• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.11
• /
• pp.612-615
• /
• 2002

The main advantages of Disk type Single-Phase Switched Reluctance Motor (DSPSRM) is the simple construction, rugged structure, low manufacturing cost and simple driving circuit. It is especially possible to make the short axial length of DSPSRM. Therefore, it is suitable to setup this motor in a narrow space. This paper presents the shape design to maximize the average torque of DSPSRM that is achieved by 3D Finite Element Method (3D FEM) considering the nonlinear of magnetic material. The characteristics of two different rotor shapes are compared. The design parameters, such as the rotor and stator pole arc, are selected to the parametric study. The effect of pole arc ratios on the torque performance is investigated. From these results, the optimal pole arc to produce the maximum torque is determined.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.77-83
• /
• 1998

The most of the design engineers for construction has academic background of bachelors degree. Theories for advanced composite structures are too difficult for such engineers and some simple but accurate enough methods are necessary. The senior author has reported that some laminate orientations have decreasing values of B$_{16}$, B$_{26}$, D$_{26}$, and D$_{26}$ stiffnesses as the ply number increases. Such plates above behave as special orthotropic plates and simple formulas developed by the senior author［1, 3］ can be used. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms(M$_{x}$) on the relevant partial differential equations of equilibrium. In this paper, the result of the study on the subject problem is presented.ted.d.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.229-229
• /
• 2007

In this study, HEMA-based hydrophilic copolymers were synthesized and dielectric constant (K) of the polymer thin films were investigated by change hydroxyl group (-OH) ratio in the polymer chain. The different hydroxyl group ratios were characterized by FT-IR and its thin films were obtained by spin coating. As a result, due to the moisture absorption of the hydrophilic thin film, the dielectric constant has been increased as was expected. The highest dielectric constant (K=4.19, @1MHz) was observed at 40% hydroxyl group ratio among the several polymers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.355-365
• /
• 2017

In this paper, we propose the design of a dual-band GPS antenna using in-direct feeding pads. The antenna consists of an upper patch for the GPS L1 band, a lower patch for the GPS L2 band, and two pads on the middle layer for feeding the two radiating patches. A hybrid chip coupler with a phase difference of $90^{\circ}$ is employed at the two feeding ports for achieving a broad circular polarization (CP) bandwidth. The proposed antenna shows bore-sight gains of 3.0 dBic(L1) and 5.1 dBic(L2), and axial ratios of 3.3 dB(L1) and 0.3 dB(L2) by measurement. The active element patterns of the fabricated array with 7 elements show bore-sight gains of -0.4 dBic (L1) and -2.4 dBic(L2), respectively. It proves that the proposed antenna structure is suitable for use in GPS array applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.339-346
• /
• 1999

A RF receiver section for INMARSAT-C external mounting unit was designed, fabricated and evaluated. Using a INA-03184, the high gain amplifier consists of matched amplifier type. Active bias circuitry can be used to provide temperature stability without requiring the large voltage drop or relatively high-dissipated power needed with a bias stabilization resistor. The bandpass filter was used to reduce a spurious level. As a result, the characteristics of the receiver section implemented here show 60 dB in gain, 44.83 dBc in a spurious level. The voltage standing wave ratios(VSWR)of input output port are less than 1.8:1, respectively.

• Wind and Structures
• /
• v.31 no.3
• /
• pp.255-267
• /
• 2020

A systematic set of low-speed wind tunnel experiments was performed at Re = 6.5×10⁴ and 1.1×10⁵ to study the mean wind loading experienced by surface-mounted finite-height square prisms for different aspect ratios, incidence angles, and boundary layer thicknesses. The aspect ratio of the prism was varied from AR = 1 to 11 in small increments and the incidence angle was changed from α = 0° to 45° in increments of 1°. Two different boundary layer thicknesses were used: a thin boundary layer with δ/D = 0.8 and a thick boundary layer with δ/D = 2.0-2.2. The mean drag and lift coefficients were strong functions of AR, α, and δ/D, while the Strouhal number was mostly influenced by α. The critical incidence angle, at which the prism experiences minimum drag, maximum lift, and highest vortex shedding frequency, increased with AR, converged to a value of α_c = 18° ± 2° once AR was sufficiently high, and was relatively insensitive to changes in δ/D. A local maximum value of mean drag coefficient was identified for higher-AR prisms at low α. The overall behaviour of the force coefficients and Strouhal number with AR suggests the possibility of three flow regimes.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.189-194
• /
• 2002

