• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.123-129
• /
• 2023

MIMO antenna is a field in which various researches have been actively conducted for a long time, and its design concept is universally well known. However, Unlike conventional MIMO antennas, MIMO antennas for autonomous driving radars, which have recently been attracting attention, are designed in W-band which is a millimeter wave band, and must also meet novel design conditions to satisfy the performance of autonomous driving radars. Therefore, a novel and different approach is required for the design and beam pattern verification of the MIMO antenna for autonomous driving radar. In this paper, a MIMO antenna is designed and the design process to satisfy the conditions of a W-band autonomous driving radar is introduced, and proposes a beam pattern verification method for a W-band MIMO antenna mounted on an autonomous driving radar system.

• Journal of Yeungnam Medical Science
• /
• v.1 no.1
• /
• pp.41-48
• /
• 1984

The soil bacterium Agrobacterium tumefaciens is a plant pathogen that cause3 crown gall tumors by infecting the wounded dicotyledonous plants and subsequent integration of bacterial DNA into plant nuclear DNA. Virulent A. tumefaciens strains harbor a large Ti (tumor-inducing) plasmid that carries genes essential for tumorigenesis. In the present study, 13 strains (Malus pumila Mill; $A_{1-3}$, Populus monilifera; $W_{1-6}$, Populus tomentiglandlosa; $P_{1-3}$ and Rosa species; $R_1$) of Agrobacterium isolated in korean crown gall tumors and plasmids were observed in 6 strains ($W_2$, $W_3$, $W_6$, $P_1$, $P_3$ and $A_2$). The test for crown gall tumor formation was resulted only in ATCC15955 and $KW_2$ strains inoculated into the stem of sun flower and the development was observed for 4 and 6 weeks after inoculation. Above two Ti plasmids (pTi) were purified by cesium chloride-ethidium bromide density gradient centrifugation and digested with restriction enzyme and fragments of pTiATCC 15955 and $pTiKW_2$ observed by EcoR I ; 25&27, Hind III; 23&21, BamH I ; each 20 and Hpa I ; 12&27, and sizes of pTiATCC15955 and and $pTiKW_2$ calculated as 200 and 87 kbases. Octopine was isolated from tumor tissue ($W_{1-6}$ and $P_{1-3}$) and these strains confirmed as octopine type.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.273-280
• /
• 2021

The water resistance is important factor for sunscreen formulations. Generally a sunscreen cream was formulated by a water-in-oil (W/O) emulsion. In the W/O emulsion system, silicone oils are added to improve the texture of formulations. Silicone oils have low compatibility with organic sunscreen agent, causing problems with the stability in emulsion. In this study, the compatibility between various oils in the W/O emulsion was derived numerically using Hansen solubility parameter (HSP) at first. HSP is represented a dispersion degree, a polarity, and a hydrgen bond in a composition. In this study, various emulsions were prepared according to the types of oils with different HSP values and then monitored by a viscosity and morphology according to the time and temperature. The HSP values of components and the experimental results have similar activities for the stability of emulsions. HSP made it easy to select oil with high compatibility. When the compatibility of the oil phase in the W/O emulsion was high, the viscosity change over time was small. The stability was improved under the freeze-thaw cycle (-15 ℃ ~ 45 ℃). In the future, if the composition of the ingredients is optimized through HSP, it is expected that it will be helpful in the development of W/O type sunscreen formulations that are excellent in use and stability.

• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.58-62
• /
• 2012

Unlike conventional single special cut methods, W-EDM is a combination of multiple-effects. This study focuses on the effects of second cut on the roughness of surfaces treated with W-EDM. W-EDM is, to a large extent, typical unmanned-machining equipment, which represents NC machining equipment that allows long-time full automation. W-EMD is getting popular as a precise machining technology and STD11 is frequently used in press die manufacture. In this study, the former is applied to the latter to look at the effects of second cut on the roughness of surfaces treated with W-EDM.

