• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.5
• /
• pp.648-656
• /
• 2003

An experimental research was performed to study turbulent flow characteristic in a $90^{\circ}$ circular bend by using the PIV(Particle Image Velocimetry) method, this study found the time-mean velocity distribution, time-mean turbulent intensity with turbulent flow for Re = 10,000, 15,000, 20,000, and 25,000 along the test bend. It was found that the highest streamwise velocity of turbulent flow occurs near y/D = 0.5 and the flow moved to y/D =0.15. The peak turbulence intensity shifted toward the concave wall from $\theta= 45 and as \theta$ increased. the intensity decayed along the test tube.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1851-1854
• /
• 2003

This paper suggests an algorithm which can retrieval images using correlations between the region classification of spatial image and the wavelet transform even though the images are rotated in a ${\pm}$90 degree arc. Owing to this proposed method, it was confirmed from experiments that the search about the whole image is not processed and only a few amount of informations are saved by using the mathematical statistics from the block map and transformed band which is resulted from region classification, and by performing the image search based on these, the improvement of search speed and the efficient search can be done.

• Preventive Nutrition and Food Science
• /
• v.3 no.3
• /
• pp.234-240
• /
• 1998

This study attempted to determine the effect of various thawing methods and storage periods on the quality of froen cooked rice. Frozen cooked rice was thawed at four different methods, such as pressure cooking, conventional cooking, microwave heating and thawing at room temperature after 10 days, 30days and 90 days frozen storage. We conducted a physico-chemical analysis (moisture content, dehydration rates, degree of gelatinization, color value and texture) and sensory evalution on the frozen-thawed cooked rice. The study showed that there were no significant differences on the quality characteristics of frozen-thawed cooked rice during the storage period of 90 days. However, the thawing method of pressure cooking caused high moisture content, rapid dehydration rates, and a high degree of gelatinization on the cooked rice. Thus, the desirabililty for the rice diminished becaused of the excess moisture content and the change of appearance and testure in the rice due to the high temperature. There were similiar quality characteristics to the cooked rice after forzen-thawing whether by conventional cooking or by microwave heating and just after cooking. Thawing at room temperature also caused a significant decrease in quality characteristics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.9
• /
• pp.761-770
• /
• 2007

In this study, a swirl generator using delta wing was developed in order to simulate total pressure distortion and flow angle distortion. The delta wing was used for $65^{\circ}$-degree sweep back angle to satisfy the design performance for vortex core position, total pressure distortion(DC90) and swirl angle. To extend the swirling flow area, a $45^{\circ}$-degree vortex flap have applied to the delta wing. The swirl generator satisfied the design requirement of distortion coefficient in the flow distortion test to be applied to the simulation duct, and the performances of distortion for vortex core position and swirl angle using CFD(computational fluid dynamics) analysis results that was verified by flow distortion test results.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.309-312
• /
• 2004

Two-dimensionally arrayed nanocolumn lattices were fabricated by using double-exposure laser holographic method. The hexagonal lattice was formed by rotating the sample with 60 degree while the square lattice by 90 degree before the second laser-exposure. The size and period of nanocolumns could be controlled accurately from 125 to 145 nm in diameter and 220 to 290 nm in period for square lattice by changing the incident angle of laser beam. The reactive ion etching for a typical time of 30 min using CH$_4$/H$_2$ plasma enhanced the aspect-ratio by more than 1.5 with a slight increase of the bottom width of columns.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.328-333
• /
• 2015

The museum is a important place to inform the value of various antiquities and relics. The museum, founded in domestic, were increased 90% in 2013 compared to 2006, and total number of including private museums were increased more than three times over the past decade. There are installing a variety of illumination and air-conditioning system, such as the spot lighting of exhibition explanation. But the exhibition explanation should not happen to visual perception disabilities by lighting. According to ICOM (International Council of Museum), it is stipulating that the museum should not to occur glare. However, we confirmed some occurred the glare and it was lack of previous studies about prevention plan. In this study, we verified occurrence of the glare by illumination angles and visitor's eye-level. The luminance values were determined by using DSLR camera and illuminometer. As a result, when illumination angle is 90 degree, the glare did not occurred by the luminance value ratio of over 0.167 regardless of eye-level. By contrast, the angle 30 degree was appeared glare with all level. And this study was compared luminance values that obtained through experiment and surveying.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.55-61
• /
• 2005