Two-photon resonant third photon ionization of atomic bromine $(4p^5\;^2P_{3/2}\;and\;^2P_{1/2})$ has been studied using a photoelectron imaging spectroscopy in the wavelength region 250 - 278 nm. The technique has yielded simultaneously both relative branching ratios to the three levels of $Br^+(^3P_2,\;^3P_{0.1}\;and^1D_2)$ with $4p^4$ configuration and the angular distributions of outgoing photoelectrons. The product branching ratios reveal a strong propensity to populate particular levels in many cases. Several pathways have been documented for selective formation of $Br^+(^3P_2)$ and $Br^+(^3P_{0.1})$ ions. In general, the final ion level distributions are dominated by the preservation of the ion core configuration of a resonant excited state. Some deviations from this simple picture are discussed in terms of the configuration interaction of resonant states and the autoionization in the continuum. The photoelectron angular distributions are qualitatively similar for all transitions, with a positive $A_2$ anisotropy coefficient of 1.0-2.0 and negligible $A_4$ in most cases, which suggests that the angular distribution is mainly determined by the single-photon ionization process of a resonant excited state induced from the third photon absorption.

• Journal of the Korean Institute of Gas
• /
• v.12 no.1
• /
• pp.54-61
• /
• 2008

Experimental investigations were performed to assess the influences of different multiple obstacles on flame propagation in a rectangular confinement. Three different multiple obstacles were used: circular, triangular and square cross-sections with blockage ratios of 15% and 30%. The same method described in Park et al. [13] to investigate the interaction between the propagating flame and the obstacle was applied. Before the freely propagating flame impinged on the obstacle, the flame propagation speed remains close to the laminar burning velocity, regardless of the obstacles used. The reported data revealed that the trend in increase of the local flame propagation speed is a result of the interaction between the obstacle and the propagating flame front behind the obstacle. The local speed was found to increase from a circular to a triangular and a square obstacle. The mean flame speed was found to be less dependent on both the obstacle types and the different blockage ratios used.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.905-908
• /
• 2006

The diffuse attenuation coefficient for downwelling irradiance $(K_d({\lambda}))$ is an important parameter for ocean studies. Based on the optical profile data measured during three cruises in the northern South China Sea in autumn from 2003 to 2005, variations in the $K_d({\lambda})spectra$ were analyzed. The variability of $K_d({\lambda})$ shows much distinct features both in magnitude and spectra shape. The $K_d({\lambda})value$ are much higher in costal waters than that of open oceanic waters and the blue-to-green(443/555) ratios of $K_d({\lambda})$ tends to increases with the chlorophyll a concentration ([Chl a]) from open ocean to coastal waters. These characteristics can be explained primarily by the increasing of $a_{w+p}(433)/a_{w+p}(555)$ with [Chl a]. In the short waveband, the relation between $K_d({\lambda})-K_w({\lambda})$ and [Chl a] can be well described by a power law function, suggesting the large contribution of phytoplankton to the variations in $K_d({\lambda})$. As for the spectral model of the diffuse attenuation coefficient, there are good linear relationships between $K_d(490)$ and $K_d({\lambda})$ at other wavelengths, with the slope parameter and the intercept following linear functions within the spectral range $412{\sim}555$ nm. These variabilities of $K_d({\lambda})$ provided much useful information for us to study the bio-optical properties in the northern South China Sea.

• Korean journal of food and cookery science
• /
• v.3 no.2
• /
• pp.28-37
• /
• 1987

The changes of various cooking experiment (gelatinization, swelling, texture, water absorbance) and amino acid, fatty acid composition and the effect of digestibility on glucose examination (in vitro) were investigated at various rice during cooking by using milk. The results are summarized as follows. 1) In the effect of various water-to-rice ratios on the degree of absorbance of rice, Rice (using water) always showed higher absorbance than rice. (using milk) optimum water absorbance time were shown to be 40 minute for rice (using water) and 50 minute for rice (using milk). 2) The degree of gelatinization (D.G) by iodine colorimetric method increased proportionally according to the increase of water-to-rice ratio and rice cooking always showed higher D.G than rice milk cooking. When the same D.G rice milk cooking food required 40~50% higher water-to-rice ratios than rice cooking food. 3) Various rice cooking food, the palatability were best food by rice bean milk cooking food. 4) The main Amino acid composition of using milk rice cooked food were Glutenine, Leusine, Asparagine, Valine, Arginin above 42% of the Total Amino acid. The contents of Lysine and Methionine were 476.50mg, 412.16mg in using Milk rice cooking food. 5) Using rice Milk cooking food ana Rice bean Milk cooking food, rice cooking, rice bean cooking in phosphate Buffer, in vitro Enzymatic glucose were carried out in dialysis bag. During 90 minute of incubation at $37^{\circ}C$, reducing sugar were analyzed from dialysate. Starch digestibility measured from human Saliva, Sali a, Pencreatic Amylase treatment was high in Rice Milk cooking food, Rice bean Milk cooking food and rice cooking food and rice bean cooking food but remarkely low.