• Journal of applied mathematics & informatics
• /
• v.23 no.1_2
• /
• pp.127-140
• /
• 2007

We present the boundary value problem (BVP) for the heave motion due to a vertical circular cylinder in water of finite depth. The BVP is presented in terms of velocity potential function. The velocity potential is obtained by considering two regions, namely, interior region and exterior region. The solutions for these two regions are obtained by the method of separation of variables. The analytical expressions for the hydrodynamic coefficients are derived. Computational results are presented for various depth to radius and draft to radius ratios.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.2
• /
• pp.107-114
• /
• 2002

Rice straw silage added with apple pomace in different ratios were mixed with commercial concentrates and fed to Korean native goats in comparison to the corn silage mixed with the same content of commercial concentrates in whole diet as that of apple pomace added rice straw silage (rice straw : apple pomace = 100:0, 80:20, 60:40, 40:60). Dry matter intake, digestibilities of nutrients and nitrogen retention were investigated for the possibilities of application of agricultural by-products for the diets of Korean native goats. Crude protein contents of rice straw silage added with apple pomace were 6.3~7.3% and the contents of ADF, NDF and crude ash were highest in 100% rice straw mixed ratio (A) as 39.4, 61.6 and 8.9% respectively. Those were lower in corn silage (E) as 30.3, 53.4 and 4.9% respectively, however NSC content of corn silage was highest among the experimental treatments as 31.4%. Daily dry matter intakes per head and also per metabolic basal weight (DM g/kg of $BW^{0.75}$ were significantly (p<0.05) higher in D of the highest mixed ratio of apple pomace (605.3, 69.5g) than those of corn silage (E: 394.0, 46.8g). Daily live weight changes were significantly (p<0.05) higher in 40% (C: 16.7g) and 60% (D: 22.9g) apple pomace mixed ratios than 0% (A: 0.17g) and 20% (B: 4.3g) apple pomace mixed ratios. Digestibilities of dry matter and organic matter were higher in D and E than in A and B and those of ADF and NDF were higher in D as 50.2 and 57.4% respectively than the digestibilities in A, B and E. Nitrogen retention (g, %) was highest in D of the highest mixed apple pomace ratio (1.4g, 20.4%) however lowest in A (-0.3g, -7.75%).

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.227-231
• /
• 2011

An external optical modulation using absorption s in a Fabry-Perot laser diode (FP-LD), has been proposed and experimentally demonstrated for multicasting in a WDM-PON. The center wavelengths of absorption s in an FP-LD move to short-wavelength rapidly by only a small current (~1 mA) injection. If the current injection is stopped, the s move back to the original position. Such a movement of the s can make the FP-LD act as an external optical modulator, which is found to modulate at a maximum modulation speed of 800 Mbps or more. For a multicasting transmitter in a WDM-PON, the proposed modulator can be cost-effectively applied to a multi-wavelength laser source with the same periodicity of the longitudinal mode. Instead of the multi-wavelength laser source, tunable-LDs are used for experiments. The 32 channel multicasting system with the proposed modulator has been demonstrated, showing power penalties of 1.53~4.15 dB at a bit error rate of $10^{-9}$ with extinction ratios better than 14.5 dB at 622 Mbps.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.187-194
• /
• 2005

A PC-based 8-channel seismic system has been developed and applied for bedrock mapping in near shore environment. The system is composed of an analog signal processor and an A/D converter installed on the computer, and a streamer with the group interval of 5 meters. The system is accomplished with a data acquisition program which controls the system and a data processing software. With the PC-based shallow marine seismic survey system high-resolution 2-D marine seismic profiles which have high S/N ratios can be obtained after appropriate data processing.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.5
• /
• pp.582-590
• /
• 2005

The application of consomme prepared with different ratios of ground beef and ground chicken to improve taste preferences and the cost of foodstuffs was attempted by reviewing fundamental data and the effect on the sensory and physical characteristics of treatment These treatments were prepared with different ratios(9:1(A), 7:3(B), 5:5(C), 3:7(D), 1:9(E) w/w) of ground beef and ground chicken, respectively. Sensory properties were evaluated in the aspects of both acceptability and intensity. From the acceptability aspect, A treatment showed the highest scores in smell, B in mouthfeel and taste, A and B in color and overall acceptability, respectively. In terms of acceptability, B treatment was favored most for color, mouthfeel, taste and overall acceptability except smell. The more the ground chicken, the higher the intensity aspect E treatment showed higher values than A in all the intensity aspects. Moisture contents and crude proteins increased by increasing the mixed ratio of ground beef, whereas crude ash, solid matter and pH increased by increasing the mixed ratio of ground chicken. Tumidity values were the highest in E treatment, whereas the lowest in A. Tumidity values were increased significantly by increasing the mixed ratio of ground chicken. Viscosity increased by increasing the mixed ratio of ground chicken. The highest viscosity was shown in E treatment The colorimetric lightness values(L) decreased and redness(a), yellowness(b) and total color difference values(AE) increased significantly by increasing the mixed ratio of ground chicken. This experimental study showed that A and B treatment had the highest values in overall acceptability. The results of analysis in crude protein, solid matter, tumidity and viscosity were increased by increasing the mixed ratio of ground chicken. B treatment prepared with a ratio of 7:3 of ground beef and chicken had the most favorable sensory quality. These results suggested the basic information to improve acceptability and to save the costs of Consomme recipes for foodservice institutions.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.564-569
• /
• 2012

