• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.270-286
• /
• 2012

In this paper, we propose a novel routing protocol called the Cartography Enhanced OLSR (CE-OLSR) for multi hop mobile ad hoc networks (multi hop MANETs). CE-OLSR is based on an efficient cartography gathering scheme and a stability routing approach. The cartography gathering scheme is non intrusive and uses the exact OLSR reduced signaling traffic, but in a more elegant and efficient way to improve responsiveness to the network dynamics. This cartography is a much richer and accurate view than the mere network topology gathered and used by OLSR. The stability routing approach uses a reduced view of the collected cartography that only includes links not exceeding a certain distance threshold and do not cross obstacles. In urban environments, IEEE 802.11 radio signals undergo severe radio shadowing and fading effects and may be completely obstructed by obstacles such as buildings. Extensive simulations are conducted to study the performances of CE-OLSR and compare them with those of OLSR. We show that CE-OLSR greatly outperforms OLSR in delivering a high percentage of route validity, a much higher throughput and a much lower average delay. In particular the extremely low average delay exacerbated by CE-OLSR makes it a viable candidate for the transport of real time data traffic in multi hop MANETs.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.534-537
• /
• 2013

A compact monopole antenna excited by a conductor-backed coplanar waveguide (CBCPW) is developed for wireless USB dongle applications. The proposed antenna has a compact dimension of $14mm{\times}47.4mm{\times}3.5mm$, which is suitable for a USB dongle housing. A slotted elliptical patch and a CBCPW with vertical vias are employed to achieve a further size reduction and an improved impedance bandwidth. The measurement result demonstrates that the fabricated antenna resonates from 2.25 GHz to 10.9 GHz, which covers all of the important wireless communication bands, including WiBro (2.3 GHz to 2.4 GHz), Bluetooth (2.4 GHz to 2.484 GHz), WiMAX (2.5 GHz to 2.7 GHz and 3.4 GHz to 3.6 GHz), satellite DMB (2.605 GHz to 2.655 GHz), 802.11b/g/a WLAN (2.4 GHz to 2.485 GHz and 5.15 GHz to 5.825 GHz), and ultra-wideband (3.1 GHz to 10.6 GHz) services. The radiation characteristics of the proposed antenna when attached to a laptop are tested to investigate the influence of the keypad and the LCD panel of the laptop.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.883-887
• /
• 2011

Location-based service (LBS) is becoming an important part of the information technology (IT) business. Localization is a core technology for LBS because LBS is based on the position of each device or user. In case of outdoor, GPS - which is used to determine the position of a moving user - is the dominant technology. As satellite signal cannot reach indoor, GPS cannot be used in indoor environment. Therefore, research and study about indoor localization technology, which has the same accuracy as an outdoor GPS, is needed for "seamless LBS". For indoor localization, we consider the IEEE802.11 WLAN environment. Generally, received signal strength indicator (RSSI) is used to obtain a specific position of the user under the WLAN environment. RSSI has a characteristic that is decreased over distance. To use RSSI at indoor localization, a mathematical model of RSSI, which reflects its characteristic, is used. However, this RSSI of the mathematical model is different from a real RSSI, which, in reality, has a sensitive parameter that is much affected by the propagation environment. This difference causes the occurrence of localization error. Thus, it is necessary to set a proper RSSI model in order to obtain an accurate localization result. We propose a method in which the parameters of the propagation environment are determined using only RSSI measurements obtained during localization.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.326-334
• /
• 2011

This paper outlines the time jitter effect of a sampling clock on a software-defined radio technology-based digital intermediate frequency (IF) transceiver for a mobile communication base station. The implemented digital IF transceiver is reconfigurable to high-speed data packet access (HSDPA) and three bandwidth profiles: 1.75 MHz, 3.5 MHz, and 7 MHz, each incorporating the IEEE 802.16d worldwide interoperability for microwave access (WiMAX) standard. This paper examines the relationship between the signal-to-noise ratio (SNR) characteristics of a digital IF transceiver with an under-sampling scheme and the sampling jitter effect on a multichannel orthogonal frequency-division multiplexing (OFDM) signal. The simulation and experimental results show that the SNR of the OFDM system with narrower band profiles is more susceptible to sampling clock jitter than systems with relatively wider band profiles. Further, for systems with a comparable bandwidth, HSDPA outperforms WiMAX, for example, a 5 dB error vector magnitude improvement at 15 picoseconds time jitter for a bandwidth of WiMAX 3.5 MHz profile.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.1
• /
• pp.119-133
• /
• 2009

The purpose of this research is to accurately estimate the location of a device using the received signal strength indicator (RSSI) of IEEE 802.11 WLAN for location tracking in indoor environments. For the location estimation method, we adopted the calibration model. By applying the Adaptive Zone Based K-NNSS (AZ-NNSS) algorithm, which considers the velocity of devices, this paper presents a 9% improvement of accuracy compared to the existing K-NNSS-based research, with 37% of the K-NNSS computation load. The accuracy is further enhanced by using a Kalman filter; the improvement was about 24%. This research also shows the level of accuracy that can be achieved by replacing a subset of the calibration data with values computed by a numerical equation, and suggests a reasonable number of calibration points. In addition, we use both the mean error distance (MED) and hit ratio to evaluate the accuracy of location estimation, while avoiding a biased comparison.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.352-361
• /
• 2013

