• Journal of Ginseng Research
• /
• v.41 no.3
• /
• pp.339-346
• /
• 2017

Background: In this study, we investigated how to convert the Panax ginseng DNA sequence code and chemical fingerprints into a two-dimensional code. In order to improve the compression efficiency, GATC2Bytes and digital merger compression algorithms are proposed. Methods: HPLC chemical fingerprint data of 10 groups of P. ginseng from Northeast China and the internal transcribed spacer 2 (ITS2) sequence code as the DNA sequence code were ready for conversion. In order to convert such data into a two-dimensional code, the following six steps were performed: First, the chemical fingerprint characteristic data sets were obtained through the inflection filtering algorithm. Second, precompression processing of such data sets is undertaken. Third, precompression processing was undertaken with the P. ginseng DNA (ITS2) sequence codes. Fourth, the precompressed chemical fingerprint data and the DNA (ITS2) sequence code were combined in accordance with the set data format. Such combined data can be compressed by Zlib, an open source data compression algorithm. Finally, the compressed data generated a two-dimensional code called a quick response code (QR code). Results: Through the abovementioned converting process, it can be found that the number of bytes needed for storing P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can be greatly reduced. After GTCA2Bytes algorithm processing, the ITS2 compression rate reaches 75% and the chemical fingerprint compression rate exceeds 99.65% via filtration and digital merger compression algorithm processing. Therefore, the overall compression ratio even exceeds 99.36%. The capacity of the formed QR code is around 0.5k, which can easily and successfully be read and identified by any smartphone. Conclusion: P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can form a QR code after data processing, and therefore the QR code can be a perfect carrier of the authenticity and quality of P. ginseng information. This study provides a theoretical basis for the development of a quality traceability system of traditional Chinese medicine based on a two-dimensional code.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.127-135
• /
• 2002

The accurate evaluation of settlement is important to every steps in the constructions involving soft soils. Relating with those constructions, especially, it has been emphasized recently that the influnce of secondary settlement is important. The ratio of $C_a/C_c$ and the surcharging tests can be applied collaboratively to predicting and reducing secondary consolidation. A series of incremental loading consolidation test and surcharging tests for undisturbed samples of Kunsan clay were performed in this study. As a result of the tests, the ratio of $C_a/C_c$ for the clay was found to be 0.0329. Also, the relationship between void ratio and $t/t_p$ was shown to be linear. Accordingly, the secondary compression index, $C_a for a long term loading had a constant value regardless of time. When the total surcharge ratio was 0.4 and the dissipation ratio of excessive porewater pressure was in the range from 80% to 100%, secondary settlement was effectively reduced for Kunsan clay.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.11
• /
• pp.866-875
• /
• 1991

In this paper, multi pulse excited-linear predictive coding (MPE-LPC), where the correlation eliminated residual signal is modeled by a few pules, is shown to be effective for the compression of electrocardiogram (ECG) data, and a more efficient scheme for a faithful reconstruction of ECG is proposed. The reconstruction charateristic of QRS's and P.T waves is improved using the adaptive pulse allocation (APA), and the compression ratio (CR) can be changed by controlling the mumber of modeling pulses. The performance of the proposed method was evaluated using 10 normal and 10 abnormal ECG data. The proposed method had a better performance than the variable threshold amplitude zone time epoch coding (AZTEC) algorithm and the scan-along polygonal approximation (SAPA) algorithm with the same CR. With the CR in kthe range of 8:1 to 14:1, we could compress ECG data efficiently.

• Steel and Composite Structures
• /
• v.18 no.5
• /
• pp.1177-1195
• /
• 2015

Six specimens are tested to investigate the cyclic behavior of beam-to-column abnormal joints in steel moment-resisting frames, which are designed according to the principle of strong-member and weak-panel zone. Key parameters include the axial compression ratio of column and the section depth ratio of beams. Experimental results indicate that four types of failure patterns occurred during the loading process. The $P-{\Delta}$ hysteretic loops are stable and plentiful, but have different changing tendency at the positive and negative direction in the later of loading process due to mechanical behaviors of specimens. The ultimate strength tends to increase with the decrease of the section depth ratio of beams, but it is not apparent relationship to the axial compression ratio of column, which is less than 0.5. The top panel zone has good deformation capacity and the shear rotation can reach to 0.04 rad. The top panel zone and the bottom panel zone don't work as a whole. Based on the experimental results, the equation for shear strength of the abnormal joint panel zone is established by considering the restriction of the bottom panel zone to the top panel zone, which is suitable for the abnormal joint of H-shaped or box column and beams with different depths.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.139-144
• /
• 1994

The effect of some formulation variables on the release rate of famotidine, a $H_2$ receptor antagonist, from cellulose matrices containing hydroxypropylcellulose (HPC) in different ratios and types was investigated. The effects of tablet shape and compression pressure on dissolution rate of famotidine were studied. And the effect of the pH of dissolution media was also studied. Increase in the ratio of polymer to drug decreased the release rate of famotidine. Increase of the polymer viscosity also decreased the release rate. The release rate of famotidine was dependent on the pH of dissolution media. The release rate of drug was not much dependent on the compression pressure but dependent on the tablet shape and/or surface area. Consequently, the release rate of famotidine can be modified by changing the HPC contents, types of polymers with different viscosity grades or using appropriate fillers.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.43-53
• /
• 2008

