• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.55-66
• /
• 2015

The objective of this study is to propose a method by which movement fitness can be evaluated using a three-dimensional virtual garment simulation program. To this end, five types of jean pants for men were evaluated on the program by setting the avatars to make particular movements to examine the level of pressure on each body part. To verify whether the clothing pressure measurement produces valid and reliable results, virtual garment simulation program was utilized. The results indicated that there were significant differences in the levels of pressure on body parts depending on the type of test garment and motion. In addition, the clothing pressure measurement results were in line with the appearance evaluation results suggested by a previous study. Based on this set of results, the nomological validity of the clothing pressure measurement program used in this study was verified. Moreover, we employed an appearance evaluation along with the clothing pressure measurement to verify the reliability of the program; there was a high correlation between clothing pressure measurements and appearance evaluation measurements, indicating that measuring clothing pressures may well compensate for the limitations of appearance evaluation. We expect the results of this study to make valuable contributions in facilitating the digitalization of the fashion industry. Furthermore, this study also is significant in that it has suggested 3D virtual fitting programs as a solution to the long-criticized problem related to the evaluation of movement fitness in existing virtual garment simulation programs.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.133-143
• /
• 1993

The aim of this study was to establish reproducible method for measurements of radiopacity and to investigate the level of radiopacity of root canal sealers. The experiments were performed in two parts. In the first part, densitometric readings were performed using an aluminum step wedge as a reference at variable voltages and exposure times. Then standard curves for the aluminum step wedge were compared to comprehend the effect of voltage and exposure time. In the second part, on the basis of these results, appropriate conditions for exposure were adopted for standardized measurements of radiopacity. Under standardized set of conditions, densitometric measurements of ten root canal sealers and one gutta-percha point were performed and the levels of radiopacity referable to an equivalent thickness of aluminum were compared. The following results were obtained : 1. At 50 and 60 kVp, increasing the exposure time caused a decrease in the slope of the standard curve for the aluminum step wedge. However, at 70 kVp increasing the exposure time causing a parallel shift of the standard curve to the right. 2. At constant exposure time, increasing the voltage caused a decrease in the slope of the standard curve. 3. The radiopacity of root canal sealers and a gutta-percha point varied between 2.43 mm Al and 9.20 mm Al equivalent. 4. All the root canal sealers had radiopacities more than dentin, and the radiopacity of the gutta-percha point was approximately 5 times as much as that of dentin in terms of equivalent thickness of aluminum. 5. The AH26 had radiopacity more than the gutta-percha point, and the radiopacities of ZOE, Vitapex, Canals, Kerr PCS, Nogenol were similar to that of the gutta-percha point, and Tubliseal, Apatite II, Apatite III, Silapex were less radiopaque than the gutta-percha point.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.48-53
• /
• 2017

Objectives: The aim of this study was to investigate the ability of the fluorescence-aided caries excavation (FACE) device to detect residual caries by comparing conventional methods in vivo. Materials and Methods: A total of 301 females and 202 males with carious teeth participated in this study. The cavity preparations were done by grade 4 (Group 1, 154 teeth), grade 5 (Group 2, 176 teeth), and postgraduate (Group 3, 173 teeth) students. After caries excavation using a handpiece and hand instruments, the presence of residual caries was evaluated by 2 investigators who were previously calibrated for visual-tactile assessment with and without magnifying glasses and trained in the use of a FACE device. The tooth number, cavity type, and presence or absence of residual caries were recorded. The data were analyzed using the Chi-square test, the Fisher's Exact test, or the McNemar test as appropriate. Kappa statistics was used for calibration. In all tests, the level of significance was set at p = 0.05. Results: Almost half of the cavities prepared were Class II (Class I, 20.9%; Class II, 48.9%; Class III, 20.1%; Class IV, 3.4%; Class V, 6.8%). Higher numbers of cavities left with caries were observed in Groups 1 and 2 than in Group 3 for all examination methods. Significant differences were found between visual inspection with or without magnifying glasses and inspection with a FACE device for all groups (p < 0.001). More residual caries were detected through inspection with a FACE device (46.5%) than through either visual inspection (31.8%) or inspection with a magnifying glass (37.6%). Conclusions: Within the limitations of this study, the FACE device may be an effective method for the detection of residual caries.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.2
• /
• pp.79-88
• /
• 2019

