• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.272-278
• /
• 2008

Methods to separate 14 rare earth elements (REEs) and yttrium by the $AG^{(R)}$ 50W-X8 cation exchange resin, and to determine REEs by inductively coupled plasma atomic emission spectrophotometry (ICP-AES) were described. Ion exchange capacities of REEs on the resin were so high that the REEs were quantitatively ion exchanged under the flow rate of 0.3~1.0 mL/min at pH 1~6. The breakthrough capacity curve of the REEs showed that ion exchange capacities of light REEs (Cerium group) were greater than that of the heavy REEs (Yttrium group). When $200{\mu}g$ of each REEs was ion exchanged on 100 mg of resin, most of the heavy REEs were quantitatively desorbed with 10 mL of 2.0 M of $HNO_3$, while most of the light REEs with 30 mL. The method was applied to the monazite sample. The REEs could be separated from matrix, since ion exchange capacities of matrix ions of Ca, Ti, Mg, Mn were much lower than that of the REEs. However the relative standard deviations of the analytical results by the present method were not improved, as high as 1~5%.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2010

Sodium sulfate is commonly added in reactive dyebath in order to increase substantivity of the reactive dye to cellulose fiber by reducing repulsion between anionic dye and fiber. While sodium sulfate is mostly used in solid form, it is inconvenient to dissolve a large amount of powder sodium sulfate. Furthermore, if there is undissolved salt in dyebath it might cause unlevel dyeing. In this study, sodium sulfate in liquid or solid form was used in dyeing of cellulose fabric with reactive dyes of three primary color and the effect of type or amount of sodium sulfate on dyeing and fastness properties was investigated. When the amount of sodium sulfate rose to 30-50 g/l, K/S value of the dyed fabric markedly increased; further rise in sodium sulfate concentration resulted in slow increase in K/S value. For light color, optimum amount was about 30 g/l in solid form and 50-100 g/l in liquid form while, for medium to deep color, it was 50 g/l and 100-150 g/l in solid and liquid form, respectively. When using each optimum amount of salt in solid or liquid form for medium color, shape of dyeing curve as well as exhaustion was similar to each other. On the whole, similar color fastness results were obtained regardless of type or amount of sodium sulfate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1498-1504
• /
• 2005

Competitive direct ELISA was developed to detect gentamicin residues. Mice immunized with gentamicin-keyhole limpet hemocyanin (KLH) conjugate developed good antiserum titers, which gradually increased with booster injections, indicating immunization was successfully processed. Monoclonal antibody against gentamicin was prepared using hybridoma cells cloned by limit dilution of fused cells. IgG was purified from ascites fluid of hybridoma cell-injected mice through ammonium sulfate precipitation and Sephadex G-25 gel filtration. After the gel filtration, fractions of high antibody titer were further purified through affinity chromatography on protein A/G column. Monoclonal antibody against gentamicin was confirmed as IgG1, which has kappa light chain. Cross-reactivities ($CR_{50}$) of gentamicin monoclonal antibody to other aminoglycosides (kanamycin, neomycin, and streptomycin) were less than 0.005%, indicating the monoclonal antibody was highly specific for gentamicin. Standard curve constructed through competitive direct ELISA showed measurement range (from 80 to 20% of B/$B_0$ ratio) of gentamicin was between 1 and 40 ng/ml, and 50% of B/$B_0$ ratio was about 4 ng/ml. The gentamicin concentration rapidly increased to 1,300 ng/ml after the intramuscular administration up to 2 h, then sharply decreased to less than 300 ng/ml after 4 h of withdrawal, during which the elimination half-life ($t_{1/2}$) of gentamicin in the rabbit plasma was estimated to be 1.8 h. Competitive direct ELISA method developed in this study using the prepared monoclonal antibody is highly sensitive for gentamicin, and could be useful for detecting gentamicin residues in plasma of live animals.

