• The Journal of the Korea institute of electronic communication sciences
• /
• 제13권4호
• /
• pp.819-826
• /
• 2018

The generalized Hamming weight is one of the important parameters of the linear code. It determines the performance of the code when the linear codes are applied to a cryptographic system. In addition, when the block code is decoded by soft decision using the lattice diagram, it becomes a measure for evaluating the state complexity required for the implementation. In particular, a bit-parallel multiplier on finite fields based on trinomials have been studied. Cellular automata(CA) has superior randomness over LFSR due to its ability to update its state simultaneously by local interaction. In this paper, we deal with the efficient synthesis of the pseudo random number generator, which is one of the important factors in the design of effective cryptosystem. We analyze the property of the characteristic polynomial of the simple 90/150 transition rule block, and propose a synthesis algorithm of the reversible 90/150 CA corresponding to the trinomials $x^2^n+x^{2^n-1}+1$($n{\geq}2$) and the 90/150 reversible CA(RCA) corresponding to the maximum weight polynomial with $2^n$ degree by using this rule block.

• Journal of the Korean Geotechnical Society
• /
• 제25권5호
• /
• pp.75-86
• /
• 2009

Salt, one of the most common soluble materials in engineering soil, may have an effect on mechanical behaviors of soils under its cementation process. In order to investigate this natural phenomenon, non-soluble material by using glass beads is mixed with salt electrolyte and cemented by using oven to evaporate water. Three different sizes of glass bead particles, 0.26, 0.5, and 1.29 mm, with different salt concentration, 0, 0.1, 0.2, 0.5, 1.0, and 2.0M, are explored by using P- and S-waves, excited by bender elements and piezo disk elemets, respectively. The velocities of the P-wave and S-wave of the particulate medium cemented by salt show three stages with the degree of saturation: 1) S-wave velocities increase while P-wave velocities reduce with degree of saturation changing from 100% to 90%; 2) Both velocities are stable with degree of saturation varying from 90% to 10%; 3) The velocities change enormously when the specimens are nearly dry with degree of saturation from 10% to 0%. Besides, the resonance frequencies of S-wave show similar stages to the S-wave velocities. This study demonstrates meaningful trends of elastic wave characteristics of geo-materials according to the cementation of dissolved salt.

• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.615-622
• /
• 2000

This paper is relate to the result of pilot test in Asan. In order to evaluate the characteristics of behavior and deformation in Asan and to analyse the effect of soft ground treatment, preloading, two types of paper drain and pack drain were constructed in the ground. Settlement gauges, pressure meters, pressure cells and ground water gauges were monitored and also borings and piezoncone tests were performed. As a result of analyse, every vertical drained area was consolidated over 90% degree of consolidation but preloaded area was not reached to 90%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.391-394
• /
• 2000

EPDM/silicone blend was prepared with polyorganosiloxane compatibilizer for out-door polymer insulation used to shed. Each blend had various weight ratios, 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100 as EPDM to silicone, and electrical and tracking characteristics were studied with the method of IEC 60587. And also, tracking properties and contact angle related to UV-weathering period were studied to understand the degree of degradation of blend after 1000 h UV-weathering.

• Textile Coloration and Finishing
• /
• 제16권1호
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.

• Journal of the Korean Geosynthetics Society
• /
• 제19권1호
• /
• pp.1-9
• /
• 2020

This paper presents the results of experimental investigation on the effect of degree of saturation of soil on the pullout behavior of a geogrid. Different test variables were taken into account while performing the experiment including the soil physical conditions based on water content and external loading applied. The soil used was locally available weathered granite soil. The tests included variations in saturation of about 90%, 80%, 70% and 45% (optimum moisture content). The pullout tests were performed according to ASTM standard D 6706-01. The results indicate that increasing the degree of saturation in the soil decreases the pull-out capacity, which in turn decreases the interface friction angle and interaction coefficient. The decrease in the pullout interface coefficient was observed to be around 12.50% to 33.33% depending on the normal load and degree of saturation of the soil. The test results demonstrated the detrimental effect of increasing the degree of saturation within the reinforce soil on the pullout behavior of reinforcement, thus on the internal stability. The practical inferences of the outcomes are analyzed in detail.

