• Geomechanics and Engineering
• /
• v.31 no.4
• /
• pp.409-422
• /
• 2022

The use of calcium sulfoaluminate (CSA) cement as a rapid-hardening cement admixture or eco-friendly alternate for ordinary Portland cement (OPC) has been attempted over the years, but the cost of CSA cement and availability of suitable aluminium resource prevent its wide practical application. To propose an effective ground improvement design in sandy soil, this study aims at blending a certain percentage of CSA with OPC to find an optimum blend that would have fast-setting behavior with a lower carbon footprint than OPC without compromising the mechanical properties of the cemented sand. Compared to the 100% CSA case, initial speed of strength development of blended cement is relatively low as it is mixed with OPC. It is found that 80% OPC and 20% CSA blend has low initial strength but eventually produces equivalent ultimate strength (28 days curing) to that of CSA treated sand. The specific OPC-CSA blend (80:20) exhibits significantly higher strength gain than using pure OPC, thus allowing effective geotechnical designs for sustainable and controlled ground improvement. Further parametric studies were conducted for the blended cement under various curing conditions, cement contents, and curing times. Wet-cured cement treated sand had 33% lower strength than that of dry-cured samples, while the stiffness of wet-cured samples was 25% lower than that of dry-cured samples.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.3
• /
• pp.9-18
• /
• 1993

Sugar spheres loaded with melatonin (MT) were coated with $Aquacoat^{\circledR}$ to control the release rate of MT over 8 hours. A zero-order release pattern over 8 hours was obtained with 20% coating on 8-10 mesh beads in USP basket dissolution studies. MT in 20% coated beads was quite stable at room temperature with less than 5% MT degraded during 6 months' storage. Dissolution profiles were also unchanged after 6 months. An oral preparation containing MT-loaded uncoated beads for immediate release and 20% coated beads with $Aquacoat^{\circledR}$ for controlled release over 8 hours was evaluated in six human subjects. When total 0.5 mg MT as low dose (immediate release portion of MT, 0.1 mg) was administered to four subjects, average peak plasma MT concentration was reached at about 600 pg/ml and maintained at about 10 pg/ml over 8 hours. Plasma MT concentration-time profiles were similar in shape to computer-simulated profiles. However, maximal plasma MT concentrations were three times greater compared to computer simulated curve. These results suggest that MT dose, ratio of immediate and controlled release MT, and pharmacokinetic parameters selected are adjusted to mimic endogenous MT concentration-time curve. In another study, 0.2 mg MT having 10% of immediate release portion and 80% controlled release portion produced plasma MT concentration-time curve which is more similar to endogenous profiles. A low bioavailability (<20%) may result from extensive first pass metabolism and remaining amounts of MT from controlled beads. A good correlation between plasma MT concentration and urinary excretion rate of 6-sulphatoxymelatonin (6-STMT), a major metabolite of MT was observed. As plasma MT concentration increased, urinary excretion rate of 6-STMT increased concomitantly. The linear relation between plasma MT and urinary excretion rate of 6-STMT was statistically significant. This result suggests that urinary 6-STMT may be used as an index of circadian rhythms of MT in humans.

• Korean Journal of Remote Sensing
• /
• v.33 no.1
• /
• pp.1-13
• /
• 2017

This study investigates the geometric and spatial image quality analysis of KOMPSAT-3A stereo pair. KOMPSAT-3A is, the latest satellite of KOMPSAT family, a Korean earth observation satellite operating in optical bands. A KOMPSAT-3A stereo pair was taken on 23 November, 2015 with 0.55 m ground sampling distance over Terrassa area of Spain. The convergence angle of KOMPSAT-3A stereo pair was estimated as $58.68^{\circ}$. The investigation was assessed through the evaluation of the geopositioning analysis, image quality estimation and the accuracy of automatic Digital Surface Model (DSM) generation and compared with those of KOMPSAT-3 stereo pair with the convergence angle of $44.80^{\circ}$ over the same area. First, geopositioning accuracy was tested with initial rational polynomial coefficients (RPCs) and after compensating the biases of the initial RPCs by manually collected ground control points. Then, regarding image quality, relative edge response was estimated for manually selected points visible from two stereo pairs. Both of the initial and bias-compensated positioning accuracy and the quality assessment result expressed that KOMPSAT-3A images showed higher performance than those of KOMPSAT-3 images. Finally, the accuracy of DSMs generated from KOMPSAT-3A and KOMPSAT-3 stereo pairs were examined with respect to the reference LiDAR-derived DSM. The various DSMs were generated over the whole coverage of individual stereo pairs with different grid spacing and over three types of terrain; flat, mountainous and urban area. Root mean square errors of DSM from KOMPSAT-3A pair were larger than those for KOMPSAT-3. This seems due to larger convergence angle of the KOMPSAT-3A stereo pair.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.30 no.3
• /
• pp.88-102
• /
• 2017

