• Korean Journal of Food Science and Technology
• /
• v.18 no.4
• /
• pp.301-305
• /
• 1986

Fatty acid composition of domestic margarines (summer 12, winter 12 kinds) and foreign margarines (U.S.A. 4, Japan 8, Denmark 2 kinds) for home use were determined. The major fatty acids were palmitic acid (16:0), stearic acid (18:0), oleic acid (18:1), linoleic acid (18:2) and linolenic acid (18:3) in all of the margarines. P/S ratios of winter products were $0.40{\sim}l.74$, those of summer products were $0.21{\sim}l.82$ in domestic margarines. Therefore degree of polyunsaturate in winter product was higher than that in summer product. P/S ratios of foreign margarines were $0.82{\sim}2.91$ irrespective of type.P/Sratios of stick and soft type in foreign margarines were similar as $0.82{\sim}2.59,\;0.90{\sim}2.67$, respectively Those of PUFA (polyunsaturated fatty acid) type and LFS (low fat spread) were 2.91, 2.70, respectively.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.557-563
• /
• 2009

This study is on the properties of inorganic porous calcium silicate material made from silica powder through the autoclaving curing, the results of this study should be utilized fundamental data for the development of noise reduction porous solid material using siliceous byproduct generated by various manufacture process. For the manufacture of autoclave curing specimen, various calcareous materials used and siliceous materials used silica powder. In this study, properties in density and compressive strength according to the change of W/B and C/S ratio, microscopy for the shape of pore, SEM and XRD for the examination of hydrate after autoclave curing are carried out respectively. The test results shown that the more slurry density decrease, the more W/B increase at the fresh state, this tendency shown similar to in hardened state. Among the specimens of C/S ratio, the compressive strength of C/S ratio of 0.85 gave the highest the compressive strength. In the results of XRD, tobermorite generated by autoclaving curing was created all of specimens regardless of C/S ratio. To ascertain pore structure, we compared with existing porous calcium silicate product(ALC, organic sound absorbing porous material). The results of microscope observation, pore structure of specimen of this study was similar to that of existing inorganic sound absorbing foam concrete. therefore, we could conformed a possibility of sound absorbing porous solid material on the basis of the results.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.189-194
• /
• 1983

Raw and extruded barleys prepared by three different conditions were powdered and stored for four months at ambient $(25^{\circ}C)$ and accelerated temperatures $(40^{\circ}C)$ with $A_w$ of 0.31 and 0.71, respectively. The stability of the these samples with respect to lipid oxidation was studied. The lipid oxidation of all samples, as measured by the lipid diene conjugation of the extracted oil, increased with increased $A_w$ and temperature and with the storage time elapsed. The ratio of unsaturated to saturated fatty acids (U/S ratio) tended to decreased as the $A_w$ and temperature were increased. The raw sample had a greater increase in lipid conjugation diene but a decrease in U/S ratio than the extruded samples. The extruded sample containing the added sucrose had greater lipid stability than the other extruded samples. Lipid free-amino group content in all samples decreased with increased $A_w$ and temperature.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.122-128
• /
• 1997

A pot experiment was carried out using Seomjin-byeo and Samgang-byeo to investigate the effects of nitrogen and sulfur on the growth, yields, and sulfur containing amino acid content of rice. The yields and number of tillers at 50 days after transplanting were increased with the increase of the amounts of nitrogen and sulfur, but N/S ratio was decreased in both varieties. There were a positive correlations between yield and contents of nitrogen and sulfur in straw and brown rice, but a negative correlation between N/S ratio and yields at harvesting stage. Crude protein contents increased with the increase of amounts of nitrogen and sulfur. contents of amino acid containing sulfur in brown rice were positively correlated with the sulfur and nitrogen contents in rice straw.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.5
• /
• pp.747-753
• /
• 2006

Air flotation is a solid-liquid separation process that utilizes up-flow microbubbles to thicken activated sludge and enhance clarification efficiency. Continuous air flotation experiments were performed to investigate the effect of operation parameters such as initial MLSS (mixed liquor suspended solid) concentration, air pressure, surface loading rate, air to solid (A/S) ratio, and flotation time on thickening efficiency. An initial activated sludge concentration ranged from 3,000 to 12,000mgSS/L and thickened sludge concentration varied from 6,400 to 28,100mgSS/L. The result showed that the thickening efficiency was mainly dependent on surface loading rate, A/S ratio, and flotation time. The pressure did not affect the thickening efficiency when it kept in the range of 1.6 to 1.8 bar. Experimental results showed that the thickening efficiency of activated sludge was increased only when the feed sludge concentration exceeded 5,000mgSS/L and the thickened concentration was over 20,000mgSS/L. At this time, SS concentration in the clarified liquid was ranged from 5 to 10mg/L.

