• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.293-299
• /
• 2016

Recently, as IoT (Internet of Things) becomes more important, low cost implementation of sensor nodes also becomes critical issues for two well-known standards, IEEE 802.15.4 and IEEE 802.15.6 which stands for WPAN (Wireless Personal Area Network) and WBAN (Wireless Body Area Network), respectively. This paper presents the area-optimized AES-CCM (Advanced Encryption Standard - Counter with CBC-MAC) hardware security engine which can support both IEEE 802.15.4 and IEEE 802.15.6 standards. First, for the low cost design, we propose the 8-bit AES encryption core with the S-box that consists of fully combinational logic based on composite field arithmetic. We also exploit the toggle method to reduce the complexity of design further by reusing the AES core for performing two operation mode of AES-CCM. The implementation results show that the total gate count of proposed AES-CCM security engine can be reduced by up to 42.5% compared to the conventional design.

• Journal of Internet Computing and Services
• /
• v.10 no.4
• /
• pp.213-222
• /
• 2009

IEEE 802.15.3 HR-WPAN is designed to enable wireless connectivity of high-speed, low-power, low-cost multimedia-capable portable consumer electronic devices. For quality of service, the standard specifies the use of TDMA (Time Division Multiple Access). However, during low contention TDMA gives much lower channel utilization and higher delays than CSMA (Carrier Sensing Multiple Access) because in TDMA, a node can transmit only during its scheduled time slots whereas in CSMA, nodes can transmit at any time as long as there is no contention. By mixing CSMA and TDMA, Hybrid MAC becomes more robust to timing failures, time-varying channel conditions, slot assignment failures and topology changes than a stand-alone TDMA.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.322-325
• /
• 2016

This paper proposed Enhanced Segmentized Clear Channel Assesment(ESCCA) for the IEEE 802.15.4 networks. This method divides original CCA into two groups to check precise channel status and perform additional CCA to increase throughput performance. Through the proposed method, the device can access the channel more often, so the transmission efficiency of the IEEE 802.15.4 network improves. To confirm the feasibility and usability of the proposed method, computer simulation has been performed. In the simulation, a star topology with one coordinator and a lot of devices is considered and the traffic flows are all one way, with the communication directed to the coordinator. Simulation results_ show the proposed method is improving maximum 10 kbps of throughput and decreasing maximum 15 of the average number of total CCA than IEEE 802.15.4 CCA method.

• Journal of Communications and Networks
• /
• v.10 no.3
• /
• pp.301-307
• /
• 2008

In this paper, the impact of channel sensing methods to IEEE 802.15.4 under the interference of IEEE 802.11b are analyzed. Two different channel sensing methods, energy detection and carrier sense, are considered. An average transmission delay, a throughput, and a power drain rate are used as performance measures. Those performance measures of IEEE 802.15.4 under the interference of IEEE 802.11b are analyzed mathematically. The simulation results are shown to validate the analytic results.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.393-406
• /
• 2009

This paper introduces two functions added to the current version of ns-2 simulator for better accuracy of IEEE 802.15.4 network simulations. The first one is to automatically place hidden nodes over the ring topology in which the coordinator is centered, when the number of hidden nodes and total number of nodes is given. Collisions of signals can be distinguished into the trace file according to the ways of participation of hidden nodes. The second one is the CCA deferment algorithm described in IEEE 802.15.4-2006 standard which is not implemented in the current version of ns-2. Owing to these additional functions, we can carry out the precise analysis of the performance effects of hidden nodes and CCA deferment algorithm on 802.15.4 networks. Simulation results present at least 66% of performance degradation in throughput and drastic increase of collision probability up to 90% from 65% by just a single hidden node. Besides, 2006 standard for CCA deferment algorithm gives 19% lower collision probability and 38% higher performance.