Combining multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) with a massive number of transmit antennas (massive MIMO-OFDM) is an attractive way of increasing the spectrum efficiency or reducing the transmission energy per bit. The effectiveness of Massive MIMO-OFDM is strongly affected by the channel state information (CSI) estimation method used. The overheads of training frame transmission and CSI feedback decrease multiple access channel (MAC) efficiency and increase the CSI estimation cost at a user station (STA). This paper proposes a CSI estimation scheme that reduces the training frame length by using a novel pilot design and a novel unitary matrix feedback method. The proposed pilot design and unitary matrix feedback enable the access point (AP) to estimate the CSI of the signal space of all transmit antennas using a small number of training frames. Simulations in an IEEE 802.11n channel verify the attractive transmission performance of the proposed methods.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.844-847
• /
• 2011

Wireless mesh network (WMN) is a type of mobile ad-hoc network consists of wireless router, mobile clients and gateway which connects the network with the Internet. To provide security in the network it is required to encrypt the message sent among the communicating nodes in such way so that only legitimate user can retrieve the original data. Several security mechanisms have been proposed so far to enhance the security of WMN. However, there still exists a need for a comprehensive mechanism to prevent attacks in data communication. Considering the characteristic of mesh network, in this paper we proposed a public key cryptography based security architecture to establish a secure key agreement among communicating nodes in mesh network. The proposed security architecture consists of two major sections: client data protection and network data protection. Client data protection deals with the mutual authentication between the client and the access router and provide client to access router encryption for data confidentiality using standard IEEE 802.11i protocol. On the other hand, network data protection ensures encrypted routing and data transfer in the multi hop backbone network. For the network data protection, we used the pre-distributed public key to form a secure backbone infrastructure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.119-124
• /
• 2010

The MAC layer in ad-hoc network which makes network of nodes without infrastructure for a time has became an issue to reduce delay, allocate fairly bandwidth, control TX/RX power and improve throughput. Specially, the problem to reduce power consumption in ad-hoc network is very important part as ad-hoc devices use the limited battery. For solution of the problem, many power control algorithms, such as distribute power control, PCM (Power Control MAC) and F-PCF (Fragmentation based PCM), are proposed to limit power consumption until now. Although the algorithms are designed to minimize power consumption, the latency communication zone is generated by power control of RX/TX nodes. However the algorithms don't suitably reuse the space. In this paper proposes the algorithm to improve data throughput through Spatial Reuse based on a power control method.

• Journal of Clinical Nutrition
• /
• v.10 no.2
• /
• pp.51-55
• /
• 2018

Purpose: This study was conducted to assess how extreme obesity affects 30-day mortality in this patient group. Methods: A total of 802 patients who underwent emergency gastrointestinal surgery from January 2007 to December 2017 were retrospectively reviewed. Patients were divided into three groups according to their body mass index (BMI): group 1, normal weight (BMI: $18.5{\sim}22.9kg/m^2$); group 2, overweight (BMI: $23.0{\sim}29.9kg/m^2$ ); and group 3, obesity ($BMI{\geq}30kg/m^2$). Patients with a BMI under 18.5 were excluded from the analysis. Chi-squared test, Fisher's exact test, Kaplan-Meier survival analysis, and the log-rank test were used to assess and compare 30-day mortality rates between groups. Results: The mortality rates of group 1, group 2, and group 3 were 11.3%, 9.0%, and 26.9%, respectively (P<0.017). The mortality rate did not differ significantly between group 1 and 2 (11.3% vs. 9.0%; P=0.341), but group 1 and 2 showed better survival rates than group 3 (11.3% vs. 26.9%; P=0.028, 9.0% vs. 26.9%; P=0.011). Kaplan-Meier survival analysis revealed that group 3 had higher mortality than the other two groups (P=0.001). Conclusion: Obesity ($BMI{\geq}30kg/m^2$) was one of the risk factors influencing critically ill patients who underwent emergency surgery.

• Archives of Plastic Surgery
• /
• v.34 no.6
• /
• pp.799-802
• /
• 2007

Purpose: The masserteric space is an important tissue compartment of the face, but a disease in it is difficult to diagnose and treat. The submasseteric abscess is located between the masseter muscle and mandibular ramus with different appearances such as sepsis, infection, or tumor. Especially the common misdiagnosis of submasseteric abscess is acute or chronic parotitis. The purpose of this report is to pay special attention to the possible diagnosis of submasseteric abscess for the symptoms of unilateral cheek swelling and tenderness that accompany marked trismus. Methods: A 11-year-old boy came to our hospital because of facial swelling, tenderness, and trismus in a history of left cheek swelling and toothache. We diagnosed his case as submasseteric abscess by CT scan and surgical intervention was performed. Under general anesthesia, the abscess was opened by the intraoral incision and considerably massive pus was drained. Results: Swelling, tenderness, and trismus became to subside during postoperative 10 days and general condition and vital signs became stable. After 6 months, CT scan showed that both masseteric muscles were symmetric and there was no periosteal reaction of the mandible. Conclusion: In conclusion, submasseteric abscess is a rare infection with the symptoms of cheek tenderness and marked trismus. A detailed medical history and clinical examination of a patient as well as computed tomography(CT) are important tools in the accurate diagnosis and efficient treatment of the submasseteric abscess. Adequate drainage, removal of cause, and antibiotic infusion are the management of choice.