• Journal of Plant Biology
• /
• v.12 no.2
• /
• pp.28-42
• /
• 1969

Field studies were conducted with the split plot design of 20 treatment with a combination of 4 levels of 3, 5, 7 and 9 plants per hill and 5 levels of 60, 80, 100, 120 and 140 hills per 3.3$m^2$ on non-, low- and high-salty areas. Rice variety, Kusabue was grown under jthe standard fertilization and cultivating. Investigation was made on the productive structure of plant population, leaf-area index, light intensity curve by stratum of crop population at the panicle differentiation stage. The competition density effect on the photosynthetic capacity was low as the salt concentration became higher. This seemed to suggest the possiblity of an increased yielding capacity by closer planting in the salty areas. The effect of an increased number of hills per unit area was greater than that of an increased unmber of plants per hill due to the total leaf area and space distribution of the actie assimilation parts of rice plants. The number of ppanicle per unit area in the salty areas were increased when the number of hill per 3.3$m^2$ increased over an increased number of plants per hill, and the panicle weight was reduced by close planting in the non-lalty area, while it was not reduced so much in the salty areas. The number of grains per panicle was significantly decreased by close planting in the salty areas as in the non-salty area, and ratio of matured grain was not decreased even by close planting in the salty areas, while it was significantly decreased by close planting in the non-salty area. An increase in the rice yield was possible by close planting and greatly related to leaf area index in the salty areas but not in the non-salty area. Increasing the number of hills per unit area showed greater effect on the increase of the rice yield than an increased number of plants per hill in the salty areas. Relationships between the growth characteristics and the rice population affected by plant spacing mode for maximum production were discussed.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.3
• /
• pp.128-132
• /
• 2004

Ozone effects were studied by plant growth chamber to evaluate the impact of ozone ($O_3$) on the physiology of two hot pepper, Capsicum annuum L., cultivars, 'Dabotab' and 'Buchon'. Forty-day old plants with $5{\sim}7$ leaves were exposed to $O_3$ of <20 and 150 nL/L for 8h/d for 3 days. Net photosynthesis and stomatal conductance were measured and foliar injury was described. Foliar damage due to the treated $O_3$ was different from the varieties. 'Dabotab' was most sensitive to $O_3$ and 'Buchon' was resistant. Symptom of ozone damage on the leaves was bifacial necrosis. Decreases of net photosynthesis by $O_3$ were 56% and 40% on 'Dabotab' and 'Buchon', respectively. Decreases of stomatal conductance by $O_3$ were 66% and 63% on each variety. $O_3$ damage on net photosynthesis was started at the low levels of light on the two hot peppers. In addition, assimilation-internal $CO_2$ concentration curves were not different from the two varieties. In conclusion, $O_3$ closed the stomata and decrease net photosynthesis on hot peppers regardless of the ozone sensitivity on leaf injury, but the difference of ecophysiological responses between the two varieties was not found clearly.

• Journal of Radiation Protection and Research
• /
• v.36 no.2
• /
• pp.52-58
• /
• 2011

OSL dating for three hearths having the sequence of use and discard in No. 29 and 29-1 dwelling sites at Sogol cultural site was carried out. Resulting from the deconvolution of natural CW-OSL decay curve and thermal zeroing test, it was turned out that OSL signal was entirely composed of the heat- and light-sensitive fast component with high photoionization cross-section and all quartz OSL signals were thermally bleached under $300^{\circ}C$ which is the minimum temperature related to heating and cooking in Bronze age. After dose recovery test and plateau test, paleodose of each hearth sample was evaluated by using SAR method, and OSL age was determined from the ratio of paleodose to annual dose rate. For the purpose of the precision improvement of OSL age, Bayesian statistics was applied to each hearth's age and the archaeological sequence information. Finally, it could be concluded to the accurate use period of each hearth from the resultant OSL ages.

• Korean Journal of Animal Reproduction
• /
• v.17 no.1
• /
• pp.49-56
• /
• 1993