Purpose : This study was designed to examine physiological changes in the body of rescuers conduct CPR according to the 2005 new guideline from American Heart Association. The ratio of artificial respiration has changed from 15 : 2 into 30 : 2 in 2005. The researcher tried to know the correlation between the physiological changes and the accuracy of CPR. Method : The examinees of this study were 26 students (Dept. of Emergency Medical Service). After the training, participants conducted 10 minute CPR and soon after the CPR, their vital signs were checked, and lactic acid and concentration of ammonia were analysed from their blood samples. Questionnaires to ask their subjective fatigue level were filled out after blood samples and 10 minute - CPR was performed. Results : 1) After the CPR, concentrations of ammonia were $149.71{\mu}{\ell}/d{\ell}$ and $162.17{\mu}{\ell}/d{\ell}$ in 15 : 2 and 30 : 2, respectively. The number was higher in 30 : 2 but it wan not statistically meaningful (p = .493). Log value of lactic acid was a little higher in 30 : 2 with 42 log($mmol/{\ell}$) and 54 log($mmol/{\ell}$) in 15 : 2 and 30 : 2, respectively but it was not statistically meaningful (p = .113). 2) Blood pressure in 15 : 2 and 30 : 2 were 118.50 mmHg and 125.08 mmHg while pulse in two different cases were 96.14 and 97.25, showing no statistically significant differences (blood pressure : p = .155, pulse : p = .841). 3) Subjective fatigue was a bit high in 30 : 2 with 5.93 and 6.92 points in 15 : 2 and 30 : 2 respectively but it was not statistically meaningful (p = .142). 4) In the 10 minute CPR, respiration accuracy was 96.21% in 15 : 2 and 94.79% in 30 : 2. There was no statistical significances between the two(p = .225). In the meanwhile, chest compression accuracy was 92.57% in 15 : 2 and 91.83% in 30 : 2. From the beginning to the end of chest compression, there showed no difference(p = .425). the type of CPR did not influence upon the accuracy of chest compression(p = .756). Conclusion : In the CPR conducted by skilled rescuers for 10 minutes, there were no statistically meaningful differences between 15 : 2 and 30 : 2 in the concentration of fatigue element in a blood, subjective fatigue, vital signs and accuracy of CPR. Therefore, 30 : 2 CPR recommended by American Heart Association need to be recommended and performed in scene size up.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.1
• /
• pp.61-68
• /
• 2006

The p-version nonlinear finite element model has been developed to analyze the nonlinear behavior of simply supported RC slabs strengthened with carbon fiber reinforced plastic sheets. The shape function is adopted with integral of Legendre polynomials. The compression model of concrete is based on the Kupfer's yield criterion, hardening rule, and crushing condition. The cracking behavior is modeled by a smeared crack model. In this study, the fixed crack approach is adopted as being geometrically fixed in direction once generated. Each steel layer has a uniaxial behavior resisting only the axial force in the bar direction. Identical behavior is assumed fur tension and compression of steel according to the elastic modulus. The carbon fiber reinforced plastic sheets are considered as reinforced layers of equivalent thickness with uniaxial strength and rigidity properties in the present model. It is shown that the proposed model is able to adequately predicte the displacement and ultimate load of nonlinear simply supported RC slabs by a patch with respect to reinforcement ratio, thickness and angles of CFRP sheets.

• Geotechnical Engineering
• /
• v.10 no.4
• /
• pp.167-180
• /
• 1994

A series of long term consolidation tests were conducted under loading -unloading and loading(pc) -unloading(p.) -reloading(p,) conditions using reconstituted clay in order to investigate the effect of stress history on secondary consolidation characteristics and the applicability of the secondary consolidation model suggested by Bjerrum to overconsolidated clays. According to the test results, the secondary compression settlement affected by the stress history in the first half of experimental period and the coefficient of secondary compression, C‥‥ is dependent on overconsolidation ratio, OCR(p,1 p.), maBium OCR (p./p.), and unloading duration time. Moreover the coefficient of secondary consolidation in the latter half of experimental period Cn is mainly affected by OCR and it gradually reduces with OCR increment. Finally the comparison of the experimental results with the Bjerrum model indicates that the Bjerrum model can be applied beyond certain range of stress history in the overconsolidated clay.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.82-88
• /
• 2000

In this paper, We compare the Harr wavelet of the S+P transform with various integer coefficient filter banks and apply 9/7 ICFB to the wavelet transform. In addition, we propose a entropy-coding method that exploits the multiresolution structure and the feedback of the prediction error, and can efficiently compress the transformed image for progressive transmission. Simulation results are included to compare to the compression ratio using the S+P transform with different types of images.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.2
• /
• pp.27-36
• /
• 2021

Background : Prone hip extension (PHE) is commonly used for exercises and tests in patients with low back pain. Previous studies have shown that pelvic compression belts (PCB) and non-elastic taping (NET) contribute greatly to improvements in lumbopelvic stability. This study aimed to compare the effect of two lumbopelvic stability methods such as PCB and NET on the trunk and hip extensor muscle activities during PHE tests. Methods: Subjects who experienced low back pain (low back pain group, LBPG; n=20) and those who did not experience low back pain (non-LBPG; n=20) participated in this study. The subjects were instructed to perform PHE with and without a PCB and NET. PHE tests were performed in the condition wherein the two stabilization methods were applied, and the actions of the muscles at that time were measured using surface electromyography (EMG). EMG data were collected from the hamstring, gluteus maximus, erector spine (ES), and multifidus (MF) muscles. The data were collected three times for 5 s with a 1-min rest between each of the three sets. Results: In the LBPG, EMG of the ES muscle was significantly reduced when NET or a PCB was applied (p<.05). There was no difference in the change in the ES muscle activity when NET and a PCB were applied. The ratio of MF/ES muscleactivity showed a significant increase in the LBPG with NET (p<.05). Conclusion: Both NET and PCB applied to subjects who experienced low back pain significantly reduced the ES muscle activity during PHE exercises and helped control the balance of the superficial and deep trunk extensor muscles.