• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.284-287
• /
• 2000

We analyzed the 3-dimensional discharge characteristic in plasma display panel(PDP) cell using the 3-dimensional emission distribution of 828nm light measured by scanned point detecting method(SPDM). The emitted light distributions on the ITO electrode show the stronger light intensity near to the electrode gap than outside. Also, 828nm light is widely detected outside of the bus electrode. We consider that measurement using new SPDM is effective to analyze the discharge physics and propose the new panel structures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.233-233
• /
• 1999

본 연구에서는 2성분계 gas(Ne+Xe)를 사용하여 기체압력(p), 진동수(f)에 따라 VUV(Vacuum Ultra Violet) spectrum 147, 173nm 파장과 IR(Infrared) spectrum 823nm, 828nm을 Vacuum Monochromator(Acton-VM 507)를 통해 측정하였다. 휘도(Luminance)와 전력(Power)측면에서 Ne+ Xe 최적의 가스 조성비를 찾기 위해서 Xe의 혼합비에 따른 IR영역인 823nm, 828nm을 측정결과, Xe 4%일 때 좋은 효율을 나타냈다. 기체압력이 200Torr에서는 Xe(3P1)에 기인하는 147nm가 주요한 파장이며, 기체압력이 400Torr, 600Torr일때는 Xe(3P2)에 기인하는 173nm 파장이 주요함을 알 수 있었다. 또한 공간 방전 이미지를 전압 pulse 인가후 ICCD Camera(V-Tek)의 Ready time, On Time을 조절하면서 50ns delay로 관측하였다. 향후 실험계획은 실제 상용화되고 있는 혼합가스 He+Ne+Xe의 조성비에 따른 자세한 실험을 할 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.415-415
• /
• 2010

면방전 구조의 AC-PDP는 페닝 혼합 기체 중에서 Xe 플라스마에서 발생되는 VUV (Vacuum Ultra Violet) 에 의해 들뜬 형광체로부터 가시광이 발생된다. Xe 여기종은 828 nm의 공명준위를 거쳐 147 nm의 진공자외선을 방출하며 823 nm의 준안정준위에서 분자선을 거쳐 173 nm의 진공 자외선을 낸다. 이러한 Xe 여기종의 밀도를 측정하기 위해서는 828 nm와 823 nm의 레이저를 외부에서 인위적으로 조사하여 측정하면 IR (Infrared)의 흡수전과 흡수후의 빛의 세기로 Xe 여기종의 밀도 및 분포를 계산할 수 있다. 본 실험에서는 823 nm에 초점을 두었으며 LAS (Laser Absorption Spectroscopy) 기법을 통하여 He-Ne-Xe(15%, 20 %, 30%) 400Torr의 3종 기체의 Xe 함량에 따른 시공간의 Xe($1s_5$) 여기종 밀도 분포와 방전효율을 관측하였다. 최근 3전극 면방전형 AC-PDP 효율 향상을 위해 3종 기체의 Xe함량비의 방전기체에 대한 연구가 수행되고 있다. 이러한 기초 데이터는 혼합기체 조건에 따른 면방전 구조의 3전극 AC-PDP의 발광 효율을 개선하는 데 유용한 자료로 활용될 것이다.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.220-222
• /
• 2005

We can classify two cases in a way to observe an atom of gas state or a molecule using the laser. First case is way to use dispersion phenomenon like Rayleigh scattering, Thomson scattering, Mie scattering, Raman Scattering. And Second case is a way to use change phenomenon like a LAS (Laser Absorption Spectroscopy), LIF (Laser Induced Fluorescent). In this paper, we have measured the meta-stable density and the distribution by using a LAS method in Xe discharge lamp. The laser absorption spectroscopy (LAS) is useful to investigate the behavior of such species. The xenon atoms in the $1S_4$ and $1S_5$ generate excited $Xe^*$(147nm) and $Xe_{2}^*$(173nm) dimers in Xe plasma. It is found that the intensity of VUV 147nm emission is proportional to that of the IR 828nm emission, and the VUV 173nm emission is roughly proportional to that of the IR 823nm emission. The laser is used CW laser that consist of AlGaAs semiconductor and energy level is used 823.16nm wavelength. We measured signal of monochrometer from the lamp center while will change a discharge electric current by 6mA in 3mA and calculated meta-stable state density of a xenon atom through a measured value.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.825-828
• /
• 2008

$Sr_xBa_{(1-x)}TiO_3$ red phosphors doped with Pr(0.13 mol%) and Al(O.23 mol%) were synthesized by solid state reaction method. Orthorhombic perovskite structure with increasing value of x in $Sr_xBa_{(1-x)}TiO_3$:Pr,Al phosphors changed to cubic perovskite structure. Emission bands at 615 nm and 492 nm in $Sr_{0.25}Ba_{0.75}TiO_3$:Pr,Al and $BaTiO_3$:Pr,Al phosphors were observed at room temperature. The main cause of green luminescence at 492 nm was explained by the change of the 4f5d band.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.828-831
• /
• 1999