• Journal of the Korea Society for Simulation
• /
• v.14 no.3
• /
• pp.101-108
• /
• 2005

IEEE 802.15.4 low-rate Wireless Personal Area Networks (WPAN) are expected to provide ubiquitous networking between small personal/home devices and sensors with low power consumption and low cost features. The technology employs special CSMA/CA (Carrier Sense Multiple Access/collision Avoidance) to save power consumption for small or portable WPAN-enabled devices. In this paper, we simulation the slotted CSMA/CA of IEEE 802.15.4 MAC and evaluate its performance limit in order to grasp the characteristics of Medium Access Control (MAC) of IEEE 802.15.4 WPAN.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.1-11
• /
• 2015

WBAN(Wireless Body Area Network) operating around the human body aims at medical and non-medical service at the same time. and it is the short-range communication technology requiring low-power, various data rate and high reliability. Various studies is performing for IEEE 802.15.4, because IEEE 802.15.4 can provide high compatibility for operate WBAN among communication standard satisfiable these requirements. Meanwhile, in the case of coexisting many IEEE 802.15.4-based WBAN, signal interference and collision are the main cause that is decreasing data reliability. but IEEE 802.15.4 Standard does not consider about coexistence of many networks. so it needs improvement. In this paper, To solve about this problem, identify coexistence problem of IEEE 802.15.4-based WBAN by preliminary experiments. and propose a scheme to mitigate the reliability decrease at multiple coexistence WBAN. The proposed scheme can be classified in two steps. The first step is avoidance to collision on the CFP through improving data transmission. The second step is mitigation collision through converting channel access method. Proposed scheme is verified the performance by performing comparison experiment with Standard-based WBAN.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.3
• /
• pp.318-325
• /
• 2008

In this paper, a dynamic backoff adjustment method of IEEE 802.15.4 is proposed for time-critical sporadic data in a noisy factory environment. For this, a superframe of IEEE 802.15.4 is applied to a real-time mixed data (periodic data, sporadic data, and non real-time message) transmission in factory communication systems. To guarantee a channel access of real-time sporadic(non-periodic) data, a transmission method using the dynamic backoff is applied to wireless control networks. For the real-time property, different initial BE, CW parameters are used for the dynamic backoff adjustment method. The simulat-ion results show an enhancement of the real-time performance of sporadic emergency data. The proposed method provides the channel access of real-time sporadic data efficiently, and guarantee real-time transmission simultaneously within a limite-d timeframe.

• Information and Communications Magazine
• /
• v.32 no.3
• /
• pp.85-93
• /
• 2015

최근 사물 인터넷(IoT: Internet of Things)이 대두되고 있다. 사물 인터넷이 발달하게 되면 각종 사물에 통신 칩이 내장되어 인터넷에 연결되거나 자체 네트워크를 이루어 인류 삶에 다양한 경험을 제공하게 된다. IEEE 802.15 WPAN(Wireless Personal Area Networks)은 주로 근거리에서 다양한 서비스를 제공하는 무선 통신 표준으로 사물 인터넷에 적용될 수 있는 네트워킹 기술이다[1]. IEEE 802.15 표준의 주요 기술은 저전력으로 동작하는 저가의 소형 통신 칩으로 구현이 가능하기 때문에 각종 사물에 내장되어 오랫동안 동작할 수 있다. 또한 단말과 기지국, 단말과 단말의 연결 등 다양한 토폴로지를 지원하고, 각종 서비스에 필요한 다양한 전송 속도를 지원할 수 있다. 본고에서는 IEEE 802.15 표준이 제공하는 서비스와 이를 제공하기 위한 주요 기술을 소개하고, 최근 표준화 진행 과정을 알아본다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.3
• /
• pp.1-11
• /
• 2018

This paper explores the reliability issue especially associated with the time-division synchronous communication when a networking stack is implemented using software timers provided by embedded operating systems. Especially, we explore the reliability of beacon synchronization of IEEE 802.15.4. Our experiments based on its practical implementation clearly show that processing delays or losses of hardware timer interrupts used for software timers lead to occasional failures in beacon synchronization. To avoid such failures, we suggest a reception time compensation scheme that turns on the receiver earlier than expected.