• 연구논문집
• /
• s.28
• /
• pp.161-172
• /
• 1998

In the recycling industry, the recuperation of zinc from Electric Arc Furnace dust by the Waelz process generates important quantities of slag. This slag presents good mechanical properties, and for the most siliceous slag. a high stability which would enable its use by total or partial substitution of certain granulates in civil engineering Our study (within the framwork of a European programme cofunded by the European Commission-DGXII) concerns the physico-chemical and mineralogical characterization and leaching behaviour of several types of Waelz slag. The leaching tests are regulatory tests and specific characterization tests of leaching behaviour. They take into account the influence of several main parameters of the valorization scenarios envisaged for the slag(e.g. pH, Redox potential, chemical nature of the leachant, type of contact-liquid/ solid etc.).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.288-288
• /
• 2011

최근 들어 관측된 강우-유출 사상으로부터 유출곡선지수(Runoff curve number, CN)를 계산하는 연구가 수행되어왔으며, 이것은 기존 선행토양함수조건(Antecedent Moisture Condition; AMC) 을 이용한 유출곡선지수 적용에 대한 여러 문제점(AMC 기준의 타당성, 초기손실우량과 최대잠재보유수량의 비($I_a$ S=0.20의 적정성))이 부각되면서 선행유출조건을 이용한 유출곡선지수가 제안되었다. 본 연구에서는 선행유출조건(Antecedent Runoff Condition, ARC) 방법을 적용하여 IHP유역인 방림과 상안미 유역의 강우-유출자료로부터 CN을 직접 산정하였다. 먼저 방림과 상안미 유역에서 각각 12개, 10개의 관측된 강우-유출 사상을 통해 초기손실우량과 최대잠재보유수량의 비($I_a$/S)가 기존 가정의 0.20보다 작은 것을 확인하고 수정된 $I_a$/S비를 고려하여 대상 유역에서의 적정 CN을 산정하였다. 실제 강우-유출 사상에서 산정한 각 사상별 CN의 대표값을 찾기 위해 ARC-II의 평균유출조건으로 가정하여 각 사상별 단순평균과 4개의 지속기간(4시간, 3시간, 2시간, 1시간)별로 구분하여 평균한 CN을 구분하였다. 이를 통해 계산된 유효우량과 관측 유효우량과 비교를 실시하였으며 각 사상을 단순 평균한 ARC-II 조건으로 가정하여 계산된 CN의 오차가 가장 작은 것으로 나타났다. 따라서 기존의 선행토양함수조건(Antecedent soil moisture condition, AMC)의 CN으로 산정된 유효우량과 ARC조건으로 산정된 유효우량을 비교한 결과 방림유역에서 는 오차가 ARC 방법의 경우 37.76%, AMC 방법의 경우 51.27%로 평가되었고 상안미 유역에서는 오차가 ARC의 경우 31.97%, AMC 방법의 경우43.08%로 두 유역에서 모두 ARC 방법으로 산정된 CN이 더 적은 오차값을 주었다. 따라서 방림과 상안미 유역에서의 ARC로 산정된 CN값은 유효우량 산정의 정확성을 향상시킬 수 있으리라 판단된다.

• Journal of Korea Foundry Society
• /
• v.29 no.6
• /
• pp.270-276
• /
• 2009

After casting button-type small ingots of ternary Fe-Mn-S alloys which had three different Mn/S ratios (1, 5 and 70) in a vacuum arc furnace, the effect of the ratio on the sulfide formation was investigated. In case of the Mn/S ratio of 1, if alloy composition was located in an iron-rich corner on a Fe-Mn-S ternary phase diagram, only duplex MnS-FeS sulfide films were observed in the grain boundary. If the alloy composition was located in the miscibility gap area of the phase diagram, primary globular dendritic sulfides and dendritic sulfide slags were generated within the grain and tubular monotectic sulfides were also detected in the grain boundary. When the Mn/S ratio was 5, if the alloy composition was in the iron-rich corner, only bead-like sulfides were generated. On the other hand, if the composition was in the miscibility gap area, globular dendritic sulfides and dendritic sulfide slags were generated in the form of primary sulfide inclusions and rod-like eutectic sulfides were observed in the grain boundary. Especially, if the contents of Mn and S increased more in the miscibility gap area of the phase diagram, primary globular sulfides containing iron intrusions were observed. In case of Mn/S ratio of 70, if the contents of Mn and S was decreased in the Fe corner of the phase diagram, only bead-like sulfides were observed in the grain boundary. Despite the composition was outside the miscibility gap area of the phase diagram, if the contents of Mn and S increased, clusters of fine sulfide particles as well as fine spherical primary monophase sulfides were observed in the grain boundary.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.545-548
• /
• 2008

In this study aluminium sulfate, Ca(OH)$_2$, K-R Slag and $Na_2SO_4$ were used as active admixtures and their concentration 1, 3, 5, 7 weight percent in cement. The physical properties of active admixtures cement mortar were investigated by flow test and compressive strength. It was found that the resulting active admixtures exhibited the higher compressive strength than OPC mortar up. From the test results, cement mortars added active admixture have a good fundamental property.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.198-207
• /
• 1999

Five core sediments acquired from the Lake Shihwa are analyzed for variations of sedimentary environment and heavy metal pollution after the Shihwa seawall construction. The depositional environment of the study area is divided into anoxic, oxic and mixed suboxic conditions based on the C/N ratio and C/S ratios of organic matters. Controlling factors for redox condition are the water depth and the difference in industrial effluents supply. Correlations among geochemical elements (Mn, U, Mo) show a distinctive difference and thus can be used as an indicator of redox condition. The content of Al, Ti are dependent on the sediment characteristics, and the contents of heavy metals (Cr, Ni, Cu, Zn, and Pb) indicate heavy metal pollution. The concentrations of heavy metals are higher near Shiswa-Banwol industrial complexies than the central part of Lake Shihwa. Especially, the accumulation of the heavy metal at the surface sediments near Shihwa-Banwol industrial complex are two to eight times higher than in the center of Lake Shihwa.