Objectives : The aim of this study is to review domestic clinical studies about dizziness in Korean medicine. Methods : Population key words "현훈(Hyeonhoon), 현기증(Hyeongijeung), 어지럼(Eojireom), 어지러움(Eojireoum), 실신(Silsin), 眩暈(Hyeonhoon), 眩氣症(Hyeongijeung), 失神(Silsin)" were searched on five database systems(DBpia, KISS, KMbase, NDSL, RISS) from September, 13th to September, 15th, 2016. 60 clinical studies were collected and classified by published journal, year, etiologic disease, study design, dizziness assessment tools of studies, study results, evaluation of disease pattern and process, interventions(herbal medicine and acupuncture treatment points), and number of studies which chose that prescription. Results & Conclusions : Dizziness was researched constantly since 1998 and 7 clinical stuides were issued 2007, the most. The journal which the most studies were presented was Journal of korean oriental internal medicine(12 studies over 60, 20%). Original article were 12(20.0%) and case reports were 48(80.0%) among 60 studies. BPPV was reported as a etiologic disease on 9 studies(20.45%) among 44 studies. VAS was used mainly as dizziness assessment tools of studies(26 studies over 38, 68.42%). 9 studies(15.0%) got evaluation of disease pattern and process among 60. Banhabaekchulcheonma-tang was reported as a herbal medicine prescription on 9 over 44 studies(20.45%) and ST36 was chosen acupuncture point most(24 over 45 studies, 53.33%). It doesn't have enough representativenes but has meaning to apprehend present tendency to treat dizziness in Korean medicine clinical studies.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.36-42
• /
• 2011

The wind speed at the altitude around 300 m is much higher and less variable than at the altitude around 80 m which is the same height of the MW class tower turbine's hub height. The wind power density is increased 0.37 W/$m^2$ per meter at the altitude around 6 to 7 km and 0.25 W/$m^2$ per meter at the altitude around 80 to 500 m. There are two types of power generation systems using lifting bodies. The one is that The generator is installed in the ground station and stretched into the lifting body through the tether. The other is that the generator is installed in the lifting body and stretched into the ground station through the tether. Many kinds of lifting bodies are also researched in the world, called kites, wings, single or twin aerostat, and so on. This article introduced the technical development status and the market prospects of the high altitude wind power generation system all over the world in detail.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.211-218
• /
• 2005

Switched Reluctance Motor(SRM) offers the advantages of simple and robust motor construction, high speed and high efficiency over a wide operating range of torque and speed, excellent controllability. However SRM has the disadvantages of high current harmonics, and low power factor because the required output of speed and torque is produced by the discontinuous and loss of power system, and brings about the incorrect operation of electronic system. This paper deals with an energy efficient converter fed SRM system with the reduced harmonics and improved power factor. The validity of the proposed scheme is verified via experiments. We are implemented the proposed control system using 80C196KC micro-controller.