Objective: The aim of this study was to determine the peak torques of the knee and ankle joint and local stability of the lower extremity's joints, and muscle activation patterns of the lower extremity's muscles between fallers and non-fallers in the elderly women during walking. Method: Four elderly women (age: $74.5{\pm}5.2yrs.$; height: $152.1{\pm}5.6cm$; mass: $55.3{\pm}5.4kg$; preference walking speed: $1.19{\pm}0.06m/s$) who experienced falls within six months since experiment had been conducted (falls group) and thirty-six subjects ($74.2{\pm}3.09yrs.$; height: $153.6{\pm}4.9cm$; mass: $56.7{\pm}6.4kg$; preference walking speed: $1.24{\pm}0.10m/s$) who had no experience in falls (non-falls group) within this periods participated in this study. They were measured torque peaks of the knee and ankle joint using a Human Norm and while they were walking on a treadmill at their natural pace, kinematic variables and EMG signals were collected with using a 3-D motion capture system and a wireless EMG system, respectively. Lyapunov Exponent (LyE) was determined to observe the dynamic local stability of the lower extremity's joints, and muscles activation and their co-contraction index were also analysed from EMG signals. Hypotheses between falls and non-falls group were tested using paired t-test and Mann-Whitey. Level of significance was set at p<.05. Results: Local dynamic stability in the adduction-abduction movement of the knee joint was significantly lower in falling group than non-falling group (p<.05). Conclusion: In conclusion, muscles which act on the abduction-adduction movement of the knee joint need to be strengthened to prevent from potential falls during walking. However, a small number of samples for fallers make it difficult to generalize the results of this study.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.5
• /
• pp.179-186
• /
• 2019

Information system audit, which provides effective diagnosis and inspection of IT governance, is applied to all aspects from planning to development and operation. However, there is a difficulty in carrying out the audit because the system for the specialized university IT project is not developed. Therefore, it is necessary to set the internal system as the audit-based application framework in order to apply it to university IT governance. In this paper, we propose a audit-based application framework of university information system developed for university. The framework has a difference from the existing audit system. By using this framework, it is possible to present a standard for the university IT project and easily approach and use it in the field. And it can be used for direct audit through this framework in the level of the auditor as well as the HQ admin. The framework categorizes the audit into three major dimensions and suggests a method that can be applied to the university information system audit through the UAFP(University Audit Framework Process) and quality assurance.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.10
• /
• pp.115-126
• /
• 2019

Existing buildings in urban parks are a kind of thing that has been settled and occupied on the site of an unexecuted park. The aim of this study is to identify nature by analyzing the causality and path-dependency through the transformation of the relevant system. The scope of the study was set up as a system for the occupancy of urban parks from 1934 when the building restriction system was established to 2000 when purchase claim (매수청구권) was introduced. The method of study was to get correlation by harmonizing the external and internal mechanisms affecting the relevant institution. The related system showed a modest change in the fourth stage, polymerizing the initial system. In the 1950s and 1960s, the existing buildings in urban parks were 'disguised' by government and the 'regulation' principle was applied since 1967. In the 1980s, the principle of 'protection' and 'support' for parks was added, but in the 1990s, the principle of regulation began to be lifted as the long-term unexecuted urban park (장기미집행 도시공원) problem continued for more than 60 years. Although the public concept of land ownership (토지공개념) has worked strongly for nearly 30 years since 1960, the system has developed into a form of deregulation since 1980. The nature of the relevant institution is first, dependent on the higher-level system and vertical. Second, it implies a conflict of restrictions and acceptance. Third, it is a temporary measure of the park problem. Therefore, the relevant system has long been enhancing the encroachment requirements on urban parks, so fundamental readjustment is needed in the future.

• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.440-452
• /
• 2021

The purpose of this study was to determine if an 8-week therapeutic riding (TR) program was effective in improving the walking ability of students with intellectual disabilities. Thirteen students diagnosed with intellectual disabilities participated in the TR program. TR sessions were conducted twice a week (30 min per session), with a total of 16 rides taking place over an 8-week period. A gait measurement analyzer was used to measure progress based on a turn test (6-m walking and turning test), walk test (10-m walking), and timed up and go (TUG) test. Measurements were made three times: before horse-riding (P0), after 4 weeks (8 rides) of horse-riding (P1), and after 8 weeks (16 rides) of horse-riding (P2). Data analysis was conducted using SPSS software (ver. 22.0). Descriptive statistics were generated on the general characteristics of the subjects, and the Kolmogorov-Smirnov test was used to verify the normality of the data. Because of the lack of normality, the data were analyzed using a nonparametric method and the significance level was set to 0.05. Measurements of the duration of the forward gait cycle (s) in the turn test and the forward gait speed (m/s) in the walk test indicated improved walking ability after the TR program (p < 0.001); the stride length (% height) also increased significantly (p < 0.05). The walk test revealed a significant effect of the program on the duration of the forward gait cycle (p < 0.05), while there were significant improvements on the left and right of the elaborated strides (p < 0.001). No significant improvement in TUG test performance was observed after the TR program. In this study, an 8-week TR program had positive results on gait. Therefore, further research is merited, where TR programs are likely to improve the walking ability of individuals with intellectual disabilities.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.953-960
• /
• 2020

This paper presents an optimization of gear web design used in a main gear train of an engine reduction gearbox for a rotorcraft. The optimization involves the minimization of a total weight, transmission error, misalignment, and face load distribution factor. In particular, three design variables such as a gear web thickness, location of rim-web connection, and location of shaft-web connection were set as design parameters. In the optimization process, web, rim and shaft of gears were converted from the 3D CAD geometry model to the finite element model, and then provided as input to the gear simulation program, MASTA. Lastly, NSGA-II optimization method was used to find the best combination of design parameters. As a result of the optimization, the total weight, transmission error, misalignment, face load distribution factor were all reduced, and the maximum stress was also shown to be a safe level, confirming that the overall gear performance was improved.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.2
• /
• pp.38-47
• /
• 2022

Background: The purpose of this study was to investigate the effect of the combined application of manipulation and stabilization exercises on pain and spinal curvature in patients with chronic back pain. Design: Randomized controlled trial Methods: The research subjects included 24 women in their 40s and 50s who have chronic back pain. The sample was evenly divided into an experimental group, which received the combined application of manipulation and stabilization exercises, and a control group, which received stabilization exercises only. The 30-minute intervention was applied five times a week for eight weeks. A bivariate repeated measures analysis of variances was conducted to identify the differences between the two groups before the experiment, after the fourth week, and at the end of the eight-week experiment. The level of statistical significance was set at.05. This analysis examined the within-group changes and the between-group changes using a paired t-test and an independent t-test, respectively. Results: Changes in pain differed significantly depending on the time of the measurement, the interaction between the time of the measurement and each group, and between the two groups (p<.05). Changes in the curvature of the bones of the neck, the bones of the back, and the lumbar vertebrae differed significantly depending on the time of the measurement and the interaction between the time of the measurement and each group (p<.05). Conclusion: The combined application of manipulation and stabilization exercises demonstrated a positive effect on changes in pain and spinal curvature, and the method is expected to be a useful intervention for reducing pain and improving spinal curvature in patients with back pain.

• Journal of The Korean Association of Information Education
• /
• v.26 no.5
• /
• pp.449-455
• /
• 2022

The digital culture area is a field of artificial intelligence education and partially overlaps with information ethics, and this study proposed an elementary school-centered digital culture curriculum, a detailed area of artificial intelligence education. First, as a leading overseas case in the field of digital culture, we analyzed the secure online interaction, which is the core content of the K12CS framework in the United States and the UK's computing curriculum. We presented by categorizing it into four digital areas: content, communication method, copyright, and job exploration in accordance with the domestic educational environment and field conditions. In addition, educational goals were stated according to the level of kindergarten and elementary school, and the validity of a group of field teachers majoring in in information and artificial intelligence was investigated to confirm the validity. As a result of the analysis, it was found that all the contents set were suitable except for some of the detailed goals of the first grade elementary school stages. Accordingly, a digital culture curriculum for artificial intelligence education was presented by revising and supplementing the detailed goals of the first graders.