Mouse mammary epithelial cells(NMuMG) were plated onto 24 well phates(100,000 cells/well), in DMEM supplemented with 10% fetal calf serum. After serum starvation for 24 hours, EGF)0~100ng/ml) was added simultaneously with IGF-I(10ng/ml), 1$\mu$M photoreactive cAMP(4,5-dimethoxy-2-nitrobenzyl adenosine-3',5' cyclic monophosphate, DMNB) or IGF-I plus DMNB. After 2 hours, the cells were expposed to UV light(300nm, 3 second pulse0 in order to activate DMNB which induces a rapid transient increase in intracellular cAMP upon UV irradiation. DNA synthesis was estimated as incorporation of 3H-thymidine into DNA(1 hour pulse with 1$\mu$Ci/ml, 18~19 hours after UV exposure). Without IGF-I or DMNB, EGF(10 or 100ng/ml) increased DNA synthesis from 8,362 dpm/well in control to 16,345 or 18,684 dpm/well with EGF(pooled SE=1,239 dpm/well, P<0.05). IGF-I or IGF-I plus DMNB alone increased DNA synthesis from 8,362 dpm/well in control to 17,307 or 20,427 dpm/well, respectively(P<0.05). Addition of IGF-I, DMNB or IGF-I plus DMNB into 0~100ng/ml EGF did not significantly change the shape of dose response curve of EGF alone. In other experiment, EGF or IGF-I plus DMNB into 10ng/ml EGF group exhibited interaction effect in DNAsynthesis [EGF(10ng/ml)=18,497; IGF-I＋EGF=22,837; DMNB＋EGF=20,658 ; IGF-I＋DMNB＋EGF=29,658, pooled SE=1,055, P<0.05]. These results indicate that simultaneous activation of EGF, IGF-I and intracellular cAMP interact in DNA synthesis of mouse mammary epithelial cells.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.148-149
• /
• 2012

This paper reports doping of carbon atoms in GaN layer, which based on dimethylhydrazine (DMHy) and growth temperature. It is well known that dislocations can act as non-radiative recombination center in light emitting diode (LED). Recently, many researchers have tried to reduce the dislocation density by using various techniques such as lateral epitaxial overgrowth (LEO) [1] and patterned sapphire substrate (PSS) [2], and etc. However, LEO and PSS techniques require additional complicated steps to make masks or patterns on the substrate. Some reports also showed insertion of carbon doped layer may have good effect on crystal quality of GaN layer [3]. Here we report the growth of GaN epitaxial layer by inserting carbon doped GaN layer into GaN epitaxial layer. GaN:C layer growth was performed in metal-organic chemical vapor deposition (MOCVD) reactor, and DMHy was used as a carbon doping source. We elucidated the role of DMHy in various GaN:C growth temperature. When growth temperature of GaN decreases, the concentration of carbon increases. Hence, we also checked the carbon concentration with DMHy depending on growth temperature. Carbon concentration of conventional GaN is $1.15{\times}1016$. Carbon concentration can be achieved up to $4.68{\times}1,018$. GaN epilayer quality measured by XRD rocking curve get better with GaN:C layer insertion. FWHM of (002) was decreased from 245 arcsec to 234 arcsec and FWHM of (102) decreased from 338 arcsec to 302 arcsec. By comparing the quality of GaN:C layer inserted GaN with conventional GaN, we confirmed that GaN:C interlayer can block dislocations.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.23-30
• /
• 1999

have been many studies to analyze the behavior of metal plate connector that most widely used to connect light frame wood trusses. Finite element method{FEM) was one of the methods for those studies. FEM using linear model may well be applicable to predict the initial slope of load-displacement curve for metal plate connection. However, displacement may be overestimated above experimental results with the increase of load. Therefore, linear model cannot be used for the nonlinear behavior part. To predict real behavior more exactly, nonlinear term was included to FEM model in this study. It was found out that EA and AA mode showed the high agreement between predicted results and experimental ones. However, EE and AE mode showed a little difference between predicted results and experimental ones in nonlinear part. This results might be caused by insufficient reflection of the slip effect. Consequently, the effect of slip shall be considered to approve the accuracy of nonlinear analysis for the behavior of metal plate connection.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.1-8
• /
• 1984

The tools and techniques for measuring the spectral distribution of light emitted by, transmitted by, or reflected from food surfaces are described for determining the extent to which original natural color is preserved in processing and subsequent storage of foods. Color differences may be evaluated indirectly in terms of some physical characteristic of the sample or extracted fraction thereof that is largely responsible for the color characteristics. For evaluation more directly in terms of what the observer actually seen, color differences are measured by reflectance spectrophotometry and photoelectric colorimetry and expressed as differences in psychophysical indexes such as luminous reflectance and chromaticity. The standard system, against which other systems could be compared, is the one recommended by the International Committee on illumination and which is based on the 'standard observer', which is a simulated standard eye, consisting of three primary color filters Z, with X being essentially amber in color, Y, green and Z, blue. Any spectrophotometric curve of reflectance obtained from the surface of an object can be integrated in terms of X, Y and Z. Psychophysical notation may be converted by standard methods to the colorimetrically more descriptive terms of Munsell hue, value and chroma.