The purpose of this study is to investigate the effect of circumferential location of local wall thinning defect on the collapse behavior of an elbow. Thus, the present study conducts three-dimensional finite element analysis on the 90-degree elbow containing a local wall thinning at intrados, crown and extrados of bend region and evaluates the collapse moment of wall thinned elbow under various thinning shapes and loading conditions. Combined internal pressure and bending moment are considered as an applied load. The internal pressure of $0\~20MPa$ and both closing and opening mode bending are employed. The results of analysis show that the reduction in collapse moment of the elbow by local wall thinning is more significant for a defect locating at crown than for a defect locating at intrados or at extrados. Also, the effect of internal pressure on the collapse moment of wall thinned elbow depends on the circumferential location of thinning defect and applied bending mode.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.3
• /
• pp.190-194
• /
• 1993

This experiment was conducted to investigate the effects of concentrated sulfate on the germination rate, growth rate and the productivity of weight of kudzu (Pueraria thwnbergiana Bentham). The germination rate of kudzu seed by one or two treatment retreatment with the concentrated sulfate for minutes of 5. 10, 15 and 20 were determined respectively. The results obtained were summarized as follows; 1. In the time of concentrated sulfate treatment, the germination rate was the highest in the once treatment for 20 minute. and the retreatment was higher than the once treatment in the germination rate. 2. The changes of plant length by growth stage was grown gradually until for 60 day and rapidly after for 60 day. The growth rate was the highest in treatment for 15 minute than in other treatments. 3. The stem diameter. stem weight. fresh weight and root weight by the treatment with sulfate 15 minute as the treatment with once were high degree of productivity. 4. The number of branch. number of nodes and root weight by the growth stage were higher growth rate before for 90 day than after for 90 day, however stem weight and fresh weight were high degree of productivity after for 60 day.

• Journal of Adhesion and Interface
• /
• v.3 no.1
• /
• pp.13-19
• /
• 2002

We have studied on the surface and adhesion properties for acrylic terpolymers, having both hydrophobic and hydrophilic side chains, synthesized via solution polymerization. In order to develop a waterborne material. we tried to synthesize these terpolymers via emulsion polymerization. The polymeric emulsion synthesized was mainly composed of methyl methacrylate (MMA), methoxy-polyethyleneglycol methacrylate (MPEGMA) having hydrophilic side chains and methoxypolypropyleneglycol methacrylate (MPEGMA) having hydrophobic side chains. The viscosities of this series increased with an increase in the content of the co-monomer such as MPEGMA and (MPEGMA). This behavior resulted in the increase in the diameter and heterogeneity of the emulsion particle via AFM observation. Furthermore. the tensile adhesion strength and 90-degree peel strength of the adhesive of these polymeric emulsions were measured. In the case of polymeric emulsion composed of the same content of both hydrophilic and hydrophobic component, the adhesion property showed the highest value. However, since the adhesion properties as a practical applicable adhesive were poor, some improvements were required. When the composition above was modified with butyl acrylate (BA), the improvement effect on adhesion strength was accepted. In particular, 90-degree peel strength increased up to a maximum of 400% of the original value.

• Convergence Security Journal
• /
• v.13 no.4
• /
• pp.27-32
• /
• 2013

In this paper, technologies applied to design urination detection device on diaper that issues an alarm signal to guardian within 10~20m are introduced. It features power saving that uses both low power bluetooth v4.0 chip and low-power program scheme that makes sensor and mirco-controller to be sleep mode while data is not receiving from sensor. Urination detection algorithm that utilizes the difference between previous sensing data and current values is used to improve the degree of the detection precision level. The device designed with the suggested technologies shows the performance that is 100ml of the minimum urine amount for detection, more than 90% of urination detection degree, and 100% of wireless communication success rate.