5,15-Bis(mesityl)-10,20-bis(4-amino)porphyrin was synthesized with meso-(mesityl)dipyrromethane and 4-nitrobenzaldehyde. It was characterized with $^1H$-NMR spectroscopy, UV spectrophotometer, and GC-MASS. In UV spectrum, Soret-band(438 nm) and Q-bands(526, 572, 611 nm) were confirmed. In NMR spectrum, the characteristic peak of porphyrin was detected at -2.65 ppm. Copolyimide containing porphyrin structure was synthesized with mesityl-$TPP(NH_2)$, 3,3',4,4'-benzophenonetetracarboxylic dianhydride(BTDA) and 2,2-bis(4-(4-aminophenoxy)phenyl) hexafluoropropane(BAPHF) and characterized with UV and FT-IR spectrophotometer. The $T_g$ and $T_m$ of the synthesized copolyimide were 220.7 and $369.2^{\circ}C$, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.743-747
• /
• 2003

The improvement of luminance and luminous efficiency is the one of the most important part in AC-PDPs. To achieve high luminance and luminous efficiency, high VUV emission efficiency is needed. We measured the emission spectra of vacuum ultraviolet(VUV) and infrared(IR) rays in surface discharge AC-PDP with Ne-Xe mixture gas. The influence of Ne-Xe gas-mixture ratio on resonance state $Xe^{\ast}(3P_{1})$ and exited state $Xe^{\ast}(3P_{2})$ has been investigated. It is found that the intensity of VUV 147nm emission is proportional to that of the IR 828 nm emission, and the VUV 173nm emission is roughly proportional to that of the IR 823nm emission. The electron temperature and plasma density have been experimentally measured from the center of sustaining electrode gap by a micro Langmuir probe in AC-PDPs. The plasma density from the center of sustaining electrode gap are shown to be maximum value of $9{\times}10^{11}cm^{-3}$, where the electron temperature is about 1.6 eV in this experiment

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.825-828
• /
• 2009

고형원료인 폐기물의 감량화 및 자원화 기술 중 가장 대표적인 기술로 폐기물의 소각(incineration)기술과 가스화(gasification)용융기술을 들 수 있다. 폐기물 가스화 기술은 폐기물 내의 탄소, 수소 성분을 가스화하여 CO, $H_2$가 주성분인 합성가스(synthesis gas, syngas)로 전환하여 불연물은 용융되어 환경적으로 무해한 슬래그로 회수하는 기술이다. 폐기물 가스화 용융 시스템으로 발생된 합성가스를 재순환하여 사용하는 합성가스 재순환시스템을 통해 가스화에 필요한 열을 시스템 내에서 대체하여 사용하는 기술개발은 폐기물 가스화 용융기술의 경제성을 높일 수 있다. 본 연구에서는 고형 폐기물 가스화반응에 의해 발생되는 합성가스를 재순환하여 폐기물 가스화 용융 시스템내의 자체 에너지원으로 활용할 수 있도록 하는 합성가스 재순환 시스템 및 버너의 운전특성을 고찰하였다. 합성가스의 재순환 장치에서의 운전 압력 제어 및 유량제어를 통해서 안정적인 합성가스 재순환 성능과 재순환버너의 연소 성능을 유지할 수 있었다. 합성가스 재순환버너에 의한 16,800 $kcal/Nm^3$ 조건 및 33,600 $kcal/Nm^3$ 조건에서 운전시에도 가스화기의 운전온도는 안정적으로 유지됨에 따라 생산된 합성가스의 가스화기 보조연료 대체 및 에너지절감이 가능한 것으로 판단된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8A
• /
• pp.821-828
• /
• 2008

In this paper, we present an optimized design of RS(23,17) decoder for UWB, which uses the pipeline structured-modified Euclidean(PS-ME) algorithm. Firstly, the modified processing element(PE) block is presented in order to get rid of degree comparison circuits, registers and MUX at the final PE stage. Also, a degree computationless decoding algorithm is proposed, so that the hardware complexity of the decoder can be reduced and high-speed decoder can be implemented. Additionally, we optimize Chien search algorithm, Forney algorithm, and FIFO size for UWB specification. Using Verilog HDL, the proposed decoder is implemented and synthesized with Samsung 65nm library. From synthesis results, it can operate at clock frequency of 250MHz, and gate count is 17,628.

• Animal Bioscience
• /
• v.36 no.5
• /
• pp.818-828
• /
• 2023

Objective: The purpose of this study was to analyze the effect of the hydrothermal pretreatment of anaerobic digestion sludge cake (ADSC) of cattle manure on the solubilization of organic matter and the methane yield to improve the anaerobic digestion efficiency of cattle manure collected from the sawdust pens of cattle. Methods: Anaerobic digestion sludge cake of cattle manure was thermally pretreated at 160℃, 180℃, 200℃, and 220℃ by a hydrothermal pressure reactor, and the biochemical methane potential of ADSC hydrolysate was analyzed. Methane yield recovered by the hydrothermal pretreatment of ADCS was estimated based on mass balance. Results: The chemical oxygen demand solubilization degree (COD_s) of the hydrothermal hydrolysate increased to 63.56%, 67.13%, 70.07%, and 66.14% at the hydrothermal reaction temperatures of 160℃, 180℃, 200℃, and 220℃, respectively. Considering the volatile solids content obtained after the hydrothermal pretreatment, the methane of 10.2 Nm³/ton-ADSC was recovered from ADSC of 1.0 ton, and methane yields of ADSC hydrolysate increased to 15.6, 18.0, 17.4, and 17.2 Nm³/ton-ADSC. Conclusion: Therefore, the optimal hydrothermal reaction temperature that yielded the maximum methane yield was 180℃ based on mass balance, and the methane yield from cattle manure containing sawdust was improved by the hydrothermal pretreatment of ADSC.