• Clinical and Experimental Pediatrics
• /
• 제58권12호
• /
• pp.472-477
• /
• 2015

Purpose: Adherence to treatment with inhaled corticosteroids (ICS) is a critical determinant of asthma control. The objective of this study was to assess factors that determine adherence to ICS therapy in children with asthma. Methods: Fifty-eight children with asthma, aged 5 to 16 years, used ICS with or without a spacer for 3 months. Adherence rates as measured from questionnaires and canisters, asthma symptom scores, and inhalation technique scores were assessed every 30 days. The degree of supervision by caregivers was assessed at day 30. Results: Adherence rates measured using canisters were lower at day 60 than at day 30 (P=0.044) and did not change thereafter ($74.4%{\pm}17.4%$ at day 30, $66.5%{\pm}18.4%$ at day 60, and $67.4%{\pm}22.2%$ at day 90). Adherence rates at days 60 and 90 and during the total study period were significantly different when measured by using questionnaires versus canisters (P<0.001, P=0.022, and P =0.001, respectively). In the comparison of adherence rates repeatedly measured at days 30, 60, and 90 and adherence rates during the total study period among the 3 groups, adherence rates in the high-degree supervision group were significantly higher than those in the low-degree supervision group ($82.0{\pm}16.0$ vs. $66.1{\pm}14.5$, $75.4{\pm}14.4$ vs. $56.2{\pm}18.4$, $75.0{\pm}18.3$ vs. $55.0{\pm}19.7$ [P=0.027]; $77.9{\pm}12.2$ vs. $59.1{\pm}11.4$ [P=0.021]) after adjustment for sex and age. Conclusion: The level of caregiver supervision is an important factor affecting adherence to ICS therapy in children with asthma. Therefore, a high degree of supervision may be required to increase adherence to ICS therapy in children with asthma.

• Korean Journal of Food Science and Technology
• /
• 제15권2호
• /
• pp.155-159
• /
• 1983

Alpha-barley were prepared by means of soaking, heating, and drying treatment. The degree of gelatinization ${\alpha}-barley$ were determined. The yield of ${\alpha}-barley$ prepared by microwave heating, steaming, and autoclaving were in the range of 95-98%, whereas by boiling, only 74-89% of ${\alpha}-barley$ were obtained. The degree of gelatinization of ${\alpha}-barley$ prepared by 5 min microwave heating and 10 min and 20 min steaming were around 90%. Alpha-barley prepared by boiling, autoclaving and 30 min steaming showed above 95% of degree of gelatinization.

• Korean Journal of Human Ecology
• /
• 제24권4호
• /
• pp.555-569
• /
• 2015

During a design process of a protective equipment for sports activities, minimizing movement restrictions is important for enhancing its functions particularly for protection. This study presents a three-dimensional(3D) modeling methodology for designing baseball catcher's leg guards that will allow maximum possible performance, while providing necessary protection. 3D scanning is performed on three positions frequently used by a catcher during the course of a game by putting markings on the subject's legs at 3cm intervals : a standing, a half squat with knees bent to 90 degrees and 120 degrees of knee flexion. Using data obtained from the 3D scan, we analyzed the changes in skin length, radii of curvatures, and cross-sectional shapes, depending on the degree of knee flexion. The results of the analysis were used to decide an on the ideal segmentation of the leg guards by modeling posture. Knee flexions to 90 degrees and to $120^{\circ}$ induced lengthwise extensions than a standing. In particular, the vertical length from the center of the leg increases to a substantially higher degree when compared to those increased from the inner and the outer side of the leg. The degree of extension is varied by positions. Therefore, the leg guards are segmented at points where the rate of increase changed. It resulted in a three-part segmentation of the leg guards at the thigh, the knee, and the shin. Since the 120 degree knee-flexion posture can accommodate other positions as well, the related 3D data are used for modeling Leg Guard (A) with the loft method. At the same time, Leg Guard (B) was modeled with two-part segmentation without separating the knee and the shin as in existing products. A biomechanical analysis of the new design is performed by simulating a 3D dynamic analysis. The analysis revealed that the three-part type (A) leg guards required less energy from the human body than the two-part type (B).

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제20권3호
• /
• pp.272-275
• /
• 1991

The effects of storage temperature and relative humidity (RH), and immersion treatment (30min) of sliced onions in various soluble starch solutions(1-3%; w/v) at $25^{\circ}C$ before air dehydration on caking and water absorption degree of powedered onion were analyzed. In the range of 15 to $35^{\circ}C$, the caking tendency of powdered onion increased with temperature at a constant RH (70% RH). The caking degree of powdered onion also increased as increasing the storage RH, at $25^{\circ}C$. Storage starchpreteatment significantly reduced the water absorption and caking degree of powdered onion under ambient condition. A pretreatment of soluble starch solution(3%) reduced almost 80% the caking of powdered onion compared to that of control.