This paper proposes a hybrid-excited linear synchronous motor (LSM) that has potential applications in a magnetically levitated vehicle. The levitation and thrust force characteristics of the LSM are investigated by means of three-dimensional (3-D) numerical electromagnetic FEM calculations and experimental verification. Compared to a conventional LSM with electromagnets, a hybrid-excited LSM can improve levitation force/weight ratios, and reduce the power consumption of the vehicle. Because the two-dimensional (2-D) FE analysis model describes only the center section of the physical device, it cannot express the complex behavior of leakage flux, which this study is able to predicts along with levitation and thrust force characteristics by 3-D FEM calculations. A static force tester for a hybrid-excited LSM has been manufactured and tested in order to verify these predictions. The experimental results confirm the validity of the 3-D FEM calculation scheme for the description of a hybrid-excited LSM.

• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.634-641
• /
• 2022

A frequency stable and tunable optoelectronic oscillator (OEO) incorporating an optical phase shifter and a phase-shifted fiber Bragg grating (PS-FBG) is designed and analyzed. The frequency tunability of the OEO can be realized by using a tunable microwave photonic bandpass filter consisting of a PS-FBG, a phase modulator. The optical phase compensation loop is used to compensate for the phase variations of the RF signal from the OEO by adjusting an optical phase shifter. Simulation results demonstrate that the output RF signals of the OEO can be tuned in a frequency range of 118 MHz to 24.092 GHz. When the ambient temperature fluctuates within ±3.9 ℃, the frequency drifts of the output RF signals are less than 68 Hz, the side-mode suppression ratios are more than 69.39 dB, and the phase noise is less than -92.49 dBc/Hz at a 10 kHz offset frequency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.24-34
• /
• 2019

An automotive automatic transmission is a popular power-transmitting device in passenger vehicles, as it provides various speed ratios for diverse driving conditions with easy manipulation and smooth gear shifting. The transmission is mainly composed of input and output shafts, planetary gear sets, brakes/clutches, and housing, and it yields multiple forward gears and one reverse gear by actuating the shifting devices of the brakes and clutches. In developing a new transmission, kinematic configurations of a transmission, which presents a brief structure and actuation schemes for speed ratios, need to be checked to determine if the structure can be assembled in a layout. It is impossible for a transmission concept having any interference in connecting main components to be developed further in the design process, since connection interference leads to failure of a layout design in the 2-D plane. In this research, an analysis of the assemblability of a front-wheel drive automatic transmission is carried out on an example concept design by applying the vertex addition algorithm based on graph theory.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1282-1282
• /
• 2001

Near Infrared (NIR) spectra has long been used in industry to monitor rates of reactions via calculation of analyte concentrations. However, the kinetic information is inherent in the data through spectral ratios. Two-dimensional correlation spectroscopy (2D-COS) is a spectral method that is based on changes (e.g. concentration) in time and is therefore uniquely suited for reaction monitoring. This method is especially useful in the understanding of how the reaction(s) proceeds. We will show the application of 2D-COS to synthetic kinetic data from different reaction orders to illustrate the method. We will then show application to real reactions of various orders. Finally, we will illustrate how 2D-COS will be of specific interest to developing optimized industrial reactions.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.04a
• /
• pp.23-26
• /
• 2009

The purpose of this study is to investigate the fatigue safety and deformation of housing in plate rolling process. For this, we carried out 3-dimensional FEM analysis for housing considering design variations of housing structure. It showed that the housing with rounds under a column is benefits to control thickness accuracy of rolled material, due to smaller elastic deformation and maximum effective stress. Also, we calculated the fatigue safety factors, the ratios of the pulsating equivalent fatigue limit to the maximum tensile stresses analyzed using the equipment force and normal rolling force.