• Journal of Environmental Health Sciences
• /
• v.8 no.2
• /
• pp.47-51
• /
• 1982

135 Raw milk samples corrected from 4 dairy plants before processing were held at 63$\circ$C for 30 minutes and 80$\circ$C for 10 minutes. Thermoduric mesophiles, psychrotrophs and thermophilic bacteria were estimated from the samples treated at 63$\circ$C for 30 minutes and aerobic spore formers from the samples treated at 80$\circ$C for 10 minutes. The results obtained were as follows. 1) The distribution of thermoduric mesophiles were $10^4 - 10^5$ cfu/ml (45.2%), $10^2 - 10^4$ cfu/ml (21.5%), $10^5$ cfu/ml over (20.7%), $10^2 - 10^3$ cfu/ml (8.9%) and $10 - 10^2$ cfu/ml (3.7%). 2) The distribution of thermoduric psychrotrophs were 10 - $10^2$ cfu/ml (40.2%), $10^2 - 10^3$ cfu/ml (29.5%), 10 cfu/ml below (22.3%) and $10^3 - 10^4$ cfu/ml (8.0%). Isolated psychrotrophs had the characteristics of Streptococcus, Micrococcus and Alcaligenes group. 3) The distribution of thermophilic bacteria were 10 cfu/ml below (91.9%), and 10 - $10^2$ cfu/ml (81.8%). 4) Aerobic spore formers counts were 10 cfu/ml below (27.4%), $10^3 - 10^4$ cfu/Illl (26.5%), $10^2 - 10^3$ cfu/ml (23.9%)and 10 - $10^2$ cfu/ml (22.1%).

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.73-82
• /
• 2013

The main objective of this study was to evaluate Representative Concentration Pathways (RCP) scenarios-based flood risk at a Si-Gun level. A bias correction using a quantile mapping method with the Generalized Extreme Value (GEV) distribution was performed to correct future precipitation data provided by the Korea Meteorological Administration (KMA). A series of proxy variables including CN80 (Number of days over 80 mm) and CX3h (Maximum precipitation during 3-hr) etc. were used to carry out flood risk assessment. Indicators were normalized by a Z-score method and weighted by factors estimated by principal component analysis (PCA). Flood risk evaluation was conducted for the four different time periods, i.e. 1990s, 2025s, 2055s, and 2085s, which correspond to 1976~2005, 2011~2040, 2041~2070, and 2071~2100. The average flood risk indices based on RCP4.5 scenario were 0.08, 0.16, 0.22, and 0.13 for the corresponding periods in the order of time, which increased steadily up to 2055s period and decreased. The average indices based on RCP8.5 scenario were 0.08, 0.23, 0.11, and 0.21, which decreased in the 2055s period and then increased again. Considering the average index during entire period of the future, RCP8.5 scenario resulted in greater risk than RCP4.5 scenario.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.177-181
• /
• 2011

We have studied structural, optical, and electrical properties of the Al-doped ZnO (AZO) thin films being usable in transparent conducting oxides. The AZO thin films were deposited on the corning 1737 glass plate by the RF magnetron sputtering system. To find optimal properties of AZO for transparent conducting oxides, the RF power in sputtering process was varied as 40 W, 60 W, and 80 W, respectively. As RF power increased, the crystallinity of AZO thin film was decreased, the optical bandgap of AZO thin film increased. The transmittance of the film was over 80% in the visible light range regardless of the changes in RF power. The measurement of Hall effect characterizes the whole thin film as n-type, and the electrical property was improved with increasing RF power. The structural, optical, and electrical properties of the AZO thin films were affected by Al dopant content in AZO thin film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.837-843
• /
• 2009

$TiO_2$(2 wt.%)-doped ZnO(TZO) films with thickness from 100 nm to 500 nm were prepared on polyethylene naphthalate(PEN) substrate under various rf-power range from 40 W to 80 W. Their electrical and optical properties were investigated as a function of rf-power. We think that these properties were closely related with the crystallization and the film density of TZO films. It was also presumed that the vaporization of the water vapor and other adsorbed particles such as an organic solvents can affect the electrical properties of the conventional transparent conductive oxide(TCO) films. On the other hand, since the TZO film deposited on glass substrate at room temperature with rf-power of 80 W shows a very low resistivity of $7.5\times10^{-4}\;\Omega{\cdot}cm$ and a very excellent transmittance over an average 85% in the visible range, that is comparable to that of ITO films. Therefore, we expect that the TZO films can be used as transparent electrode for optoelectronic devices such as touch-panels, flat-panel displays, and thin-film solar cells.