+iron was attenuated by FSE. Moreover, FSE activated the protein expression of AMPK and its related phosphorylating enzymes, LKB1 and ACC. Furthermore, FSE activated YAP and its upstream phosphorylating enzyme, LATS1. Conclusions : These results demonstrate that FSE has an inhibitory effect on oxidative stress induced by AA+iron and may have potential hepatoprotective effects.

• 대한한의학방제학회지
• /
• 제32권1호
• /
• pp.99-109
• /
• 2024

Objectives : In this study, we investigated the cytoprotective effect of Eriobotrya japonica L. (EJ) extract against Arachidonic acid (AA)+iron-induced oxidative stress. Methods : To confirm the cytoprotective effect of EJ against AA+iron-induced oxidative stress in HepG2 cells, it was evaluated by MTT assay, immunoblot anaylsis, and Calcein-AM/propidium iodide (PI) staining. Additionally, the mechanism of action of the cytoprotective effect was evaluated through molecular mechanisms. Results : EJ (100 ㎍/mL) inhibited Arachidonic acid (AA)+iron-induced cell death in a concentration-dependent manner. It also inhibited AA+iron-induced mitochondrial dysfunction and ROS production. EJ activated the LKB1-AMPK signaling pathway. Conclusions : In conclusion, EJ has the ability to protect liver cells from oxidative stress, indicating that it is related to AMPK-LKB1 signaling pathways.

• 한국식품저장유통학회지
• /
• 제31권2호
• /
• pp.315-323
• /
• 2024

현재 항염증 활성에 대한 효능이 검증된 acemannan과 aloesin을 다양한 비율로 혼합하여 비율에 따른 항염증 효능을 확인하고자 본 연구를 진행하였다. 항염증 활성은 NO, PGE₂, TNF-α 및 IL-6 생성량 및 염증 관련 단백질인 iNOS, COX-2의 발현량에 대한 효능을 검증하였다. Acemannan과 aloesin 각각의 NO 생성 저해 활성 결과와 혼합 시료인 AA-1, AA-2, AA-3, AA-4, AA-5의 NO 생성 저해 활성 결과를 비교하였을 때, 혼합 시료가 더 우수한 NO 생성 저해 활성을 나타내는 것을 확인하였다. 이후 최적의 배합 비율을 찾기 위해 PGE₂, TNF-α 및 IL-6 생성량에 대해 측정하였다. 그 결과, 시료 5종 모두 최종농도인 100 ㎍/mL 농도에서 LPS 단독 처리군 대비 저해 효과가 나타났으며, 이 중 AA-2의 저해 효과가 가장 높은 것을 확인하여 western blot을 통한 염증 관련 단백질 발현량은 AA-2를 이용하여 실험을 진행하였다. 염증 관련 단백질인 iNOS 및 COX-2의 발현량을 측정 결과, AA-2는 농도 의존적으로 감소하였으며, 최종 농도인 100 ㎍/mL 농도에서 LPS 단독 처리군 대비 각각 25% 이상의 억제 효과가 나타나는 것을 확인하였다. 이러한 결과들을 토대로 acemannan과 aloesin을 다양한 비율로 배합하였을 때, 항염증 활성을 가진 것을 확인하였으며, 이 중 acemannan과 aloesin이 1:2의 비율로 혼합되었을 때 가장 높은 항염증 활성을 나타내었다. 결론적으로 acemannan과 aloesin을 혼합한 시료는 다양한 기능성 소재로써 활용이 가능하며, 이후 항염증 활성 실험들의 기초자료로도 활용이 가능한 것을 확인하였다.

• 소성∙가공
• /
• 제16권8호
• /
• pp.582-589
• /
• 2007

This paper is related to an analysis on the surface expansion in backward can extrusion process using spherical punches. It is generally known that the backward can extrusion process usually experiences severe normal pressure and heavy surface expansion. This is a reason why the backward can extrusion process is one of most difficult operations among many forging processes. Different punch nose radii have been applied to the simulation to investigate the effect of punch nose radius on the surface expansion, which is a major effort in this study. AA 2024 aluminum alloy is selected as a model material for investigation. Different frictional conditions have also been selected as a process parameter. The pressure applied on the punch has been also investigated since heavy surface expansion as well as high normal pressure on the tool usually leads to severe tribological conditions along the interface between material and tool. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including strain distributions and maximum pressure exerted on the workpiece and punch, the effect of punch nose radius and the frictional condition on the surface expansion and the location and magnitude of maximum pressure exerted, respectively.