• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.392-396
• /
• 1995

Chitosan was prepared from red snow crab (Chinonecetes japonicus) under various conditions of deacetylation (NaOH concentration, heating temperature, heating time and intermittent and repetition treatment). By measuring the degree of deacetylation and the molecular weight (Mw), effect of preparation condition was studied. As the concentration of NaOH increased in deacetylation process, for chitosan treated over $40\%$ NaOH, the rate of increase of the deacetylation of chitosan decreased, but the difference of Mw decrease was nearly constant. When treatment temperature increased from $130^{\circ}C$ to $150^{\circ}C$, the deacetylation degree increased only $3^{\circ}C\;from\;84\%\;to\;87\%,$ but Mw decreased from 267,000 to 85,800. The difference of Mw decrease of chitosan treated $130-150^{\circ}C$ was larger than that with $90-130^{\circ}C$. The deacetylation degree and Mw of the chitosan prepared by continuous treatment for 3 hrs was$84\%$ and 267,000. On the other hand those of chitosan with intermittent and repetition treatment for 3hrs was $93\%$ and 28,000. In order to increase the degree of deacetylation and inhibit depolymerizing, the intermittent and repetition treatment was found to be more effective than the continuous treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2760-2766
• /
• 2013

Introduction : The projection method to check existence and nonexistence of radius groove penetration of screw after distal radius fracture operation clinical using the T-type plate and the radiation of radial groove tangential is to propose a new test. Material and Methods : On the tangential projection view of radius groove, elevation angle of distal radius is 2.5, 5, 7.5, 10 degree. and forearm and radiation detector of angle is 60, 70, 80, degree each changed. that analyzed check existence and nonexistence of radius groove penetration of screw. Results : For the image of Radial groove tangential. the case of not radius groove penetration of screw(63.95%, n=55), medial penetration of radius groove(10.47%, n=9) or lateral penetration of radius groove(25.58%, n=22) was analysis. The radius groove penetrating of screw length was a range of 0.43 ~ 2.72mm, the average was 1.06mm. the check existence and nonexistence of radius groove penetration of medial or lateral was analysis that it accurate for the image of Radial groove tangential. the radiography of radial groove is well described elevation angle of distal radius 2.5 to 7.5 degree(90% over), forearm and radiation detector of angle 70degree(80%over) Conclusion : It is elevation angle of distal radius is 5degree, forearm and radiation detector of angle 70degree recommended.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.271-275
• /
• 2001

Three dimensional flow characteristics in a liquid fuel ramjet combustor are investigated using PIV method. The combustors have two rectangular inlets that form 90 degree each other. Three guide vane is installed in each rectangular inlet to improve the flow stability. We made three cases of test combustors in which those inlet angles are 30 degree, 45 degree and 60 degree. Each combustor easily changes the size of combustor's recirculation zone with the replacement of combustors dome. The experiments are performed in the water tunnel test with the same Reynolds number in the case of Mach 0.3 at inlet. PIV software is developed to measure the flow field in the combustor and the accuracy of developed PIV program is verified with rotating disk experiment and standard data. The experimental results show that the two main streams from rectangular inlet collide near the plane of symmetry and generate two large longitudinal vortex, A large and complex three-dimensional recirculating flow is measured in the recirculation zone.

• Journal of Korean Public Health Nursing
• /
• v.15 no.1
• /
• pp.125-147
• /
• 2001

The objective of study is to investigate the degree of burden of family who care for the elderly with dementia and to find out the factors related to the family burden as a pilot study. The number of subjects was total 137 and they were the families who were caring for elderly with dementia. The data was analyzed by SPSS/PC, t-test ANOVA. The results were as follows: 1. The score of family burden who were caring for elderly with dementia was 2.90 and the score of burden was high in case of the limitation of indivisual social activities. which was 3.09 and the lowest score was in case of the health of physical and limited which was 2.58 2. There was the correlation the level of dementia and the degree of burden of family who care for the elderly with dementia in character of dementia (p<0.05). 3. There was the correlation between the abnormal activities of the elderly with dementia and the degree of burdens of family (r=0.330). 4. There was the correlation between ADL of the elderly with dementia and the degree of burdens of family (r=-0.330). 5. The service duration had statistically significant correlation with burden In the character of family (P<0.05). 6. The using facility had statistically significant correlations with burden in the character of socity (P<0.05).

• Journal of the Korean Society of Costume
• /
• v.56 no.2 s.101
• /
• pp.147-154
• /
• 2006

In this study 1, the dyeability and sun protection characteristic of the fabrics dyed with pine needles extract was investigated. In the test of color difference, the surface color of all the dyed fabric of both cotton and silk came to light as greenish yellow. In the test of dyeing colorfastness, the colorfastness to sunlight of dyed cotton fabric was below 2nd grade and the one of dyed silk fabric was below 3rd grade. The colorfastness to laundry for the degree of discoloration showed a difference as to mordants, but the colorfastness to laundry for the degree of contamination was excellent as all the dyed fabrics were 4th-5th grade. The colorfastness to perspiration was excellent as the degree of discoloration was more than 3rd grade and the degree of contamination was more than 4th-5th grade. The colorfastness to rubbing showed the excellent result as all the dyed fabrics were 4th-5th grade. In the test of sun protection factor(SPF), the cotton and silk fabrics dyed with $FeSO_4{\cdot}7H_{2}O$ mordant showed very high sun protection characteristic as the SPF was each 36.1 and 42.5. In the test of sun protection rate for UV-A and UV-B, the cotton and silk fabrics dyed with $FeSO_4{\cdot}7H_{2}O$ mordant showed the very high sun protection rate of more than $90\%$.

