• IE interfaces
• /
• v.16 no.2
• /
• pp.140-148
• /
• 2003

This study was performed to measure the various dimensions of the hand for Korean adults. Three hundred and eighteen males and two hundred and sixty females, age ranged 18 to 60, participated in this study. Thirty-five dimensions were selected to measure. Subjects were divided into three age groups, 18 to 29, 30 to 39, and 40 to 60, for each sex. The data were analyzed to see the differences between the age groups and sex by using SAS program. The results showed that the measurements related to breadth and thickness tended to increase as the age increased. Wrist breadth, index finger breadth(distal), index finger breadth(proximal), thumb breadth, and index finger thickness(proximal) increased as the age increased for both males and females (p<0.05). However, the measurements related to length tended to increase as the age decreased. The relationship between the parts that are length related showed high correlation. Hand length showed high correlation with palm length, middle finger length and index finger length. Males' were significantly greater than females' in every dimension (p<0.05). Also, the results of this study were compared with the data of Japanese and U.S. army. The results of this study can be used to design the hand related products.

• Computers and Concrete
• /
• v.9 no.5
• /
• pp.327-340
• /
• 2012

The search for a design that meets both performance and safety, with minimal cost and lesser environmental impact was always the goal of structural engineers. In general, the design of conventional reinforced concrete structures is an iterative process based on rules of thumb established from the personal experience and intuition of the designer. However, such procedure makes the design process exhaustive and only occasionally leads to the best solution. In such context, this work presents the development and implementation of a mathematical formulation for obtaining optimal sections of reinforced concrete columns subjected to uniaxial flexural compression, based on the verification of strength proposed by the Brazilian standard NBR 6118 (ABNT 2007). To minimize the cost of the reinforced concrete columns, the Simulated Annealing optimization method was used, in which the amount and diameters of the reinforcement bars and the dimensions of the columns cross sections were considered as discrete variables. The results obtained were compared to those obtained from the conventional design procedure and other optimization methods, in an attempt to verify the influence of resistance class, variations in the magnitudes of bending moment and axial force, and material costs on the optimal design of reinforced concrete columns subjected to uniaxial flexural compression.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.115-121
• /
• 1999

Marine casualties of dangerous cargo carriers lead to not only the loss of human life and properties, but also marine pollution caused by spilled oil and hazardous cargo. So the prevention of marine casualties and emergence response to minimize pollution are very important problems to be settled. But until now, most of salvage assistance jobs have been done based on rule of thumb without any technical support. It is not easy to cope with the incidents safely and rapidly under the current situation. The purpose of this paper is to develop a systematic and engineering salvage assistance tool available in the casualty sites. This paper contains the construction of salvage system, classification of technical items, and prototype system for the safety assessment. The developed system enable a salvage engineer in his/her salvaging jobs to perform safely and promptly.

• Information and Communications Magazine
• /
• v.4 no.4
• /
• pp.505-524
• /
• 1987

Nowaday all the countries of the world have studied the various problems caused in operating their own ports efficiently. Ship delay in the port is attributal to the inefficient operation in the navigation aids, the cargo handling, the storage and transfer facilities, and to the inefficient allocation of gangs or to a bad service for ships. Among these elements the allocation of gangs is the predominating factor in minimizing ship's turn round time. At present, in the case of Pusan Port. the labour union and stevedoring companies allocate gangs in every hatches of ships by a rule of thumb, just placing emphasis on minimizing ship's turn round time, without applying the principle of allocation during the cargo handling. Owing to this the efficiency of the cargo handling could not be expected to be maximized and this unsystematic operation result in supplying human resources of much unnecessary surplus gangs. Therefore in this paper the optimal size and allocation of gangs for minimizing the ship's turn round time is studied and formularized. For the determination of the priority for allocation the evaluation function, namely $F=PHi^{n}{\times}(W+H)$, can be obtained; where, PHI : Principal Hatch Index W : Total Cargo Weight represented in Gang-Shifts H : Total Number of Ship's hatches and also for the optimal size of gangs the average number of gang allocated per shift (Ng), namely Ng=W/PHI, is used. The proposed algorithm is applied to Pusan Port and its validity is verified.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1588-1593
• /
• 2008

This paper describes a real-time isometric pinch force prediction algorithm from surface electromyogram (sEMG) using multilayer perceptron (MLP) for human robot interactive applications. The activities of seven muscles which are observable from surface electrodes and also related to the movements of the thumb and index finger joints were recorded during pinch force experiments. For the successful implementation of the real-time prediction algorithm, an off-line analysis was performed using the recorded activities. Four muscles were selected for the force prediction by using the Fisher linear discriminant analysis among seven muscles, and the four muscle activities provided effective information for mapping sEMG to the pinch force. The MLP structure was designed to make training efficient and to avoid both under- and over-fitting problems. The pinch force prediction algorithm was tested on five volunteers and the results were evaluated using two criteria: normalized root mean squared error (NRMSE) and correlation (CORR). The training time for the subjects was only 2 min 29 sec, but the prediction results were successful with NRMSE = 0.112 ${\pm}$ 0.082 and CORR = 0.932 ${\pm}$ 0.058. These results imply that the proposed algorithm is useful to measure the produced pinch force without force sensors in real-time. The possible applications include controlling bionic finger robot systems to overcome finger paralysis or amputation.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.1
• /
• pp.55-61
• /
• 1989