• Journal of the Korean Mathematical Society
• /
• v.55 no.3
• /
• pp.671-694
• /
• 2018

In this paper, we investigate the weighted vector-valued bounds for a class of multilinear singular integral operators, and its commutators, from $L^{p_1}(l^{q_1};\;{\mathbb{R}}^n,\;w_1){\times}{\cdots}{\times}L^{p_m}(l^{q_m};\;{\mathbb{R}}^n,\;w_m)$ to $L^p(l^q;\;{\mathbb{R}}^n,\;{\nu}_{\vec{w}})$, with $p_1,{\cdots},p_m$, $q_1,{\cdots},q_m{\in}(1,\;{\infty})$, $1/p=1/p_1+{\cdots}+1/p_m$, $1/q=1/q_1+{\cdots}+1/q_m$ and ${\vec{w}}=(w_1,{\cdots},w_m)$ a multiple $A_{\vec{P}}$ weights. Our argument also leads to the weighted weak type endpoint estimates for the commutators. As applications, we obtain some new weighted estimates for the $Calder{\acute{o}}n$ commutator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.101-108
• /
• 2006

This paper describes the design, fabrication, and measured results of a W-band Cassegrain antenna suitable for the target detecting fuze sensor. The Cassegrain antenna is designed using MATLAB and MWS of CST. We use the multi-mode horn antenna as a feeder. The measurement results are as follows: The gain is about 41dB; SLL is 17.7dB; 3dB beamwidth is about $1.51^{\circ}$ in E-plane and $1.45^{\circ}$ in H-plane. The magnitude of leakage signals is about 43.5mVpp when the fabricated antenna and the transceiver of the fuze sensor ire combined. As a result, the designed W-band Cassegrain antenna could be quite applicable to the target detecting fuze sensor.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.1
• /
• pp.115-137
• /
• 2018

Let $R_{u{^2},v^2,w^2,p}$ be a finite non chain ring ${\mathbb{F}}_p[u,v,w]{\langle}u^2,\;v^2,\;w^2,\;uv-vu,\;vw-wv,\;uw-wu{\rangle}$, where p is a prime number. This ring is a part of family of Frobenius rings. In this paper, we explore the structures of cyclic codes over the ring $R_{u{^2},v^2,w^2,p}$ of arbitrary length. We obtain a unique set of generators for these codes and also characterize free cyclic codes. We show that Gray images of cyclic codes are 8-quasicyclic binary linear codes of length 8n over ${\mathbb{F}}_p$. We also determine the rank and the Hamming distance for these codes. At last, we have given some examples.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.195-205
• /
• 1997

The propulsion marine diesel engine have been widely applied with a mechanical- hydraulic governor to control the ship speed for long time. But it was recently very difficult for the mechani¬cal - hydraulic governor to control the speed of engine under the condition of low speed and low load because of jiggling by rough fluctuation of rotating torque and hunting by dead time of Desiel engnie The performance improvement of mechanical - hydraulic governor is required to solve these problems of control system. The electro - hydraulic governor using PID algorithm is provided to compensate the faults of mechanical- hydraulic governor. In this paper, in order to analyze the ship speed control system, the transfer function was converted from the z tansformation to w transformation. The influence of dead time changing by engine speed which induces hunting phenomena was investigated by Nichols chart of w plane. As a method of performance improvement of mechanical hydraulic governor, a Eletro - hydraulic governor shows that fine control results can be obtained through optimal parameter tuning of PID

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.43-45
• /
• 1988

Four W/Cu system(60wt%W-40wt%Cu, -0.lwt%Ni, -0.5wt%Ni, -0.lwt%C) and four WC/Cu system(60wt%WC-40wt%Cu, -0.lwt%Ni, -0.5wt%Ni, 0.lwt%C) electrical contacts were prepared by a press-sinter-infiltration process to compare with their properties. Hardness and electrical conductivity are proportional to the refractory metal(W or WC) properties and showed the effect of additives. Arc erosion trend of switch test is changed by current level. High currant test at 1kA showed a different crack formation pattern and erosion mode between W/Cu system and WC/Cu system contacts.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.22-26
• /
• 2016

In this paper, we measured the efficiency of the receiver for 5.8GHz Microwave Smartphone Charging. We have designed and fabricated 1W and 2W power amplifier, respectively. A 1W power amplifier used a TC3531 power device of TRANSCOM Inc. In addition, a 2W power amplifier using the two TC3531 devices was constructed with divider and combiner. We used the Wilkinson divider theory for divider and combiner. The voltage was measured using the 1W and 2W power amplifier and integrated receivers to the distance of 50cm.