• Journal of Environmental Impact Assessment
• /
• v.8 no.3
• /
• pp.77-90
• /
• 1999

The degree of green naturality (DGN) has played a key role for maintaining the environmental quality from inappropriate developments, although the quality and effectiveness of the mapping of DGN has been under debate. In this study, spatial distribution of degree of green naturality was initially estimated from forest stand maps that were produced from the aerial photo interpretation and extensive field survey. Once the boundary of initial classes of DGN were defined, it were overlaid with normalized difference vegetation index (NDVI) data that were derived from the recently obtained Landsat Thematic Mapper data. NDVI was calculated for each pixel from the radiometrically corrected satellite image. There were no significant differences in mean values of vegetation index among the initial DGN classes. However, the satellite derived vegetation index was very effective to delineate the developed and damaged forest lands and to adjust the initial value of DGN according to the distribution of NDVI within each class.

• The Journal of Korean Physical Therapy
• /
• v.7 no.1
• /
• pp.43-49
• /
• 1995

The purpose of this study were to determine the effect of testing posture and elbow position on grip strength. Two hundred college students 100 males and 100 females aged 18 to 28 years, participated in the study. A Grip-Strength Dynamometer was used to measure the grip strength in two testing posture(sitting and standin) and four elbow position$(0^{\circ},\;45^{\circ},\;90^{\circ}\;and\;135^{\circ}\;flexion)$ correlations and t-test was used to determine any significant difference in grip strength between the testing posture and the elbow position. The results were as follows : 1. The grip strength was affected by testing pasture and flexion degree of elbow. 2. The grip strength was stronger in the standing than sitting in subjects 3. The grip strength decreased according to elbow flexion increase in subjects. 4. The higher grip strength gained in the standing with the elbow 0 flexion. 5. The grip strength by elbow flexion degree showed significant difference at sitting and standing posture. The grip strength was significant differenced by testing position at same elbow flexion degree.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.41-52
• /
• 2007

The present study analyzed the two hand backhand stroke motion of six female high school tennis players who won the championship at the National Athletic Meeting in 2006, and drew conclusions as follows. The open angle of the racket at the moment of impact was 90 degree without significant difference among the players, making a wide contact between the ball and the racket. The racket angle was 43 degree at take back and 91 at impact, showing a style of holding the racket rather upright in general. In back swing from the top to the impact, the shoulders and the hips turned by 97 degree and 40 degree, respectively. At the moment of impact, the height of the impact was 54%H, and the position of the impact was 10%H ahead of and 37%H left from the central axis of the body. The right hand made a continental grip and the left hand made a Western or semi Western grip. Through the entire swing motion, the grip angle of the left hand was smaller than that of the right hand, and those who maintained a large grip angle of the right hand at the moment of take back put the racket head slightly farther from the body. In the swing of the racket head from the lowest point to the impact, the vertical length of movement was 11%H and the horizontal length of movement was 60%H, quite long.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.139-140
• /
• 2019

In this study, we conducted a comparative analysis of the effects of resuscitation after the re-application of mortar with much FA replacement on the degree of resuscitation. Results When NaOH was applied to the top of the mortar where 90% of FA was replaced, and maintained for 24 hours, the degree of resuscitation at $40^{\circ}C$ was completely improved. However, when medium curing was carried out, it showed a higher degree of compression than water or lapping curing at 10 MPa in 28 days. The degree of resuscitation on the 28th day was revived from around 10% of the normal level to about 20~30%, and it was analyzed that it was difficult to achieve the OPC reduction by any method.

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.335-340
• /
• 2013

Background In patients with medial orbital wall fracture, predicting the correlation between the degree of enophthalmos and the extent of fracture is essential for deciding on surgical treatment. We conducted this retrospective study to identify the correlation between the two parameters. Methods We quantitatively analyzed the correlation between the area of the bone defect and the degree of enophthalmos on computed tomography scans in 81 patients with medial orbital wall fracture who had been left untreated for more than six months. Results There was a significant linear positive correlation between the area of the medial orbital wall fracture and the degree of enophthalmos with a formula of E=0.705A+0.061 (E, the degree of enophthalmos; A, the area of bone defect) (Pearson's correlation coefficient, 0.812) (P<0.05). In addition, that there were no cases in which the degree of enophthalmos was greater than 2 mm when the area of the medial orbital wall fracture was smaller than $1.90cm^2$. Conclusions Our results indicate not only that 2 mm of enophthalmos corresponds to a bone defect area of approximately $2.75cm^2$ in patients with medial orbital wall fracture but also that the degree of enophthalmos could be quantitatively predicted based on the area of the bone defect even more than six months after trauma.