Nowadays much efforts for evaluating the productivity of port physical distribution system to meet the rapid change of the port and shipping circumstances has been made continuously all over the world. The major part of these efforts is the improvement of the productivity of cargo handling system. The cargo equipment system as infrastructure in the cargo handling system is organized well in some degrees, but the management system of manpower as upper structure is still remained in an insufficient degree. There is little study, so far, on a systematic research for the management of port labor gang, and even those were mainly depended on rule of thumb. The object of this study is to introduce the method of optimal allocation and assignment for the labor gang in single ship, which was suggested as a first stage in dealing with them generally. The problem of optimal allocation and assignment of the labor gang can be (I) formalized with multi-stage allocation and assignment of the labor gang can be. (II) dealt with two stages in form of hierarchic structure and moreover, (III) The optimal size of labor gang was obtained through dynamic programming from the point of minimizing the summation of labor gang in every stage, (IV) For the problem of optimal assignment, the optimal policy was determined at the point of minimizing the summation of movement between hatches.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.67-74
• /
• 2018

Korean nail-beauty is mainly concentrated on women in their 20s and 40s. The purpose of this study is to investigate the structure and characteristics of nails based on the literature and to measure the nail size of adult women in their 20s to 40s as an empirical study. The purpose of this study is to utilize the measurement results as basic data for the standardization of nail size through comparative study with previous studies. For the study method, 150 (50 for each age group) adult female in 20 ~ 40 years with cuticle removed for 30 days from September 17 to October 16, 2017 were measured. As the result, As a result of measurements, the width of the nail was almost similar to that of the researcher. However, the thumb was 1.01 mm longer than the results of the previous researchers. The index nail was 1.12 mm longer, the middle nail was 0.82 mm longer, and the ring nail was 1.3 mm longer than the previous study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1453-1463
• /
• 2004

The conventional image segmentation method using level set has been disadvantage since level set function in the gradient-based model evolves depending on the local profile of the edge. In this paper, a new model is introduced by hybridizing level set formulation and complementary smooth function in order to smooth the driving force. We consider an alternative way of getting the complementary function(CF) which is much easier to simulate and makes sense for most cases having no triple junctions. The rule of thumb is that CF must be computed such that the difference between their average and the original CF function should be able to introduce a reliable driving force for the evolution of the level set function. This proposed hybrid method tries to minimize drawbacks the conventional level set method.

• Membrane and Water Treatment
• /
• v.3 no.4
• /
• pp.253-266
• /
• 2012

In this work, the effect of hybrid salts precipitation-nanofiltration (SP-NF) process on the scale deposits in thermal and membrane desalination processes has been studied. The analysis was carried out to study the scale formation from the Arabian Gulf seawater in MSF and RO reference processes by changing the percentage of pretreatment from 0 to 100%. Four different SP-NF configurations were suggested. A targeted Top Brine Temperature (TBT) of $130^{\circ}C$ may be achieved if 30% portion is pretreated by SP and/or NF processes. As a rule of thumb, each 1% pretreatment portion increases the reference TBT of $115^{\circ}C$ by $0.6^{\circ}C$. For both MSF and RO, parallel pretreatment of certain percentage of the feed by SP and the rest by NF, showed the lowest scale values. The case showed the best values for sulfate scale prevention and the highest values of increasing the monovalent ions relative to the divalent scale forming ions. Sulfate scale is significant in MSF process while carbonate scale is significant in RO. Salt precipitation was suggested because it is less costly than nanofiltration, but nanofiltration was used here because it is efficient in sulfate ions removal.

• Journal of Biomedical Engineering Research
• /
• v.42 no.4
• /
• pp.186-192
• /
• 2021

In this paper, we evaluated prediction accuracy of Euler angle spectrograph classification method using a convolutional neural networks (CNN) for hand gesture recognition in augmented reality (AR) cognitive rehabilitation system based on Leap Motion Controller (LMC). Hand gesture recognition methods using a conventional support vector machine (SVM) show 91.3% accuracy in multiple motions. In this paper, five hand gestures ("Promise", "Bunny", "Close", "Victory", and "Thumb") are selected and measured 100 times for testing the utility of spectral classification techniques. Validation results for the five hand gestures were able to be correctly predicted 100% of the time, indicating superior recognition accuracy than those of conventional SVM methods. The hand motion recognition using CNN meant to be applied more useful to AR cognitive rehabilitation training systems based on LMC than sign language recognition using SVM.